Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit Micro-Lipo Charger for LiPoly Batt with USB Type C Jack
SKU: AF-4410 | Brand: Adafruit
The Adafruit Micro-Lipo Charger is a tiny, easy-to-use charger for single-cell 3.7V/4.2V lithium polymer and lithium ion rechargeable batteries. Simply plug a USB-C cable into any USB power source and connect your bat...
Delivered by Thu 18 Jun
Panel Mount USB Micro-B Extension Cable - 6
SKU: SF-CAB-15464 | Brand: SparkFun
This panel mount USB micro-B extension cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm ...
Delivered by Mon 29 Jun
Lithium Ion Polymer Battery with Short Cable - 3.7V 350mAh
SKU: AF-4237 | Brand: Adafruit
A compact 3.7 V 350 mAh lithium-ion polymer (LiPo) battery with a short cable and genuine 2-pin JST-PH connector. The slim, lightweight form factor makes it ideal for wearables, IoT devices, and portable electronics p...
Delivered by Wed 8 Jul
Hall-Effect Sensor - AH1815 (Non-Latching)
SKU: SF-SEN-14709 | Brand: SparkFun
The AH1815 is an integrated Hall-Effect non-latched sensor. That’s nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sen...
Delivered by Thu 18 Jun
Adafruit 16-Channel PWM / Servo Bonnet for Raspberry Pi
SKU: AF-3416 | Brand: Adafruit
The Adafruit 16-Channel PWM/Servo Bonnet adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution ...
Delivered by Thu 18 Jun
Massive Arcade Button with LED - 100mm White
SKU: AF-1187 | Brand: Adafruit
OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, howe...
Delivered by Thu 18 Jun
Adafruit Perma-Proto Half-sized Breadboard PCB - Single
SKU: AF-1609 | Brand: Adafruit
The Adafruit Perma-Proto Half-Sized Breadboard PCB mirrors the layout of a standard half-size solderless breadboard, making it simple to transfer prototyped circuits to a permanent soldered board. With 30 rows of 5-ho...
Delivered by Wed 8 Jul
Adafruit NeoPixel Ring - RGB LED w/ Integrated Drivers - 16 pixel
SKU: AF-1463 | Brand: Adafruit
Round and round they go! 16 ultra-bright smart RGB NeoPixels are arranged in a circle with a 44.5 mm (1.75″) outer diameter. Each LED is individually addressable from a single microcontroller pin, delivering 24-bit co...
Delivered by Thu 18 Jun
Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM
SKU: AF-2310 | Brand: Adafruit
The Adafruit Perma-Proto HAT for Pi Mini Kit is a full-sized prototyping daughter board for any Raspberry Pi with a 2×20 GPIO header (Pi Zero, A+, B+, Pi 2, 3, 4, 5). It provides a grid of 0.1″ soldering holes connect...
Delivered by Thu 18 Jun
IR Break Beam Sensor - 3mm LEDs
SKU: AF-2167 | Brand: Adafruit
Infrared (IR) break-beam sensors are a simple way to detect motion. They work by having an emitter side that sends out a beam of human-invisible IR light, then a receiver across the way which is sensitive to tha...
Delivered by Wed 8 Jul
Gravity:DIGITAL IR Transmitter Module
SKU: DF-DFR0095 | Brand: DFRobot
An infrared transmitter is simply a Light Emitting Diode which generates IR light (invisible IR light)--light with a wavelength of between 1 mm and 750 nanometers, and some associated circuitry. In an infrared ...
Delivered by Thu 18 Jun
Aluminum Heat Sink for Raspberry Pi 3 - 15 x 15 x 15mm
SKU: AF-3082 | Brand: Adafruit
A tall-profile aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. The taller 15mm height provides greater surface area for improved heat ...
Delivered by Wed 8 Jul
Tactile Button switch (6mm) x 20 pack
SKU: AF-367 | Brand: Adafruit
Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial. The pins are normally open (disconnected) a...
Delivered by Thu 18 Jun
Large push-pull solenoid
SKU: AF-413 | Brand: Adafruit
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This mak...
Delivered by Wed 8 Jul
Tactile Button Assortment
SKU: SF-COM-10302 | Brand: SparkFun
These tactile buttons are great for all sorts of projects. This assortment comes with 2 of each of 6 different colors for a total of 12 buttons. The colored caps are removable and the buttons fit into breadboards. ...
Delivered by Thu 18 Jun
Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates [Version 3]
SKU: AF-746 | Brand: Adafruit
The Adafruit Ultimate GPS Breakout (Version 3) is a high-performance GPS module built around the MTK3339 chipset. With 66 channels, -165 dBm tracking sensitivity, and up to 10 Hz position updates, it delivers accurate...
Delivered by Thu 18 Jun
Gravity: MOSFET Power Controller
SKU: DF-DFR0457 | Brand: DFRobot
In most Arduino projects, relays are the first choice to drive some large current device. It requires a certain amount of current to drive the internal coil to pick-up contact. But for some MCU, like Intel Edison,...
Delivered by Mon 29 Jun
4xAA battery holder (square with cover)
SKU: DF-FIT0080 | Brand: DFRobot
A 4-cell AA battery holder in a square (2×2) configuration with a sliding removable cover and a built-in ON/OFF switch. Features 5-inch tinned leads for easy soldering. The cover keeps batteries secure, and the switch...
Delivered by Thu 18 Jun
JST-PH 2-pin Jumper Cable - 100mm long
SKU: AF-4714 | Brand: Adafruit
We use 2 pin JST PH connectors for all our battery packs, and if you want to put a board in series, like our LC709203F Stemma QT battery gauge, this cable will be very handy! Both ends have a JST PH 2mm pitch 2-pin...
Delivered by Thu 18 Jun
Robot Chassis with 2 wheels
SKU: LB-LR18 | Brand: Little Bird
Looking for a Robot Chassis? Check out our 2 Wheel Robot Chassis in Blue. Perfect for adding your own electronics to. It comes with two motors which can be connected to your Arduino, Micro:Bit or...
Delivered by Thu 2 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
