CircuitPython

SKU: AF-5778 | Brand: Adafruit

The Adafruit Matrix Portal S3 is the next-generation plug-and-play controller for HUB-75 RGB LED matrix panels. Powered by the ESP32-S3 with built-in WiFi and Bluetooth LE, it plugs directly into the back of any compa...

SKU: AF-4900 | Brand: Adafruit

The Adafruit QT Py RP2040 puts the popular Raspberry Pi RP2040 chip into the tiny QT Py form factor. With dual-core ARM Cortex-M0+ running at 125 MHz, 264 KB SRAM, 8 MB flash, native USB, and a STEMMA QT connector, it...

SKU: AF-3857 | Brand: Adafruit

The Feather M4 Express is built around the ATSAMD51J19, a 120 MHz Cortex M4 processor with hardware floating point and DSP instructions, 512 KB flash, and 192 KB RAM. It ships with CircuitPython pre-loaded — plug it i...

SKU: AF-5768 | Brand: Adafruit

The Adafruit RP2040 Prop-Maker Feather is an all-in-one board designed for building props, cosplay pieces, lightsabers, animatronics, and interactive toys. It combines the RP2040 microcontroller with a prop-making too...

SKU: AF-3501 | Brand: Adafruit

The Adafruit GEMMA M0 is a tiny, coin-sized microcontroller board designed for wearable electronics and small projects. Despite its quarter-sized footprint, it packs serious power with an ATSAMD21E18 32-bit Cortex M0+...

SKU: AF-3500 | Brand: Adafruit

The Adafruit Trinket M0 is a tiny but powerful microcontroller board built around the ATSAMD21E18 32-bit Cortex M0+ processor. It shares the same compact form factor and pinout as the original Trinket, but with a mass...

SKU: AF-3333 | Brand: Adafruit

The Circuit Playground Express is an all-in-one development board packed with sensors, LEDs, and a speaker — all on a round, beginner-friendly PCB with alligator-clip pads. No soldering required. It supports four prog...

SKU: AF-5056 | Brand: Adafruit

The Adafruit Trinkey QT2040 is an RP2040-based microcontroller that plugs directly into any USB-A port on your computer or laptop. With a STEMMA QT / Qwiic connector on the end, it turns any I2C sensor or accessory in...

SKU: AF-3619 | Brand: Adafruit

Aww yeah, it's the Feather you have been waiting for, and now with stacking headers! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: bui...

SKU: AF-4870 | Brand: Adafruit

The Adafruit Neo Trinkey is a tiny USB-A development board featuring an ATSAMD21 microcontroller and four RGB NeoPixel LEDs. Just plug it into any USB-A port on a computer or laptop and you've got a programmable, colo...

SKU: AF-4800 | Brand: Adafruit

The Adafruit MagTag is a WiFi-connected E-Ink display board powered by the ESP32-S2. Its 2.9" grayscale display retains its image even when power is removed, making it perfect for low-power IoT dashboards, status boar...

SKU: AF-3800 | Brand: Adafruit

The Adafruit ItsyBitsy M4 Express is a high-performance microcontroller board powered by the ATSAMD51 Cortex M4 running at 120 MHz with hardware floating point and DSP support. Packed into a tiny 1.4" × 0.7" form fact...

SKU: AF-3105 | Brand: Adafruit

A compact, breadboard-friendly illuminated tactile switch featuring a blue LED that shines through a universal power symbol on top. Adds both a momentary pushbutton and a colourful indicator to your project in a singl...

SKU: SF-DEV-14713 | Brand: SparkFun

The SparkFun Thing Plus SAMD51 is a development board built around the ATSAMD51J20 — a 32-bit ARM Cortex-M4F microcontroller with floating point unit, running at up to 120 MHz. It offers substantial processing power i...

SKU: AF-3093 | Brand: Adafruit

The Adafruit CRICKIT for Circuit Playground Express is a robotics and electronics driver board that bolts directly onto a Circuit Playground Express. It adds motor drivers, servo outputs, capacitive touch inputs, NeoP...

SKU: AF-1500 | Brand: Adafruit

The Adafruit Trinket 3V3 is a tiny microcontroller board built around the Atmel ATtiny85 processor. At just 27mm × 15mm, it's small enough to fit into virtually any project and affordable enough to dedicate to a singl...

SKU: AF-5912 | Brand: Adafruit

The Adafruit SHT41 Trinkey is a tiny USB A device that combines an ATSAMD21 microcontroller with a Sensirion SHT41 temperature and humidity sensor. Simply plug it into any USB A port on your computer and start reading...

SKU: AF-4819 | Brand: Adafruit

The Adafruit MagTag Starter Kit bundles everything you need to get started with the MagTag WiFi E-Ink display. The ESP32-S2-powered board features a 2.9" grayscale E-Ink screen that retains its image even when power i...

SKU: AF-5020 | Brand: Adafruit

The Adafruit NeoKey Trinkey is a USB-A development board that combines an ATSAMD21 microcontroller, a Cherry MX-compatible key switch footprint, and an RGB NeoPixel LED into one tiny plug-in package. Insert it into an...

SKU: AF-3816 | Brand: Adafruit

This bolt-on hardware kit provides M3 standoffs and screws for securely mounting a Circuit Playground Express, Circuit Playground Classic, micro:bit, Gemma M0, Flora, or other small circular/compact boards to your pro...