Charging Cables

SKU: DF-FIT0265 | Brand: DFRobot

Micro USB 2.0 to USB type A cable, a standard USB connector for cellphones, Arduino Leonardo or other embeded boards to common computer connector. This is a consumer standard, smaller connector for USB devices. Mic...

SKU: AF-900 | Brand: Adafruit

A short USB 2.0 Type-A to Type-B cable, 150 mm (6") in length. Ideal for connecting Arduino boards, programmers, and other USB-B devices to a computer in compact setups where a full-length cable is unnecessary. Key F...

SKU: LB-PTRT | Brand: Little Bird

A 100 cm USB A-to-B cable with a right-angle Type-B connector, ideal for tight spaces where a straight connector won't fit. Works with Arduino Uno, Mega, printers, and other devices that use the standard USB Type-B po...

SKU: SF-TOL-08639 | Brand: SparkFun

A USB-A to 5.5 × 2.1 mm barrel jack adapter cable for powering development boards and small devices from any USB port. Centre-positive polarity, delivering up to 5 V at 500 mA (per USB specification). Specifications ...

SKU: AF-2897 | Brand: Adafruit

A simple adapter that sits inside a 5.5 / 2.5 mm DC barrel jack, allowing you to use a standard 5.5 / 2.1 mm barrel plug with it. Just insert the adapter into the device's 2.5 mm jack, then plug in your 2.1 mm power s...

SKU: AF-899 | Brand: Adafruit

A compact 6" (approx. 15cm) USB Type-A to Mini-B cable for USB 1.1 and 2.0 connections. Ideal for keeping on the bench when you need a short, tidy cable to connect to Teensy boards, USB LiPo chargers, or other Mini-B ...

SKU: SF-CAB-24507 | Brand: SparkFun

A short 300mm USB Type-A to Micro-B cable for programming and powering the BBC micro:bit. Supports USB 2.0 data transfer at up to 480Mb/s. Green colour makes it easy to identify at a glance on a busy desk or in a clas...

SKU: LB-LS4548 | Brand: Little Bird

A standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector, there's a right angle bend. We thought this might make a good pair for a...

SKU: AF-5523 | Brand: Adafruit

This is a magnetic USB micro b plug! They pair with the Black Woven USB A or Type-C to Type-C Cable with Magnetic Tip . Plug your microUSB power (or data!) cable into one end, then insert the little magnetic nub into ...

SKU: AF-2379 | Brand: Adafruit

A USB-A to Micro-B power-only cable with a built-in inline on/off switch. Perfect for powering a Raspberry Pi or any Micro USB device from a USB power supply, with the convenience of a physical power switch — no need ...

SKU: SF-CAB-14276 | Brand: SparkFun

USB On-The-Go (OTG) is a really useful USB specification! It allows some small devices that would normally be unable to act as a host to have limited hosting capabilities! USB OTG is common for things like tablet c...

SKU: SS-321010018 | Brand: Seeed Studio

This product is apply to USB HUB,Mini speaker,Power Bank,MP3,MP4,MP5.  It can be used to charge.   Features: DC 3.5*1.35mm connector 100cm in length USB Charging Use to DC 3.5mm charge port Wire Di...

SKU: AF-2789 | Brand: Adafruit

The premise of this MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other. This allows you ...

SKU: AF-2777 | Brand: Adafruit

This USB to DC booster cable has an integrated boost converter that steps up 5V USB power to 9V DC, output through a centre-positive 2.1 mm barrel jack. It's a convenient way to power 9V devices from any USB port — wh...

SKU: AF-5412 | Brand: Adafruit

If you love power adapters or toys & gadgets that have magnetic connections, you can now experiment with these futuristic connectors easily. This is a DIY "MagSafe-styled" USB cable, with four 0.1" spaced contact pogo...

SKU: AF-4009 | Brand: Adafruit

This USB A to Micro-B cable looks like any other at first glance — but plug it in and dozens of tiny LEDs embedded along the cable light up in blue and green. It's functional and fully supports both data transfer and ...

SKU: LB-LR0293-3 | Brand: Little Bird

An 80 cm USB-A to Micro USB cable for data transfer and charging. Compatible with development boards such as the Arduino Leonardo, as well as Raspberry Pi, mobile devices, and other electronics that use a Micro USB co...

SKU: AT-P1906 | Brand: Little Bird

A 1.5 m USB 2.0 cable with a Type-A male connector on one end and a Micro-B male connector on the other, rated for up to 3 A of current. Designed for powering Raspberry Pi boards and other devices or projects that req...

SKU: AF-2185 | Brand: Adafruit

This is your standard USB A-Plug to Micro-USB cable. It's 2 meters long so you'll have plenty of cord to work with for those longer extensions. Perfect for connecting to your Raspberry Pi, Arduino Leonard...

SKU: PI-CAB0226 | Brand: Pimoroni

A 50 cm USB-A to Micro-B cable in matte black with a TPE cable shroud. Features 22 AWG power lines for low voltage drop, making it well suited for powering microcontrollers and development boards. Specifications Co...