Brands and Manufacturers
Browse our full range of electronics brands and manufacturers, all available with Australian shipping. From development boards and displays to relay modules, LED matrices, and connector hardware, you'll find trusted names across every category.
Whether you're a hobbyist building your next project, an educator setting up a STEM lab, or a professional prototyping a new product, shopping by brand makes it easy to find compatible parts from the manufacturers you rely on.
Adafruit Qwiic / Stemma QT Breakout Board
SKU: AF-5961 | Brand: Adafruit
The Adafruit Qwiic / STEMMA QT Breakout Board bridges the gap between the STEMMA QT / Qwiic connector world and standard 0.1" breadboard pins. One end has a JST SH-compatible connector for plug-and-play I2C, and the o...
Delivered by Wed 8 Jul
Adafruit CH552 QT Py - 8051 Dev Board with STEMMA QT
SKU: AF-5960 | Brand: Adafruit
The Adafruit CH552 QT Py is a compact development board built around the WCH CH552, an enhanced 8-bit 8051 microcontroller. Running at 16 MHz with native USB device support, it packs a surprising amount of functionali...
Delivered by Wed 8 Jul
Adafruit LTC4316 I2C Address Translator
SKU: AF-5914 | Brand: Adafruit
The Adafruit LTC4316 I2C Address Translator solves one of I2C's most frustrating limitations: address conflicts. When two devices share the same fixed I2C address, this chip performs on-the-fly address translation — d...
Delivered by Wed 8 Jul
Adafruit NeoDriver - I2C to NeoPixel Driver Board - Stemma QT
SKU: AF-5766 | Brand: Adafruit
The Adafruit NeoDriver converts I2C commands into NeoPixel (WS2812/SK6812) timing signals, letting you control addressable LED strips from any board with an I2C bus — even platforms that lack native NeoPixel support. ...
Delivered by Wed 8 Jul
AGS02MA I2C TVOC Gas Sensor
SKU: AF-5593 | Brand: Adafruit
The AGS02MA is a compact MOX-based TVOC (Total Volatile Organic Compounds) gas sensor with an I2C interface. It features a built-in ADC that outputs gas resistance and parts-per-billion (ppb) readings — higher ppb val...
Delivered by Wed 8 Jul
Adafruit ATtiny816 Breakout with seesaw - STEMMA QT / Qwiic
SKU: AF-5681 | Brand: Adafruit
The Adafruit ATtiny816 Breakout with seesaw is a compact development board that combines an ATtiny816 microcontroller with the Adafruit seesaw I2C framework and STEMMA QT connectivity. Pre-programmed with seesaw firmw...
Delivered by Wed 8 Jul
Adafruit LTR-329 Light Sensor - STEMMA QT / Qwiic
SKU: AF-5591 | Brand: Adafruit
The Adafruit LTR-329 is a low-cost I2C digital light sensor that provides 16-bit measurements for both infrared and visible+IR spectrums. Subtract one from the other to get human-visible light readings. With configura...
Delivered by Wed 8 Jul
Assembled Adafruit 0.56" 4-Digit 7-Segment Display
SKU: AF-5599 | Brand: Adafruit
What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs...
Delivered by Wed 8 Jul
Adafruit QT Py ESP32 Pico - WiFi Dev Board with STEMMA QT
SKU: AF-5395 | Brand: Adafruit
The Adafruit QT Py ESP32 Pico brings the full power of the classic ESP32 into the tiny QT Py form factor. Built around the ESP32-PICO-V3-02 — an all-in-one module with dual-core 240 MHz Tensilica processor, Wi-Fi, Blu...
Delivered by Wed 8 Jul
Adafruit QT Py ESP32-S3 WiFi Dev Board with STEMMA QT
SKU: AF-5426 | Brand: Adafruit
The Adafruit QT Py ESP32-S3 packs dual-core 240 MHz processing, Wi-Fi, Bluetooth LE, and native USB into the tiny QT Py form factor. With 8 MB flash and 512 KB SRAM, it's a significant step up from the ESP32-S2 — addi...
Delivered by Wed 8 Jul
Adafruit ESP32 Feather V2 w.FL Antenna - 8MB Flash + 2 MB PSRAM
SKU: AF-5438 | Brand: Adafruit
The Adafruit ESP32 Feather V2 with w.FL Antenna is identical to the standard ESP32 Feather V2 but replaces the PCB trace antenna with a w.FL (MHF3/IPEX3) connector for attaching an external antenna. This makes it idea...
Delivered by Wed 8 Jul
Maker Pi RP2040 - Motor and Robot Controller
SKU: AF-5129 | Brand: Adafruit
Cytron's Maker Pi RP2040 features the new Raspberry Pi RP2040 chip embedded on a robot controller board. The board comes with a dual-channel DC motor driver, 4 servo motor ports, and 7 Grove I/O connectors. Now you ca...
Delivered by Wed 8 Jul
JST-SH 4-pin Cable with Micro SMT Test Hooks
SKU: AF-5037 | Brand: Adafruit
This cable will make it super easy to use our plug-and-play STEMMA QT boards and controllers with chips, breakouts, and other devices that are I2C compatible but don't come with a STEMMA QT socket already on 'em.On on...
Delivered by Wed 8 Jul
JST PH 2mm 3-pin Horizontal Connector (10-pack)
SKU: AF-4391 | Brand: Adafruit
Designing boards with plug-n-play connectivity is a snap, with STEMMA connectors. Here's a pack of 10 of our favorite 2mm pitch connector - the JST PH 3 pin. These are the horizontal style.You can use these with any o...
Delivered by Wed 8 Jul
Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier
SKU: AF-5165 | Brand: Adafruit
The Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier handles all the analogue complexity of thermocouple measurement over a simple I2C interface. Connect your thermocouple, wire up I2C (or use the solderless STE...
Delivered by Wed 8 Jul
Adafruit HTS221 - Temperature & Humidity Sensor Breakout Board
SKU: AF-4535 | Brand: Adafruit
The Adafruit HTS221 is an affordable I²C/SPI temperature and humidity sensor breakout board from ST. It measures relative humidity from 0–100% RH with 3.5% accuracy (in the 20–80% range) and temperature from -40 to 12...
Delivered by Wed 8 Jul
Adafruit 24LC32 I2C EEPROM Breakout - 32Kbit / 4 KB - Stemma QT
SKU: AF-5146 | Brand: Adafruit
The Adafruit 24LC32 I2C EEPROM Breakout provides 32 Kbit (4 KB) of reliable, non-volatile storage over a simple I2C interface. Store calibration values, MAC addresses, access tokens, or any data that needs to persist ...
Delivered by Wed 8 Jul
Adafruit ESP32-S2 Feather - 2 MB PSRAM and STEMMA QT / Qwiic
SKU: AF-5000 | Brand: Adafruit
The Adafruit ESP32-S2 Feather brings Espressif's single-core ESP32-S2 to the Feather ecosystem with native USB, 2.4 GHz Wi-Fi, 4 MB flash, and 2 MB PSRAM. Native USB support means it can act as a keyboard, mouse, MIDI...
Delivered by Wed 8 Jul
Adafruit CharliePlex LED Matrix Bonnet - 8x16 Blue LEDs
SKU: AF-3467 | Brand: Adafruit
The Adafruit CharliePlex LED Matrix Bonnet features a 16×8 grid of blue LEDs driven by the IS31FL3731 charlieplex driver over I2C. Simply plug it onto any Raspberry Pi with a 2×20 header for a bright, programmable 128...
Delivered by Wed 8 Jul
Adafruit Feather nRF52 Pro with myNewt Bootloader
SKU: AF-3574 | Brand: Adafruit
The Feather nRF52 Pro is an advanced Bluetooth Low Energy development board built around the Nordic nRF52832, designed specifically for use with the Apache Mynewt RTOS. It features a fully open-source BLE 5.0 stack, a...
Delivered by Wed 8 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
