Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
SparkFun LiPo Charger Basic - Micro-USB
SKU: SF-PRT-10217 | Brand: SparkFun
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The SparkFun LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells ...
Delivered by Thu 2 Jul
Micro Metal Gear Motor with Connector (30:1)
SKU: DF-FIT0467 | Brand: DFRobot
INTRODUCTION This motor has a long (0.365"/9.27 mm) D profile metal output shaft that matches the 42x19mm and 32x7mm dimensions of the Pololu wheel. The brass faceplate has two mounting h...
Delivered by Mon 13 Jul
PowerBoost 500 Basic - 5V USB Boost @ 500mA from 1.8V+
SKU: AF-1903 | Brand: Adafruit
The PowerBoost 500 Basic is a compact DC/DC boost converter that takes input from 1.8V or higher and outputs a steady 5.2V — perfect for powering portable 5V projects from batteries. The slightly elevated 5.2V output ...
Delivered by Fri 24 Jul
SparkFun Solder-able Breadboard - Large
SKU: SF-PRT-12699 | Brand: SparkFun
This is the Large SparkFun Solder-able Breadboard. A bare PCB that is the exact size as our full-size breadboard with the same connections to pins and power rails. This board is especially useful for preserving a prot...
Delivered by Mon 13 Jul
PaPiRus 2.7 eInk Display HAT for Raspberry Pi from Pi Supply
SKU: AF-3420 | Brand: Adafruit
The PaPiRus Screen HAT from Pi Supply is an ePaper / eInk screen HAT designed for the Raspberry Pi. Think of it as the older sibling of the PaPiRus Zero.ePaper / eInk is a display technology that mimics the appearance...
Delivered by Thu 2 Jul
Gravity: 130 DC Motor Module
SKU: DF-DFR0411 | Brand: DFRobot
INTRODUCTION This DC motor has an integrated transistor built in to the board, eliminating the need for a motor driver. Use PWM to control it for all your DIY project needs. It uses the 3 pi...
Delivered by Mon 13 Jul
Reset / Enable Controller - KA75330 3.3V Voltage Detector
SKU: AF-3428 | Brand: Adafruit
A voltage detector is handy for projects where you want to make sure your microcontroller doesn't run at a low voltage. For example, say you have a Feather Huzzah running on a lipoly battery every few minutes. Even...
Delivered by Fri 24 Jul
Panel Mount USB to 4-pin Female Header Cable - 6'
SKU: SF-CAB-10177 | Brand: SparkFun
You might have seen these cables used in computers. They are typically used to bring USB connections from a motherboard to the external case, or the rear expansion slots. They have a 0.1" spaced 4-pin header on one en...
Delivered by Mon 13 Jul
Universal Qi Wireless Receiver Module
SKU: AF-1901 | Brand: Adafruit
A Qi-compatible wireless charging receiver module that outputs regulated 5 V at up to 500 mA. Place this module on any standard Qi charging base to receive power wirelessly — ideal for adding wireless recharging capab...
Delivered by Fri 24 Jul
RFID Tag - ABS Token MIFARE Classic® 1K (13.56 MHz)
SKU: SF-SEN-10127 | Brand: SparkFun
This is a basic RFID tag that functions within the MIFARE Classic® 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and w...
Delivered by Mon 13 Jul
Mini 3-wire Volt Meter (0 - 99.9VDC)
SKU: AF-705 | Brand: Adafruit
A compact 3-wire voltage meter with a vivid green 3-digit 7-segment display. Reads 0–99.9VDC with 0.1V precision, making it perfect for monitoring battery levels, power supplies, and electronic projects. Mounting tabs...
Delivered by Thu 2 Jul
SparkFun Transceiver Breakout - RS-485
SKU: SF-BOB-10124 | Brand: SparkFun
This is a breakout board for the SP3485 RS-485 transceiver IC, which will convert a UART serial stream to RS-485. The SP3485 is a half-duplex transceiver, so it can only communicate one way at a time, but it can re...
Delivered by Thu 2 Jul
Stacking Header Set for Beagle Bone Capes (2x23)
SKU: AF-706 | Brand: Adafruit
These extra-long stacking headers are designed for BeagleBone Capes, allowing you to stack multiple capes on a single BeagleBone for modular, expandable designs. They work just like standard 2×23 0.1"-spaced female he...
Delivered by Fri 24 Jul
Analog UV Light Sensor Breakout - GUVA-S12SD
SKU: AF-1918 | Brand: Adafruit
An analog UV light sensor breakout based on the GUVA-S12SD photodiode, detecting the 240–370nm range covering UVB and most of the UVA spectrum. An on-board op-amp amplifies the tiny photodiode current to a readable vo...
Delivered by Fri 24 Jul
Channel Mount Gearbox Kit - Continuous Rotation (7:1 Ratio)
SKU: SF-ROB-12608 | Brand: SparkFun
These continuous rotation 7:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to ...
Delivered by Thu 2 Jul
Channel Mount Gearbox Kit - Continuous Rotation (5:1 Ratio)
SKU: SF-ROB-12607 | Brand: SparkFun
These continuous rotation 5:1 gear ratio channel gearbox kits incorporate threaded side mounts to easily attach a standard size servo to numerous Actobotics products including tubing and channel; making it easy to ...
Delivered by Thu 2 Jul
Music Maker FeatherWing w/ Amp - MP3 OGG WAV MIDI Synth Player [Stereo 3W Amplifier]
SKU: AF-3436 | Brand: Adafruit
The Adafruit Music Maker FeatherWing with Amplifier brings powerful audio playback to any Feather board. Built around the VS1053B codec chip, it decodes a wide variety of formats including MP3, AAC, Ogg Vorbis, WMA, M...
Delivered by Fri 24 Jul
OBD-II to DB9 Cable
SKU: SF-CAB-10087 | Brand: SparkFun
The OBD-II to DB9 Cable connects your vehicle's OBD-II diagnostic port to a DB9 female serial connector, providing access to automotive bus protocols for diagnostics, data logging, and vehicle hacking projects. The c...
Delivered by Mon 13 Jul
Gravity: Starter Kit for Arduino
SKU: DF-KIT0111 | Brand: DFRobot
The Gravity Starter Kit for Arduino is a plug-and-play electronics toolkit designed for beginners and makers getting started with the Arduino platform. It includes a DFRduino UNO R3 microcontroller (fully compatible w...
Delivered by Thu 2 Jul
40-pin TFT Friend - FPC Breakout with LED Backlight Driver
SKU: AF-1932 | Brand: Adafruit
A labelled breakout board for 40-pin dot-clock TFT displays with an integrated LED backlight driver. Breaks out all 40 FPC pins to breadboard-friendly through-hole pads and includes a FAN5333-based boost converter for...
Delivered by Fri 24 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
