Brands

SKU: AF-2895 | Brand: Adafruit

The Adafruit Non-Latching Mini Relay FeatherWing lets you control mains-powered devices and small appliances using any Feather microcontroller. Switch lamps, fans, solenoids, and other loads rated up to 250 VAC or DC ...

SKU: DF-DFR0280 | Brand: DFRobot

Sharp GP2Y1010AU Dust Sensor requires some wiring on the breadboard and a list of components to make it Arduino compatible. This has turned down several people due to the thin wires of the sharp sensor making it ...

SKU: AF-3078 | Brand: Adafruit

The Feather 32u4 RFM95 LoRa Radio (868/915 MHz) combines an ATmega32u4 microcontroller with an SX1276 LoRa radio transceiver, USB connectivity, and LiPo battery charging. LoRa modulation provides dramatically longer r...

SKU: DF-SEN0128 | Brand: DFRobot

An analogue alcohol gas sensor based on the MQ-3 probe, designed for use with Arduino and other microcontrollers. The sensor outputs a voltage proportional to the concentration of alcohol vapour in the surrounding air...

SKU: AF-3088 | Brand: Adafruit

The Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing makes it easy to add a numeric display to any Feather project. The HT16K33 driver handles all LED multiplexing over I2C, so your Feather only needs two sha...

SKU: SF-GPS-13670 | Brand: SparkFun

The GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 second cold start time, the GP735 is a tiny, yet powerful, piece of tech. The slim de...

SKU: DF-FIT0369 | Brand: DFRobot

This High Speed HDMI Cable provides a one-cable solution for many of your home entertainment needs. As a versatile HDMI cable, it provides high-definition quality for not only home entertainment networking, but als...

SKU: DF-FIT0385-WW | Brand: DFRobot

The Star Series LED Strand features 100 warm white LED pixels on a thin, pliable copper wire. Spaced 5cm apart across a 5-metre length, the strand is flexible enough to shape around objects yet sturdy enough to hold i...

SKU: DF-FIT0378 | Brand: DFRobot

Sumo Robots, roll out! Built for Sumo Robot fight, Sumo Bumper for MiniQ 2WD is a quick add-on that turns your miniQ into a sumo fighter. During the game, each little pusher will locate and knock its opponent right o...

SKU: AF-327 | Brand: Adafruit

A 1.5-metre (5 ft) extension cable with a 5.5 / 2.1 mm barrel jack (female) on one end and a barrel plug (male) on the other. Heavy-duty 24 AWG wires handle up to 5 A, making it suitable for powering LED strips, Ardui...

SKU: AF-397 | Brand: Adafruit

This camera module can be a pretty neat project addition. It was designed to be used in security systems and does two main things - it outputs NTSC video and can take snapshots of that video (in color) and transmit...

SKU: AF-3198 | Brand: Adafruit

Are you concerned that your smokin' hot soldering skills will set your project alight? There is no more need to fear the heat! These High-Temperature PTFE Jaws are a great hack for your PCB Stickvise, keeping ...

SKU: AF-306 | Brand: Adafruit

These LED strips are fun and glowy. There are 32 RGB LEDs per meter, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. You can set the color of each ...

SKU: AF-425 | Brand: Adafruit

A 4-pin Molex power cable that matches the hard drive/CD-ROM power connectors found on AT and ATX power supplies. Use it to tap into 5V or 12V DC from a desktop power supply for your projects — a convenient source of ...

SKU: SF-PRT-10853 | Brand: SparkFun

This is a wire assembly terminated with the same 8-pin JST-SH connector which is on the Mega Pro Mini. Pick up a few of these to break out all of those pesky pins. Integrating these connectors into your projects ma...

SKU: SF-PRT-10739 | Brand: SparkFun

Metal short standoffs: 3/8" long x ¼"OD. Used to get your proto board up off the table. #4-40 thread. Fits all development boards with available holes. Don’t forget the screws! Related below. Note: These are sold as a...

SKU: AF-499 | Brand: Adafruit

This 20×4 character LCD features black text on a full-colour RGB backlight that you can set to any colour — red, green, blue, purple, teal, white, and everything in between. It's the most daylight-readable character L...

SKU: DF-SEN0186 | Brand: DFRobot

INTRODUCTION  Ever want to build your own weather station? This iot weather station kit includess anemometer, wind vane and rain bucket. The serial communication method provides good compatibility and ma...

SKU: DF-DFR0369 | Brand: DFRobot

This 4.3-inch e-ink display module from DFRobot supports 800×600 resolution and communicates via serial (UART), making it straightforward to integrate with microcontrollers. It features built-in Chinese and English fo...

SKU: AF-3354 | Brand: Adafruit

The Rainbow HAT from Pimoroni has a buffet of sensors, inputs, and displays to explore Android Things™. Use it as a weather station, a clock, a timer or stopwatch, a mood light, or endless other things.Pimoroni collab...