Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Bluefruit LE Friend - Bluetooth Low Energy (BLE 4.0) - nRF51822 [v3.0]
SKU: AF-2267 | Brand: Adafruit
The Bluefruit LE Friend is your new BLE BFF! This USB-to-BLE board makes it easy to get your computer talking to your BLE enabled phone or tablet using a standard serial/UART connection. In it's simplest form, it w...
Delivered by Thu 23 Jul
HCR (Home Care Robot) Mobile Robot Research Platform Kit with Omni Wheels
SKU: DF-ROB0124 | Brand: DFRobot
The HCR (Home Care Robot) is a full-metal open-source mobile robot research platform designed for robotics research and service robot application development. Equipped with three high-torque omni wheels with encoders,...
Delivered by Fri 10 Jul
LED - Basic Green 5mm (25 pack)
SKU: SF-COM-09855 | Brand: SparkFun
A bulk pack of 25 standard green 5 mm through-hole LEDs, supplied in a reusable ESD-safe bag. These are basic, reliable LEDs suitable for indicators, prototyping, and any project that needs visible green light. Speci...
Delivered by Wed 1 Jul
LED - RGB Diffused Common Cathode (25 pack)
SKU: SF-COM-09852 | Brand: SparkFun
We all know that you can never get too many LEDs. Don’t worry, we’ve got you covered. This is a pack of 25 LEDs all conveniently packaged in a nice reusable ESD safe bag. Make that next project shine!
Delivered by Wed 1 Jul
Premium Female/Female Jumper Wires - 40 x 3 (75mm)
SKU: AF-794 | Brand: Adafruit
Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" female heade...
Delivered by Thu 23 Jul
SparkFun OpAmp Breakout - LMV358
SKU: SF-BOB-09816 | Brand: SparkFun
This is a simple 5V Op Amp breakout board, set up as a 2-stage amplifier with a gain of 100 (gain of 10 for each stage). The on-board trim pot sets the signal level between the stages, not the feedback path. The bandw...
Delivered by Fri 10 Jul
HELLA UNTZtrument Add-on Acrylic Tweaker/Hacker Panel
SKU: AF-2013 | Brand: Adafruit
Add knobs to your grid with this add-on accessory for the HELLA UNTZtrument. This is a replacement piece of laser cut acrylic to use when building an Adafruit HELLA UNTZtrument It's perfect for adding a rotary enco...
Delivered by Thu 23 Jul
ACKme WiConnect WiFi Module - Mackerel Evaluation Board
SKU: AF-2022 | Brand: Adafruit
The ACKme WiConnect Mackerel Evaluation Board (AMW004-E03) provides a quick way to evaluate and develop with the WiConnect WiFi platform using the surface-mount AMW004 Wallaby module. Designed by the team behind Rovin...
Delivered by Wed 1 Jul
Wires with Pre-crimped Terminals 50-Piece Rainbow Assortment M-F 6
SKU: PL-1801 | Brand: Pololu
These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0...
Delivered by Wed 1 Jul
5V 2A (2000mA) switching power supply - UL Listed
SKU: AF-276 | Brand: Adafruit
This FCC/CE certified and UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 2A (2,000mA) via a standard 5.5×2.1mm DC barrel jack. It accepts 110–240V AC input and is suitable for power...
Delivered by Thu 23 Jul
Adafruit Triple-Axis Accelerometer - ±2/4/8g @ 14-bit - MMA8451
SKU: AF-2019 | Brand: Adafruit
The Adafruit MMA8451 is a high-precision triple-axis accelerometer with a built-in 14-bit ADC, offering selectable measurement ranges of ±2g, ±4g, and ±8g. Designed by Freescale (now NXP), this sensor detects motion, ...
Delivered by Thu 23 Jul
PowerBoost 1000 Basic - 5V USB Boost @ 1000mA from 1.8V+
SKU: AF-2030 | Brand: Adafruit
PowerBoost is the perfect power supply for your power-hungry portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V...
Delivered by Thu 23 Jul
Yellow 7-segment clock display - 0.56 digit height
SKU: AF-811 | Brand: Adafruit
Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal...
Delivered by Thu 23 Jul
GPIO Header for RaspberryPi A+/B+/Pi 2/Pi 3 [Tall 2x20 Female Header]
SKU: AF-1992 | Brand: Adafruit
Connect your own PCB to a Raspberry Pi B+ with this extra-tall female header. The female header part has extra spaces to make it 16.5mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB ...
Delivered by Thu 23 Jul
Kelvin Clip
SKU: AF-3313 | Brand: Adafruit
Kelvin clips provide accurate measurements right at the contact points of a component or circuit. Each side of the clip is electrically insulated from the other, so when you grip a component the two jaw contacts make ...
Delivered by Thu 23 Jul
USB 32-Bit Whacker - PIC32MX795 Development Board
SKU: SF-DEV-09713 | Brand: SparkFun
The new version of the UBW32 now uses the PIC32MX795 IC. Based on the work of Brian Schmalz, the UBW32 is a small development board for the new PIC32MX795 32-bit CPU from Microchip. The UBW32 is breadboard frien...
Delivered by Fri 10 Jul
URM04 Ultrasonic Sensor (RS485)
SKU: DF-SEN0002 | Brand: DFRobot
The URM04 Ultrasonic sensor is developed based upon our popular URM37 ultrasonic sensor, it is using RS485 interface which allows multiple sensors to be used simultaneously . The RS485 interface allows a number of...
Delivered by Wed 1 Jul
3D Gesture Sensor (Mini) For Arduino
SKU: DF-SEN0202 | Brand: DFRobot
The DFRobot 3D Gesture Sensor (Mini) integrates 3D gesture recognition and motion tracking using Microchip's patented GestIC near-field sensing technology. It can detect clockwise and counterclockwise rotation, direct...
Delivered by Fri 10 Jul
Gravity: 9 Pcs Sensor Set for Arduino
SKU: DF-DFR0018 | Brand: DFRobot
This is DFRobot's basic sensor set for arduino. Set includes light sensor, touch sensor, temperature sensor, magnetic sensor, vibration sensor, tilt sensor, big button, LED lighting module and Grayscale sensor. ...
Delivered by Fri 10 Jul
Optical Dust Sensor - GP2Y1010AU0F
SKU: SF-COM-09689 | Brand: SparkFun
Sharp’s GP2Y1010AU0F is an optical air quality sensor, designed to sense dust particles. An infrared emitting diode and a phototransistor are diagonally arranged into this device, to allow it to detect the reflecte...
Delivered by Fri 10 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
