Brands and Manufacturers

SKU: AF-3966 | Brand: Adafruit

The BMP388 from Bosch is a high-precision barometric pressure and temperature sensor, offering significantly improved altitude accuracy over the BMP280. With altitude noise as low as 0.1 metres and a relative accuracy...

SKU: AF-3763 | Brand: Adafruit

We're keepin' it wheel with this one! Plastic gear-box motors (also known as 'TT' motors) are an easy and low cost way to get your projects moving. But we've noticed that there are not a lot of nice TT motor&n...

SKU: AF-3628 | Brand: Adafruit

This adapter converts a USB-A male plug into a 5-pin screw terminal block, making it easy to connect bare wires to a USB port without soldering. Just loosen the terminal screws, insert your stranded or solid-core wire...

SKU: DF-SEN0230 | Brand: DFRobot

This is an industrial incremental photoelectric rotary encoder with aluminum material, metal shell and stainless steel shaft. It generates AB two-phase orthogonal pulse signal though the rotation of the grating dis...

SKU: DF-DFR0464 | Brand: DFRobot

A 16×2 character LCD module with full RGB backlight, communicating over I2C for minimal wiring. With support for 16 million backlight colours, this display adds a vibrant, customisable readout to your Arduino or compa...

SKU: AF-937 | Brand: Adafruit

This handy USB extension cable will make it easy for you to enclose a device that has a micro-B type port. We think this would be most handy when putting an Arduino Leonardo or Raspberry Pi in a box.The jack half h...

SKU: TB-ZL3386 | Brand: Little Bird

LM386N-1 - 8 - Low voltage 325mW amplifier Specifications active mount type Through Hole active connector type ...

SKU: PI-COM-B015 | Brand: Pimoroni

This clicky joystick is great for DIY arcade builds, and it has a handy 5-pin connector that means connecting it is just a case of plugging in a single cable connector. We use this joystick in our new ...

SKU: AF-1178 | Brand: Adafruit

Rollin' rollin' rollin', you can now roll around smooth as silk with these radial bearings. Often referred to as "skate bearings" They're good for supporting a rotating rod or as a wheel hub. However, these are higher...

SKU: LB-LS1216 | Brand: Little Bird

This sensor is composed of an infrared emitter on one upright and a shielded infrared detector on the other. By emitting a beam of infrared light from one upright to the other, the sensor can detect when an object pas...

SKU: AF-4031 | Brand: Adafruit

Pipe audio in or out of your project with this very handy breadboard-friendly audio jack. It's a stereo jack so you get left and right channels as well as a ground pin. You can use any 3.5mm stereo cable with this jac...

SKU: AF-1405 | Brand: Adafruit

Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to get you started with this fun wearable computer. Included are enough parts to make your first wearable electronic pr...

SKU: LB-00252 | Brand: Little Bird

The Raspberry Pi Zero extends (and shrinks) the Raspberry Pi family down to a fast little gum stick sized computer. Like the Pi Zero, it also has: 1GHz, single-core CPU 512MB RAM Mini HDMI and USB On-The-Go ports ...

SKU: SS-103030195 | Brand: Seeed Studio

The Grove Shield for micro:bit is a plug-and-play expansion board that bridges the micro:bit with the Seeed Studio Grove ecosystem. It provides 4 Grove connectors on-board (covering different interfaces) with provisio...

SKU: AF-1756 | Brand: Adafruit

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...

SKU: AF-1755 | Brand: Adafruit

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...

SKU: AF-2430 | Brand: Adafruit

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also i...

SKU: AF-2442 | Brand: Adafruit

Need to make a tiny robot? This little micro servo rotates 360 degrees fully forward or backwards, instead of moving to a single position. You can use any servo code, hardware or library to control these servos. ...

SKU: DF-FIT0085 | Brand: DFRobot

This custom-designed plastic wheel has a rubber tire measuring 1.65" (42 mm) in diameter and is designed to fit the output shafts on our mini metal gearmotors as well as the Solarbotics metal gear motors. Teeth on...

SKU: DF-SEN0032 | Brand: DFRobot

Breakout board for the Analog Device ADXL345. The ADXL345 is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16 g. Digital output data is formatted as 16-bit twos ...