Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Raspberry Pi Sense HAT [For the Pi 3 / 2 / B+ / A+]
SKU: AF-2738 | Brand: Adafruit
Control the same hardware as used in space...build your very own Astro Pi with the new Raspberry Pi Sense HAT! The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins to create an ‘As...
Delivered by Fri 24 Jul
Monocle Magnifier - Illuminated
SKU: SF-TOL-09316 | Brand: SparkFun
When working with small parts, sometimes you need magnification and some extra light. This is a monocle we use regularly in our production facility. It has a 10x lens with a working distance of about 1-½". The 1" diam...
Delivered by Thu 2 Jul
Photo Interrupter - GP1A57HRJ00F
SKU: SF-SEN-09299 | Brand: SparkFun
The GP1A57HRJ00F is a slotted optical sensor (photo interrupter) with an infrared emitter on one upright and a shielded infrared detector on the other. When an object passes through the 10 mm gap between the uprights,...
Delivered by Thu 2 Jul
Mini HDMI Cable - 3ft
SKU: SF-CAB-14274 | Brand: SparkFun
This is an inexpensive 3-foot-long HDMI to Mini HDMI cable that you can use to hook up your Raspberry Pi Zero W to a suitable monitor or TV. Heck, you can hook up anything you want with it! Mini HDMI is not that commo...
Delivered by Mon 13 Jul
Arduino Stackable Header - 6-pin
SKU: SF-PRT-09280 | Brand: SparkFun
This is a 6-pin female header, with extra long legs – great for stacking Arduino shields. Pins are spaced by 0.1". Documents: Datasheet
Delivered by Thu 2 Jul
Adafruit Bluefruit LE Shield - Bluetooth LE for Arduino
SKU: AF-2746 | Brand: Adafruit
The Adafruit Bluefruit LE Shield adds Bluetooth Low Energy connectivity to your Arduino in a plug-in shield form factor. Solder the included headers, stack it on your Arduino, and start communicating wirelessly with i...
Delivered by Thu 2 Jul
SWD (2x5 1.27mm) Cable Breakout Board
SKU: AF-2743 | Brand: Adafruit
This compact adapter board makes it easier to work with ARM development boards that use the slimmer 2x5 SWD programming connector. It is designed for 0.05 inch / 1.27mm pitch SWD cables, commonly found on small Cortex...
Delivered by Thu 2 Jul
ProtoBoard - Rectangle 2 Double Sided
SKU: DF-FIT0203 | Brand: DFRobot
This is a very basic double sided prototyping board with standard 0.1" spacing through holes and four 3mm diameter mounting holes. There are 22x26 holes in total. Great for quickly prototyping stackable circuit...
Delivered by Mon 13 Jul
Piezo Vibration Sensor - Small Horizontal
SKU: SF-SEN-09198 | Brand: SparkFun
The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and ‘tap’ inputs from a user....
Delivered by Mon 13 Jul
Piezo Vibration Sensor - Large with Mass
SKU: SF-SEN-09197 | Brand: SparkFun
A flexible piezo vibration sensor from Measurement Specialties, commonly used for detecting flex, touch, vibration, and shock. The PVDF polymer film generates a small AC voltage (up to ±90 V) when it moves, which can ...
Delivered by Mon 13 Jul
Jumper Wires Premium 6 Mixed Pack of 100
SKU: SF-PRT-09194 | Brand: SparkFun
A mixed pack of 100 premium jumper wires in assorted colours, ideal for breadboard prototyping and connecting to 0.1″ headers. The pack includes 50 male-to-male and 50 female-to-female wires, each 155 mm (6″) long. T...
Delivered by Thu 2 Jul
Pogo Pin w/ Round Tip
SKU: SF-PRT-09173 | Brand: SparkFun
These spring-loaded pogo pins with round tips are ideal for programming jigs, test fixtures, and temporary connections where you don't want to solder permanent headers. The pins fit snugly into standard perfboard hole...
Delivered by Mon 13 Jul
Gravity: Arduino Carbon Monoxide Sensor (MQ7)
SKU: DF-SEN0132 | Brand: DFRobot
INTRODUCTION This is an Arduino Carbon Monoxide Sensor. It uses MQ7 probe to detect Carbon Monoxide (CO) concentrations in the air from 20 to 2000ppm. The sensitivity ca...
Delivered by Mon 13 Jul
900MHz Duck Antenna RP-SMA
SKU: SF-WRL-09143 | Brand: SparkFun
A 900/1800MHz dual-band duck antenna with 2dBi gain and an RP-SMA connector. Well suited for XBee 900MHz modules and other 900MHz radio applications. 50-ohm impedance, 105mm long. Specifications Frequency – 900/180...
Delivered by Thu 2 Jul
Microswitch-5A/250V (especially for Ultimaker 3D printer)
SKU: DF-FIT0213 | Brand: DFRobot
This is a very sensitive and stable lever switch which is commomly used in industrial automation projects. But in your DIY projetcs or robots, this is also great for detecting objects. It can be used as a bumper sens...
Delivered by Thu 2 Jul
Jumper Wire - 0.1(housing pin not included)
SKU: DF-FIT0215 | Brand: DFRobot
A 300 mm (12") ribbon cable made of ten colour-coded jumper wires, each with female headers already attached at both ends. The wires can easily be pulled apart for individual use, making them versatile for breadboard ...
Delivered by Mon 13 Jul
Interface Cable SMA to U.FL
SKU: DF-FIT0219 | Brand: DFRobot
The Interface Cable SMA to U.FL is a connector cable that interfaces U.FL RF connectors to regular SMA connections. APPLICATIONS Connect Standard SMA Connector for SIM 908 GPS/GPRS/GSM Shield For Ardui...
Delivered by Mon 13 Jul
SparkFun Thumb Joystick Breakout
SKU: SF-BOB-09110 | Brand: SparkFun
This is the breakout board for the thumb joystick. Pins are broken out to a 0.1" header and includes 4 mounting holes in the corners.
Delivered by Thu 2 Jul
Monochrome 2.42 128x64 OLED Graphic Display Module Kit
SKU: AF-2719 | Brand: Adafruit
If you've been diggin' our monochrome OLEDs but need something bigger, this display will delight you! These displays are 2.42" diagonal, and very readable due to the high contrast of an OLED display. This display i...
Delivered by Fri 24 Jul
Amphenol FCI Clincher Connector (3 Position, Female)
SKU: SF-COM-14196 | Brand: SparkFun
The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed...
Delivered by Thu 2 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
