Brands and Manufacturers

SKU: LB-00337 | Brand: Little Bird

Makey Makey by Sandy Ng introduces students to the art of innovation through the Makey Makey kit — a device that turns everyday objects into touchpads that control your computer's keyboard. Through detailed explanatio...

SKU: SF-DEV-14546 | Brand: SparkFun

The LilyPad E-Sewing ProtoSnap is a great way to explore how buttons and switches behave in simple e-sewing circuits before crafting your project. Like other LilyPad ProtoSnap series boards, the individual pieces of t...

SKU: AF-3635 | Brand: Adafruit

A mid-density side-emitting NeoPixel strip with 90 individually addressable RGB LEDs per metre on a flexible black PCB. Unlike standard NeoPixel strips that emit light upward, these side-light LEDs emit at 90 degrees ...

SKU: AF-3634 | Brand: Adafruit

A high-density side-emitting NeoPixel strip with 120 individually addressable RGB LEDs per metre on a flexible black PCB. Unlike standard NeoPixel strips that emit light upward, these side-light LEDs emit at 90 degree...

SKU: MG-TP-OSMO-03 | Brand: Little Bird

A classroom-ready pack of four complete Osmo Genius Kit sets, providing hands-on STEAM learning for up to four students or groups simultaneously. Osmo uses reflective AI technology to bridge physical play with on-scre...

SKU: PL-2802 | Brand: Pololu

The Pololu RC Switch with Small Low-Side MOSFET converts standard hobby RC receiver outputs into simple on/off signals. It measures incoming RC pulse widths against a configurable threshold to control an integrated MO...

SKU: PL-2753 | Brand: Pololu

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, Pi A+, Pi 2, or Pi 3 and provides an easy and low-cost solution for driving a pair of small brushed DC motors....

SKU: AF-2276 | Brand: Adafruit

The 64×32 RGB LED Matrix Panel with 6mm pitch features 2048 bright RGB LEDs in a 384×192mm panel. The widest pixel spacing in the 64×32 range, this panel is designed for viewing from the greatest distance, making it i...

SKU: PL-2675 | Brand: Pololu

This two-part aluminum assembly mounts directly to 1/4 inch diameter motor output shafts like those on our NEMA 23 stepper motors and allows you to drive most scooter, skateboard, inline skate, and other common w...

SKU: AF-2441 | Brand: Adafruit

Is this not the cutest, little display for the Raspberry Pi? It features a 3.5" display with 480x320 16-bit color pixels and a resistive touch overlay just like our popular original, but this one is engineered spec...

SKU: PL-1643 | Brand: Pololu

Sparkfun’s carrier board for the HIH-4030 relative humidity (%RH) sensor from Honeywell outputs an analog voltage that varies nearly linearly with humidity. It operates at 5 V while drawing only 200 μA and ...

SKU: PL-2465 | Brand: Pololu

This small digital distance sensor detects objects between 0.5 cm and 15 cm (0.2″ and 6″) away. With its quick response time, small size, low current draw, and short minimum sensing distance, this sensor is ...

SKU: DF-DFR0167-R | Brand: DFRobot

LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn ...

SKU: PL-2461 | Brand: Pololu

Discontinuation notice: These original (irs05a) versions of our 38 kHz IR proximity sensors have been replaced by newer (irs05b) high-brightness and low-brightness versions. The main changes are the locations o...

SKU: DF-DFR0167-G | Brand: DFRobot

A pack of five green LEDs designed for the LilyPad wearable electronics platform. Each LED is mounted on a thin, sewable PCB with large connecting pads, making it easy to stitch into clothing and e-textile projects wi...

SKU: DF-DWG0001-B | Brand: DFRobot

This is a DFRobot electronic project notebook. We have been using this for a long time and now it has become a necessity for all DFRobot engineers. This notebook represents creativity, attention to details and the sp...

SKU: SF-WRL-09144 | Brand: SparkFun

Itty-bitty U.FL SMD connector. Great for tight PCB layouts that require antenna connections. Documents: Datasheet

SKU: PL-1401 | Brand: Pololu

This miniature single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch or as a small tactile bump sensor for your robot. The switch body dimension is 12.8 x 6.0 ...

SKU: AF-2939 | Brand: Adafruit

A compact 2WD robot rover chassis kit that provides the mechanical foundation for your next robotics project. The kit includes an anodised aluminium chassis, two DC motors in a micro servo form factor, wheels, and a s...

SKU: SF-PRT-07948 | Brand: SparkFun

A through-hole 12mm coin cell battery holder for PCB mounting. Uses friction to hold the battery securely in place — the metal housing is positive (+) and the PCB pad underneath is negative (−). Commonly used for RTC ...