Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit 1.2 4-Digit 7-Segment Display w/I2C Backpack - Yellow
SKU: AF-1269 | Brand: Adafruit
The Adafruit 1.2" 4-Digit 7-Segment Display with I2C Backpack in yellow makes it easy to add a large, bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2...
Delivered by Wed 15 Jul
ITO (Indium Tin Oxide) Coated Glass - 50mm x 50mm
SKU: AF-1310 | Brand: Adafruit
A 50 × 50 mm glass sheet coated on one side with Indium Tin Oxide (ITO) — a transparent, electrically conductive film. The same material is used in LCD/OLED manufacturing and scientific research. Experiment with creat...
Delivered by Wed 15 Jul
T-Slot Photo Interrupter with 1 Meter Cable
SKU: AF-3985 | Brand: Adafruit
This T-Slot Photo Interrupter with Cable is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR...
Delivered by Wed 15 Jul
Standalone Toggle Capacitive Touch Sensor Breakout [AT42QT1012]
SKU: AF-1375 | Brand: Adafruit
This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...
Delivered by Thu 25 Jun
Adafruit Push-button Power Switch Breakout
SKU: AF-1400 | Brand: Adafruit
The Adafruit Push-button Power Switch Breakout lets you toggle DC power on and off with a simple button press. A latching analogue circuit uses a 3A P-FET to connect or disconnect the input to the output — press once ...
Delivered by Thu 25 Jun
Adafruit 24-Channel 12-bit PWM LED Driver - SPI Interface [TLC5947]
SKU: AF-1429 | Brand: Adafruit
Control 24 channels of 12-bit PWM output with the Adafruit TLC5947 breakout board. Designed for LED control, this SPI-driven board delivers constant-current open-drain outputs that keep brightness consistent even if t...
Delivered by Wed 15 Jul
Maker-Friendly Zipper Case - Red
SKU: AF-3700 | Brand: Adafruit
A candy-coloured zipper case that's the perfect size for makers on the go. Instead of tossing your Raspberry Pi or Metro M0 Express into the abyss of your backpack, keep it safe and organised in this compact pouch. S...
Delivered by Thu 25 Jun
Adafruit PDM MEMS Microphone Breakout
SKU: AF-3492 | Brand: Adafruit
The Adafruit PDM MEMS Microphone Breakout provides a digital audio input using Pulse Density Modulation (PDM) — a common interface in commercial products that's distinct from both analogue and I2S microphones. It's id...
Delivered by Wed 15 Jul
Micro SD Card Extender - 68cm (26 inch) long flex cable
SKU: AF-3688 | Brand: Adafruit
Stop fiddling with SD card sockets in the back of your latest gadget, and streeeeeeeeeetch out with a Micro SD Card Extender . This simple, but effective device gives you a long flexible cable, a psuedo Micro SD ...
Delivered by Wed 15 Jul
Adafruit Itsy Bitsy 32u4 - 3V 8MHz
SKU: AF-3675 | Brand: Adafruit
The Adafruit Itsy Bitsy 32u4 3V packs the power of an Arduino Leonardo into a tiny 1.4" × 0.7" board. Built on the ATmega32u4 with native USB, it's perfect for compact projects that need a full set of GPIO pins withou...
Delivered by Thu 25 Jun
LilyPad Sewable Electronics Kit Guidebook
SKU: SF-BOK-14270 | Brand: SparkFun
The full-color LilyPad Sewable Electronics Kit Guidebook contains step-by-step instructions for creating four interactive projects from the materials contained in the kit. Examples and circuits are provided and exp...
Delivered by Thu 25 Jun
5mm Plastic Bevel LED Holder - Pack of 5
SKU: AF-2174 | Brand: Adafruit
Keep your 5 mm LEDs securely mounted with these lightweight plastic LED holders featuring a bevelled finish. Simply slot the LED through the opening and it snaps into place — no tools or hardware needed. The bevelled ...
Delivered by Thu 25 Jun
Pogo Pins Crown Head (10 pack) [P75-H2]
SKU: AF-2429 | Brand: Adafruit
Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...
Delivered by Thu 25 Jun
Hand-Moldable Plastic - Low Temperature Thermoplastic [100g Bag]
SKU: AF-2504 | Brand: Adafruit
Low-temperature thermoplastic beads (also known as Polymorph, Instamorph, or Friendly Plastic) that become moldable when heated to approximately 60 °C (140 °F). Simply heat in hot water until the beads turn clear and ...
Delivered by Wed 15 Jul
Mini Solderless Breadboard - 4x4 Points
SKU: AF-2463 | Brand: Adafruit
Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 4x4 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to have...
Delivered by Wed 15 Jul
Gravity: Analog Signal Isolator
SKU: DF-DFR0504 | Brand: DFRobot
The Analog Signal Isolator can isolate analog signal and provide isolated power to sensors. It can effectively prevent sensor signal interference and apply to multi-parameter water quality monitoring sensors. Because...
Delivered by Thu 25 Jun
Chip Quik Tack Flux 10cc Syringe with Plunger and Tip [SMD291]
SKU: AF-2667 | Brand: Adafruit
Chip Quik SMD291 tack flux in a convenient 10 cc syringe with plunger and dispensing tip. This synthetic no-clean flux is ideal for all rework, soldering, desoldering, and reflow applications — it stays where you appl...
Delivered by Wed 15 Jul
Concave Button - Green
SKU: SF-COM-09341 | Brand: SparkFun
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel.
Delivered by Thu 25 Jun
Concave Button - Blue
SKU: SF-COM-09337 | Brand: SparkFun
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel.Features: Concave plunger design D...
Delivered by Thu 25 Jun
Concave Button - Red
SKU: SF-COM-09336 | Brand: SparkFun
This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel.Features: Concave plunger design D...
Delivered by Thu 25 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
