Brands and Manufacturers

SKU: PI-PIM720 | Brand: Pimoroni

An electronic adventure playground for physical computing, built around the RP2350 chip. Includes a 2.8" LCD screen, a speaker, a mini breadboard, and much more!Our Explorer lets you play with circuits, build science ...

SKU: PI-PIM715 | Brand: Pimoroni

An expanded 2.8" (320 x 240 pixel) IPS LCD display add on for Raspberry Pi Pico / Pico W, with four buttons, an RGB LED and Qw/ST connectivity.Pico Display 2.8" features a bold, credit-card sized 320 x 240 pixel LCD d...

SKU: SB-PICOWIFIHAT | Brand: Little Bird

Raspberry Pi Pico WiFi HAT is a compact and easy-to-use WiFi HAT for the Raspberry Pi Pico that includes an ESP8266 module, IEEE 802.11b/g/n WiFi Standard, 3.3 V Operating Voltage, UART Communication interface, and a...

SKU: SF-DEV-17364 | Brand: SparkFun

The Raspberry Pi Compute Module 4 represents a huge change for the Compute Module line. The biggest change being the move from the DDR2 SODIMM connector form factor to a high density connector on the bottom of the boa...

SKU: SF-DEV-17390 | Brand: SparkFun

  The Raspberry Pi Compute Module 4 represents a huge change for the Compute Module line. The biggest change being the move from the DDR2 SODIMM connector form factor to a high density connector on the bottom of ...

SKU: SF-DEV-17391 | Brand: SparkFun

The Raspberry Pi Compute Module 4 represents a huge change for the Compute Module line. The biggest change being the move from the DDR2 SODIMM connector form factor to a high density connector on the bottom of the boa...

SKU: SB-21468 | Brand: Little Bird

Pico Driver Motor HAT is a DC motor control module that is powered by one H-bridge IC L293D with the motor input supply range 6 V-12 V. It is designed to connect 2 DC motors simultaneously or 1 stepper motor that wou...

SKU: KI-5641 | Brand: Kitronik

Take your micro:bit robotics builds to the next level with the Kitronik All-in-one Robotics Board. This all-in-one control solution lets the BBC micro:bit drive up to 4 motors (or 2 stepper motors) and 8 servos, makin...

SKU: PL-2482 | Brand: Pololu

The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB with a soldered-in 1...

SKU: PL-2462 | Brand: Pololu

The Vishay TSSP58038 is a modulated IR receiver that is designed specifically for sensing applications instead of data communication for remote control. Unlike most similar-looking units, it has a fixed gain that mak...

SKU: PR-PIM095 | Brand: Little Bird

The Piano HAT adds a full-octave capacitive touch piano to your Raspberry Pi. With 13 touch-sensitive keys, octave controls, and bright LED feedback, it turns your Pi into a compact musical instrument you can program ...

SKU: RP-CM4102016 | Brand: Raspberry Pi Ltd

COMPUTE MODULE 4 is built on the 64-bit quad-core BCM2711 application processor. The Compute Module 4 delivers a step change in performance over its predecessors such as faster CPU cores, better multimedia and more in...

SKU: LB-LS4690-50CM | Brand: Little Bird

A waterproof DS18B20 digital temperature probe with a 0.5m cable and XH2.54mm connector. Ideal for monitoring temperatures in wet or harsh environments including aquariums, hydroponics, brewing, and outdoor weather st...

SKU: SF-DEV-17512 | Brand: SparkFun

The SparkFun Qwiic pHAT Extension for Raspberry Pi 400 provides access to the Pi 400's GPIO header while adding Qwiic I2C connectivity. The board connects via a 2×20 right-angle header and extends out to the edge of t...

SKU: DF-KIT0157 | Brand: DFRobot

The Maixduino AI Development Kit combines the Kendryte K210 RISC-V dual-core AI processor with an ESP32 module for Wi-Fi and Bluetooth connectivity, all in an Arduino UNO-compatible form factor. The K210 features a bu...

SKU: KI-5609 | Brand: Kitronik

The Kitronik Prototyping System for the BBC micro:bit provides a ready-made platform for building circuits and experimenting with external components — no soldering required. It combines a pre-built edge connector bre...

SKU: AF-5957 | Brand: Adafruit

The Adafruit DVI Sock is a compact DVI/HDMI output board designed to solder directly onto the end of a Raspberry Pi Pico or Pico W like a little PCB sock. Using the RP2040's PIO system, it enables your Pico to drive a...

SKU: SB-21819 | Brand: Little Bird

The Pico Air Monitoring Expansion is a HAT for Raspberry Pi Pico that measures suspended particulate matter (PM1.0, PM2.5, and PM10) in the air. It uses a PMSA003 digital laser dust sensor and includes an onboard 0.91...

SKU: SF-WRL-17743 | Brand: SparkFun

The SparkFun Thing Plus ESP32-S2 WROOM is a Feather form-factor development board built around Espressif's ESP32-S2 SoC with integrated 2.4 GHz Wi-Fi. It features enhanced security over the original ESP32, including t...

SKU: EC-SPM01021S | Brand: Elecrow

This water sensor works by having a series of exposed traces connected to ground and interlaced between the grounded traces are the sens traces. The sensor board has a demension of 5.0 x 4.0cm. There is also a on-boar...