Brands

SKU: SF-ROB-11884 | Brand: SparkFun

This is the classic Hitec HS-422 servo. This solid consumer grade servo is able to take in 6 volts and deliver 57 oz-in. of maximum torque at 0.16 sec/60°, this is a simple servo for any beginner project!This high qua...

SKU: PL-1268 | Brand: Pololu

The Pololu MinIMU-9 v2 is a compact (0.8″ × 0.5″) board that combines ST’s L3GD20 3-axis gyroscope and LSM303DLHC 3-axis accelerometer and 3-axis magnetometer to form an inertial measurement unit (IMU); we therefore r...

SKU: PL-1265 | Brand: Pololu

This board has been replaced by the newer MinIMU-9 v2 L3GD20 and LSM303DLHC carrier, which offers improved magnetic sensing resolution, a wider acceleration measurement range, and gyro measurements that are more resis...

SKU: SF-LCD-00570 | Brand: SparkFun

This is the itty-bitty connector for the Nokia color LCD. 10-Pins. Surface mount. Hard to find. 0.5mm pitch so be careful. Can it be soldered by hand? Yes! Owen managed to solder wire wrap wire to the individual legs ...

SKU: SF-COM-00539 | Brand: SparkFun

Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability. Low profile HC49/US Package.

SKU: SF-COM-00540 | Brand: SparkFun

Standard ‘Watch’ or Real-Time-Clock crystal. 32.768kHz means it is precisely half of a 16-bit counter. Start counting at 0x8000 (or 32768). When the counter rolls over from 65535 to 0, then you know that exactly one s...

SKU: SF-COM-00535 | Brand: SparkFun

Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability. Low profile HC49/US Package.

SKU: SF-SEN-11859 | Brand: SparkFun

This is not your typical temperature sensor. The TMP006 Breakout can measure the temperature of an object without making contact with it. By using a thermopile to detect and absorb the infrared energy an object is emi...

SKU: PL-1245 | Brand: Pololu

The Satellite Module 003 is an RGB LED round “pixel” with three bright surface-mount RGB LEDs. This LED module is designed to be used with the OctoBrite DEFILIPPI to easily integrate full-color LED lighting into your...

SKU: PL-1239 | Brand: Pololu

A 300mm (12") six-conductor female-to-female cable designed for chaining ShiftBrite and ShiftBar LED modules. The cable wires are colour-coded to match the ShiftBrite pinout, with black for ground and red for power. ...

SKU: PL-1242 | Brand: Pololu

The ShiftBar is a medium-power RGB LED controller featuring 10-bit digital brightness control on each color channel (over one billion colors). Multiple ShiftBar modules can be chained together and controlled from a si...

SKU: DF-FIT0328 | Brand: DFRobot

A 2.7" white OLED display module with 128×64 pixel resolution, driven by the SSD1325 controller. The OLED technology delivers deep blacks, wide viewing angles, and a slim profile — with no backlight required, the disp...

SKU: SF-DEV-11814 | Brand: SparkFun

The µUSB-PA5 is a compact USB-to-Serial TTL UART bridge based on the FTDI FT232RQ. It connects to your PC via a Mini-B USB connector and provides serial communication at baud rates up to 3 Mbps — designed primarily fo...

SKU: SF-KIT-13863 | Brand: SparkFun

The SparkFun PicoBoard Starter Kit is your go-to source to begin learning everything about the SparkFun PicoBoard and the Scratch programming environment. This kit includes your very own PicoBoard, multiple pieces ...

SKU: DF-SEN0164 | Brand: DFRobot

This adjustable infrared sensor features a high-sensitivity photoreflector to perform distance detection function,ranging from 3cm to 50cm. When the infrared light emitted by the emitter gets reflected on a surface...

SKU: SF-BOB-00496 | Brand: SparkFun

The SparkFun SOIC to DIP Adapter converts 28-pin SOIC surface-mount packages to standard 0.1" through-hole headers, making it easy to prototype with SMD ICs on breadboards or in DIP sockets. Key Features 28-Pin SOI...

SKU: SF-SEN-11769 | Brand: SparkFun

The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measurin...

SKU: SF-SEN-00251 | Brand: SparkFun

36" high temperature Type-K Thermocouple with glass braid insulation.

SKU: SF-BOB-11722 | Brand: SparkFun

This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to standard, breadboard friendly, 0.1" headers. Turn it over and it has a foo...

SKU: DF-DFR0008 | Brand: DFRobot

The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module(SKU:TEL0005) interface...