Brands and Manufacturers

SKU: SF-DEV-13912 | Brand: SparkFun

The Spectacle Director Board controls all the actions in a Spectacle project. Though the Director Board doesn’t do too much on its own, it is what communicates directly with SparkFun’s Spectacle programmer and is the ...

SKU: PL-1268 | Brand: Pololu

The Pololu MinIMU-9 v2 is a compact (0.8″ × 0.5″) board that combines ST’s L3GD20 3-axis gyroscope and LSM303DLHC 3-axis accelerometer and 3-axis magnetometer to form an inertial measurement unit (IMU); we therefore r...

SKU: PL-1265 | Brand: Pololu

This board has been replaced by the newer MinIMU-9 v2 L3GD20 and LSM303DLHC carrier, which offers improved magnetic sensing resolution, a wider acceleration measurement range, and gyro measurements that are more resis...

SKU: SF-LCD-00570 | Brand: SparkFun

This is the itty-bitty connector for the Nokia color LCD. 10-Pins. Surface mount. Hard to find. 0.5mm pitch so be careful. Can it be soldered by hand? Yes! Owen managed to solder wire wrap wire to the individual legs ...

SKU: SF-SEN-11859 | Brand: SparkFun

This is not your typical temperature sensor. The TMP006 Breakout can measure the temperature of an object without making contact with it. By using a thermopile to detect and absorb the infrared energy an object is emi...

SKU: PL-1245 | Brand: Pololu

The Satellite Module 003 is an RGB LED round “pixel” with three bright surface-mount RGB LEDs. This LED module is designed to be used with the OctoBrite DEFILIPPI to easily integrate full-color LED lighting into your...

SKU: PL-1239 | Brand: Pololu

A 300mm (12") six-conductor female-to-female cable designed for chaining ShiftBrite and ShiftBar LED modules. The cable wires are colour-coded to match the ShiftBrite pinout, with black for ground and red for power. ...

SKU: SF-DEV-11814 | Brand: SparkFun

The µUSB-PA5 is a compact USB-to-Serial TTL UART bridge based on the FTDI FT232RQ. It connects to your PC via a Mini-B USB connector and provides serial communication at baud rates up to 3 Mbps — designed primarily fo...

SKU: SF-KIT-13863 | Brand: SparkFun

The SparkFun PicoBoard Starter Kit is your go-to source to begin learning everything about the SparkFun PicoBoard and the Scratch programming environment. This kit includes your very own PicoBoard, multiple pieces ...

SKU: DF-SEN0164 | Brand: DFRobot

This adjustable infrared sensor features a high-sensitivity photoreflector to perform distance detection function,ranging from 3cm to 50cm. When the infrared light emitted by the emitter gets reflected on a surface...

SKU: SF-BOB-00496 | Brand: SparkFun

The SparkFun SOIC to DIP Adapter converts 28-pin SOIC surface-mount packages to standard 0.1" through-hole headers, making it easy to prototype with SMD ICs on breadboards or in DIP sockets. Key Features 28-Pin SOI...

SKU: SF-SEN-11769 | Brand: SparkFun

The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measurin...

SKU: SF-SEN-00251 | Brand: SparkFun

36" high temperature Type-K Thermocouple with glass braid insulation.

SKU: SF-BOB-11722 | Brand: SparkFun

This is a clever little breakout board for both the RGB and R/G illuminated rotary encoders. On one side, it breaks out all of the RGB pins to standard, breadboard friendly, 0.1" headers. Turn it over and it has a foo...

SKU: DF-DFR0008 | Brand: DFRobot

The upgraded Arduino Input Shield includes a two axis mini joystick (with moment switch) as well as four colored push buttons(Red,Yellow,Blue,Green). The reserved APC220 Radio Data Module(SKU:TEL0005) interface...

SKU: PL-2179 | Brand: Pololu

This connector, a smaller version of the male Tamiya plug, is commonly used with battery packs for RC applications. The connector is keyed so that power cannot be reversed, and a latch secures the connection so that ...

SKU: SF-WRL-00144 | Brand: SparkFun

A tiny 2.4 GHz ceramic chip antenna designed for surface-mount PCB layouts. While it won't match the range of a full-size rubber duck antenna, its extremely compact footprint lets you add wireless capability to space-...

SKU: DF-DFR0061 | Brand: DFRobot

The Gravity Joystick Module V2 provides two-axis analogue control (X and Y) plus a digital push-button switch. Connect the two analogue outputs and one digital output to your Arduino or other microcontroller for intui...

SKU: SF-PRT-00091 | Brand: SparkFun

A classic 9V battery snap connector terminated with a 2-pin polarised Molex connector. Ideal for quick-connect battery power in breadboard and prototyping setups. Key Features Molex Terminated – 2-pin polarised con...

SKU: AF-2895 | Brand: Adafruit

The Adafruit Non-Latching Mini Relay FeatherWing lets you control mains-powered devices and small appliances using any Feather microcontroller. Switch lamps, fans, solenoids, and other loads rated up to 250 VAC or DC ...