Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Pogo Pins Crown Head (10 pack) [P75-H2]
SKU: AF-2429 | Brand: Adafruit
Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...
Delivered by Mon 29 Jun
Adafruit METRO 328 with Headers [ATmega328]
SKU: AF-2488 | Brand: Adafruit
The Adafruit METRO 328 is a fully assembled, Arduino UNO R3-compatible development board powered by the ATmega328P running at 16 MHz. It's shape and pin-compatible with Arduino UNO R3 shields, and works directly with ...
Delivered by Mon 29 Jun
Hand-Moldable Plastic - Low Temperature Thermoplastic [100g Bag]
SKU: AF-2504 | Brand: Adafruit
Low-temperature thermoplastic beads (also known as Polymorph, Instamorph, or Friendly Plastic) that become moldable when heated to approximately 60 °C (140 °F). Simply heat in hot water until the beads turn clear and ...
Delivered by Fri 17 Jul
Mini Solderless Breadboard - 4x4 Points
SKU: AF-2463 | Brand: Adafruit
Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 4x4 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to have...
Delivered by Fri 17 Jul
Gravity: Analog Signal Isolator
SKU: DF-DFR0504 | Brand: DFRobot
The Analog Signal Isolator can isolate analog signal and provide isolated power to sensors. It can effectively prevent sensor signal interference and apply to multi-parameter water quality monitoring sensors. Because...
Delivered by Mon 29 Jun
Chip Quik Tack Flux 10cc Syringe with Plunger and Tip [SMD291]
SKU: AF-2667 | Brand: Adafruit
Chip Quik SMD291 tack flux in a convenient 10 cc syringe with plunger and dispensing tip. This synthetic no-clean flux is ideal for all rework, soldering, desoldering, and reflow applications — it stays where you appl...
Delivered by Fri 17 Jul
Concave Button - Green
SKU: SF-COM-09341 | Brand: SparkFun
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel.
Delivered by Mon 29 Jun
Concave Button - Blue
SKU: SF-COM-09337 | Brand: SparkFun
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel.Features: Concave plunger design D...
Delivered by Mon 29 Jun
Concave Button - Red
SKU: SF-COM-09336 | Brand: SparkFun
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel.Features: Concave plunger design D...
Delivered by Mon 29 Jun
Missile Switch Cover - Red
SKU: SF-COM-09278 | Brand: SparkFun
It’s not what project you have in mind that may use a rocket launch switch… The question is what project will you come up with once you have one in hand? Everyone has a proverbial missile to launch.The hot red safety ...
Delivered by Mon 29 Jun
Rotary Potentiometer - Linear (10k ohm)
SKU: SF-COM-09288 | Brand: SparkFun
An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies from...
Delivered by Mon 29 Jun
Arduino Stackable Header - 8-pin
SKU: SF-PRT-09279 | Brand: SparkFun
This is a 8-pin female header, with extra long legs – great for stacking Arduino shields. Pins are spaced by 0.1". Documents: Datasheet
Delivered by Mon 29 Jun
Piezo Vibration Sensor - Large
SKU: SF-SEN-09196 | Brand: SparkFun
This basic piezo sensor from Measurement Specialties is often used for flex, touch, vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple...
Delivered by Mon 29 Jun
Arcade Joystick - Short Handle
SKU: SF-COM-09182 | Brand: SparkFun
This short-handle arcade joystick is a heavy-duty 4-way input in the classic Pac-Man style. Built from ABS plastic and solid alloy, it delivers a great feel with rugged construction that stands up to intense gameplay....
Delivered by Mon 29 Jun
Speaker - 0.5W (8 Ohm)
SKU: SF-COM-09151 | Brand: SparkFun
A compact 0.5W speaker with 8 ohm impedance, small enough to fit inside robot builds, enclosures, and portable electronics projects. Suitable for audio output from amplifier boards, microcontrollers with DAC/PWM audio...
Delivered by Mon 29 Jun
SparkFun Opto-isolator Breakout
SKU: SF-BOB-09118 | Brand: SparkFun
This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. This board electrically isolates a controller from the h...
Delivered by Mon 29 Jun
Thumb Joystick
SKU: SF-COM-09032 | Brand: SparkFun
This is a joystick very similar to the ‘analog’ joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers - one for each axis. Pots are ~10k each. This joystick also has a se...
Delivered by Mon 29 Jun
Header - 6-pin Male (SMD, 0.1, Right Angle)
SKU: SF-PRT-09015 | Brand: SparkFun
A surface-mount 6-pin right-angle male header with standard 2.54 mm (0.1 in) pitch between pins and between rows. Ideal for adding a programming or serial header to compact PCB designs where a low-profile, right-angle...
Delivered by Mon 29 Jun
AL Heat Sink (With adhesive tape) - 13*13*7mm
SKU: DF-FIT0191 | Brand: DFRobot
A compact aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The ad...
Delivered by Mon 29 Jun
Rocker Switch - SPST (right-angle)
SKU: SF-COM-08837 | Brand: SparkFun
Your project will probably need an on/off switch. If you plan to house the project in an enclosure, we found this great rocker switch to help you out. RoHS and UL approved. Features: Right angle solid through-hole...
Delivered by Wed 8 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
