Brands and Manufacturers

SKU: AF-2168 | Brand: Adafruit

Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to that s...

SKU: AF-2343 | Brand: Adafruit

These APA102C (DotStar) RGB LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable 24-bit colour control (8 bits each for red, green, and blue). The same smart LED use...

SKU: AF-2476 | Brand: Adafruit

Replacement silicone tubes for the Professional Silicone-Tip Solder Sucker. Cut to your desired length as needed — the elastic, heat-resistant silicone withstands temperatures up to 350°C, letting you get close to you...

SKU: SF-COM-09340 | Brand: SparkFun

This is a 35mm concave momentary push button similar to the ones you find on arcade games. Simple screw in design. Perfect for mashing. This button has a great tactile, ‘clicky’ feel.Features: Concave plunger design D...

SKU: DF-FIT0043 | Brand: DFRobot

The second version of the 9V to Barrel Jack Adapter, now featuring a hard plastic battery snap for easier connection and disconnection. Plug a 9V battery into one end and connect the other to any device with a 5.5 × 2...

SKU: DF-SEN0133 | Brand: DFRobot

This is an Arduino hydrogen gas sensor. It has high sensitivity to Hydrogen (H2) and less sensitivity to alcohol, LPG,cooking fumes . Hydrogen gas is highly flammable and will burn in air at a very wide range...

SKU: DF-DFR0201 | Brand: DFRobot

The Arduino Leonardo is a microcontroller board based on the ATmega32U4, offering the same flash, RAM, and capabilities as the ATmega328 found in the Uno. The key difference is built-in USB communication, allowing the...

SKU: SF-PRT-09139 | Brand: SparkFun

This is a SparkFun exclusive! These are 155mm long jumpers terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be installed next to one another on a 0.1"...

SKU: DF-FIT0225 | Brand: DFRobot

A comprehensive mounting kit containing a variety of M3 nylon and copper standoffs, screws, and nuts — all organised in an adjustable 24-compartment parts box. Everything you need to mount circuit boards, build robot ...

SKU: SF-COM-08862 | Brand: SparkFun

Huge 10mm through-hole LEDs. Mood light an entire wall! Features: 625-630nm Red 2.1-2.3VDC Forward Voltage 80mA Forward Current 30 degree viewing angle 10,000-12,000 MCD output Documents: Datasheet LED Tutorial

SKU: SF-COM-08720 | Brand: SparkFun

A miniature surface-mount momentary pushbutton switch with a low-profile design. Ideal for use as a tactile reset button or general-purpose input on custom PCBs. Rated up to 50 mA. Key Features Surface Mount (SMD) ...

SKU: SF-COM-08636 | Brand: SparkFun

The MCP3002 is a 10-bit analog-to-digital converter (ADC) with a simple SPI interface, available in a breadboard-friendly 8-pin DIP package. Use it to add analog input capability to microcontrollers that lack an ADC, ...

SKU: DF-DFR0208 | Brand: DFRobot

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge 3.7V LiPo battery at a rate of 500mA per hour. It is designed to charge single-cel...

SKU: SF-TOL-12078 | Brand: SparkFun

These needle tipped multimeter probes are great for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Not only can these make a good replacement for any multimeter probes you have now ...

SKU: SF-DEV-14013 | Brand: SparkFun

A pack of five red LilyPad LEDs on a snap-apart strip. Each LED has large sew tabs for stitching into fabric with conductive thread, making them ideal for wearable electronics and e-textile projects. The ultra-thin 0....

SKU: DF-FIT0317 | Brand: DFRobot

This DVI to HDMI converter is a convenient module for those using Embedded boards and testing on old monitors, It can be used just fine with other monitors or graphic cards as well. SPECIFICATIONS DV...

SKU: SF-COM-11899 | Brand: SparkFun

Muscle Wire is a shape memory alloy (Nitinol — nickel-titanium) that contracts when heated or when an electrical current is applied, then returns to its original length when cooled. This property makes it useful as a ...

SKU: SF-COM-00527 | Brand: SparkFun

The LM317TG is a three-terminal adjustable positive voltage regulator with an output range of 1.2V to 37V and up to 1.5A output current. Only two external resistors are needed to set the desired output voltage, making...

SKU: SF-COM-00315 | Brand: SparkFun

The SN754410 is a quad half H-bridge motor driver IC capable of driving DC motors, stepper motors, and other inductive loads. It accepts TTL 5V logic inputs and can drive motors from 4.5V to 36V at up to 1A continuous...

SKU: SF-SEN-00246 | Brand: SparkFun

This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm).