Components

SKU: SF-PRT-10550 | Brand: SparkFun

BNC connectors are ideal for quick connects to audio coax and high-frequency signal lines. This is a right-angle connector and comes with a lock washer and nut. Documents: Dimensional Drawing

SKU: PL-1915 | Brand: Pololu

These 2×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable fourteen-wire...

SKU: AF-3341 | Brand: Adafruit

These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They're mini versions of the ones in our digital DotStart strips and matrices wi...

SKU: SF-WRL-12861 | Brand: SparkFun

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough...

SKU: PL-1908 | Brand: Pololu

These 1×9-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable nine-wire con...

SKU: AF-3342 | Brand: Adafruit

This 2×40 right-angle edge connector fits directly onto the bottom edge contacts of the BBC micro:bit, providing access to all GPIO pins, power, and ground connections. The right-angle design is ideal for mounting on ...

SKU: SF-PRT-10462 | Brand: SparkFun

Nylon standoffs for mounting PCBs in enclosures or elevating boards off work surfaces. These ¾" (19mm) long standoffs are tapped for 4-40 screws and sold in a pack of 10. Key Features Nylon Construction – Non-condu...

SKU: SF-PRT-10463 | Brand: SparkFun

Metal Hex Male/Female standoffs. #4-40 thread with 3/8" shank and 3/16" thread length. Can be stacked to create any length. Pack of 10

SKU: SF-PRT-10453 | Brand: SparkFun

There are your standard Philips-head 4-40 screws. They are ¼" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SKU: PL-1906 | Brand: Pololu

These 1×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable seven-wire co...

SKU: SF-PRT-10450 | Brand: SparkFun

Standard Philips-head 4-40 screws. They are 1" long and come in packs of ten. This is the screw size we use in most of the holes for our breakout boards. Check below for other associated hardware.

SKU: AF-593 | Brand: Adafruit

The MCP23008 is an I2C 8-bit I/O port expander that adds 8 general-purpose pins to your microcontroller using just two I2C lines (shared with other I2C devices). Each pin can be configured as input, output, or input w...

SKU: AF-1873 | Brand: Adafruit

A 16 MHz ceramic resonator with built-in load capacitors, providing a simple clock source for microcontrollers. The 3-pin package has 0.1" (2.54 mm) pin spacing for direct breadboard use — connect the two outer pins t...

SKU: AF-3347 | Brand: Adafruit

A pack of 10 tactile push buttons with a polished metal ball actuator, giving them a distinctive industrial look. The rounded top also makes them forgiving when pressed at an angle — useful for mechanical actuator set...

SKU: AF-1885 | Brand: Adafruit

When I was studying power supply electronics in school, the instructor always talked about adding BFC's to the circuit - Big Freakin' Capacitors. This here is UHFC - Unbelievably Huge Freaking Capacitor. If you have a...

SKU: SF-PRT-12791 | Brand: SparkFun

This is a 2x23 pin male PTH header. This piece is in the common configuration for Beaglebone Black headers that can be broken apart to form smaller header formations. Each pin has a spacing of 0.1" in between each oth...

SKU: AF-610 | Brand: Adafruit

A panel-mount DC barrel jack that accepts standard 2.1 mm power plugs. The extra-long threaded body fits panels up to 8 mm thick (5/16″), making it suitable for wooden enclosures and thicker project boxes — not just s...

SKU: AF-1798 | Brand: Adafruit

A 2.5mm stereo (TRS) plug connector for building or repairing custom audio cables. The durable metal construction and flexible spring strain relief ensure a long-lasting, professional result. The 2.5mm plug is a less...

SKU: AF-1799 | Brand: Adafruit

A solder-on 3.5 mm (1/8") TRRS plug for building custom audio cables. Made from durable metal with a flexible spring strain relief, it provides a solid, professional-quality connection. Solder your wires to the four c...

SKU: SF-PRT-10370 | Brand: SparkFun

This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway header...