Brands and Manufacturers

SKU: AF-693 | Brand: Adafruit

Show your support for the open-source hardware movement with this glossy vinyl sticker featuring the Open Source Hardware logo. Originally designed for the 2011 Open Hardware Summit, this iconic gear-shaped logo repre...

SKU: SF-PRT-12638 | Brand: SparkFun

A 4-pin right-angle male header for surface-mount applications, with standard 0.1" (2.54 mm) pin spacing. Key Features 4-Pin Male Header – Right-angle, surface mount 0.1" (2.54 mm) Pitch – Standard spacing between...

SKU: AF-1912 | Brand: Adafruit

A four-digit 0.54-inch blue alphanumeric LED display with an I2C backpack. Each digit has 14 segments, allowing it to display letters, numbers, and basic symbols. The bright blue LEDs on a black surface are readable f...

SKU: SF-ROB-12629 | Brand: SparkFun

The DAGU Wheel Encoder Kit is a simple add-on for wheeled robots that measures speed and distance travelled. Each kit includes two neodymium 8-pole magnets with rubber hubs and two hall-effect sensors, providing relia...

SKU: LB-PRT-12618 | Brand: Little Bird

An enclosed coin cell battery holder for two CR2032 batteries wired in series, delivering up to 6 V output. The holder features a built-in on/off slide switch and two 150 mm (6″) power leads (positive and negative). A...

SKU: AF-3444 | Brand: Adafruit

The Adafruit DotStar High Density 8×8 Grid packs 64 individually addressable RGB LEDs into a compact 25.4 mm × 25.4 mm (1" × 1") square. Each DotStar pixel features a built-in PWM driver and is controlled via a 2-wire...

SKU: SF-PRT-10114 | Brand: SparkFun

These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snug...

SKU: AF-716 | Brand: Adafruit

This Arduino shield kit combines a 16×2 RGB character LCD with five navigation buttons, all controlled over I2C using just two pins (Analog 4 and 5). An on-board I2C port expander handles the LCD, RGB backlight, and k...

SKU: DF-DFR0375 | Brand: DFRobot

INTRODUCTION The Cookie I/O expansion shield is designed for beginners to electronics. The shield is directly compatible with the gravity series. We have implemented fail-safe systems to pre...

SKU: DF-DFR0423 | Brand: DFRobot

INTRODUCTION This module is a self-locking switch. Press the button to turn it to the "on" state and press it again to turn it to the "off" state. The board has immersion gold plating and...

SKU: SF-COM-10079 | Brand: SparkFun

RTC stands for real time clock folks. The DS3234 is a low-cost, extremely accurate SPI bus RTC with an integrated temperature compensated crystal oscillator (TCXO) and crystal.

SKU: SF-COM-10049 | Brand: SparkFun

We all know that you can never get too many LEDs. Don’t worry, we’ve got you covered. This is a pack of basic red and yellow LEDs (10 of each) all conveniently packaged in a nice reusable ESD safe bag. Includes: 10...

SKU: DF-DFR0445 | Brand: DFRobot

RPLIDAR A2 is the next generation low cost 360 degree 2D laser scanner (LIDAR) solution developed by SLAMTEC. It can take up to 4000 samples of laser ranging per second with high rotation speed. And equipped with S...

SKU: AF-1937 | Brand: Adafruit

Is your house haunted? Or, rather, are you convinced that your house is haunted but have never been able to prove it since you've never had a camera that integrated with your raspberry pi but was still small enough...

SKU: SF-SEN-12589 | Brand: SparkFun

The SparkFun RedBot Accelerometer is an add-on sensor that provides bump and motion detection for the RedBot platform. It measures acceleration forces on the X, Y, and Z axes using the MMA8452Q triple-axis acceleromet...

SKU: SF-SEN-09963 | Brand: SparkFun

The SparkFun RFID USB Reader is a simple to use, USB to serial base unit for the ID-3LA, ID-12LA, and ID-20LA readers. Simply plug a reader into the headers and attach a miniUSB cable. Open a terminal program of your ...

SKU: SF-BOB-09966 | Brand: SparkFun

A simple breakout board for the USB Mini-B connector, bringing all 5 pins out to a breadboard-friendly 0.1" pitch header. Useful for prototyping USB connections or as a convenient 5V power source (up to 100 mA, unregu...

SKU: AF-196 | Brand: Adafruit

The Proto-ScrewShield is a dual-purpose Arduino prototyping shield that combines a large through-hole prototyping area with screw terminal breakouts for every Arduino pin. Instead of soldering wires directly, you get ...

SKU: DF-SEN0198 | Brand: DFRobot

What sensor should you use when you need to measure temperature? Most people will think of a DS18B20 temperature sensor first, but this sensor is only capable of measuring temperatures up to 125C. In order to me...

SKU: SF-SEN-12566 | Brand: SparkFun

The ALS-PT19 is a compact SMD ambient light sensor, significantly smaller than standard through-hole alternatives like the TEMT6000. Functioning as an NPN phototransistor, it provides an analogue voltage output propor...