Brands and Manufacturers

SKU: DF-DFR0008 | Brand: DFRobot

The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module(SKU:TEL0005) interface...

SKU: PL-2179 | Brand: Pololu

This connector, a smaller version of the male Tamiya plug, is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that ...

SKU: SF-WRL-00144 | Brand: SparkFun

A tiny 2.4 GHz ceramic chip antenna designed for surface-mount PCB layouts. While it won't match the range of a full-size rubber duck antenna, its extremely compact footprint lets you add wireless capability to space-...

SKU: DF-DFR0061 | Brand: DFRobot

The Gravity Joystick Module V2 provides two-axis analogue control (X and Y) plus a digital push-button switch. Connect the two analogue outputs and one digital output to your Arduino or other microcontroller for intui...

SKU: AF-2895 | Brand: Adafruit

The Adafruit Non-Latching Mini Relay FeatherWing lets you control mains-powered devices and small appliances using any Feather microcontroller. Switch lamps, fans, solenoids, and other loads rated up to 250 VAC or DC ...

SKU: SF-DEV-13741 | Brand: SparkFun

In 2015 we developed the BadgerStick as a fun and interactive way for people to learn about soldering and engage with SparkFun products at the multiple trade shows we appeared at. In 2016 we have refined the BadgerSti...

SKU: AF-3078 | Brand: Adafruit

The Feather 32u4 RFM95 LoRa Radio (868/915 MHz) combines an ATmega32u4 microcontroller with an SX1276 LoRa radio transceiver, USB connectivity, and LiPo battery charging. LoRa modulation provides dramatically longer r...

SKU: PL-2145 | Brand: Pololu

The HD-1600A analog servo from Power HD is a great general-purpose micro servo at a great price. Servo horns and associated hardware are included.Key specs at 6 V: 0.10 sec/60°, 18 oz-in (1.3 kg-c...

SKU: DF-SEN0128 | Brand: DFRobot

An analogue alcohol gas sensor based on the MQ-3 probe, designed for use with Arduino and other microcontrollers. The sensor outputs a voltage proportional to the concentration of alcohol vapour in the surrounding air...

SKU: AF-3099 | Brand: Adafruit

Snap, snap! The Camera v2 is the new official camera board released by the Raspberry Pi Foundation! The Raspberry Pi Camera Board v2 is a high quality 8 megapixel Sony IMX219 image sensor custom designed add-on boa...

SKU: SF-DEV-11520 | Brand: SparkFun

The Fio v3 is a new spin on the Arduino Fio hardware powered by the ATmega32U4.Not only is it small and LiPo-ready, it’s a very capable XBee-ready development board. The JST-connector and 3.3v system voltage make th...

SKU: AF-3088 | Brand: Adafruit

The Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing makes it easy to add a numeric display to any Feather project. The HT16K33 driver handles all LED multiplexing over I2C, so your Feather only needs two sha...

SKU: SF-GPS-13670 | Brand: SparkFun

The GP-735 is a slim, ultra-high performance, easy to use GPS smart antenna receiver. With -162dBm tracking sensitivity and only 29 second cold start time, the GP735 is a tiny, yet powerful, piece of tech. The slim de...

SKU: AF-3090 | Brand: Adafruit

Create a compact 8×16 LED matrix display for any Feather board with this FeatherWing driver. The HT16K33 I2C driver handles all multiplexing for two 0.8" mini 8×8 LED matrices (128 LEDs total), controlled over just tw...

SKU: AF-3097 | Brand: Adafruit

Looking to improve the printing bed on your Flashforge Creator Pro? Check out the PRINTinZ Skin for Flashforge! The PRINTinZ Skin is a peel and stick surface for 3D printer beds made from the sam...

SKU: PL-1100 | Brand: Pololu

A Pololu micro metal gearmotor with a 5:1 gear ratio and low-power (LP) 6V motor. The LP motor variant uses precious metal brushes and draws the least current of the micro metal gearmotor family, making it well-suited...

SKU: SF-COM-13639 | Brand: SparkFun

A pack of two SPDT mini microswitches with a small push-button actuator. These 3-terminal switches have a tactile click and are commonly used as limit switches in 3D printers, sliders, and robot projects. Specificati...

SKU: SF-DEV-13629 | Brand: SparkFun

This is the SparkFun Photon IMU Shield, a versatile motion-sensing add-on board for your Photon device. Each IMU shield is equipped with an on-board LSM9DS1 system-in-a-chip that houses a 3-axis accelerometer, 3-axis ...

SKU: SF-DEV-13628 | Brand: SparkFun

The SparkFun Photon Micro OLED Shield breaks out a small monochrome, blue-on-black OLED to use with your Photon module. It’s “micro”, but it still packs a punch – the OLED display is crisp, and you can fit a deceiving...

SKU: SF-PRT-13612 | Brand: SparkFun

This Thermocouple Connector is perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB. This little connector is actually the exact part we recommend using with our SparkFun Th...