Batteries

SKU: AF-1321 | Brand: Adafruit

A standard alkaline 9V battery for powering portable electronics projects, kits, and prototypes. These batteries use alkaline (MnO2) chemistry with a voltage range of 9.6V (fresh) to 4.8V (depleted). At a 50mA dischar...

SKU: AF-875 | Brand: Adafruit

This 8×AA battery holder provides a portable power source with a built-in on/off switch and a standard 5.5 mm / 2.1 mm DC barrel plug for easy connection to Arduino boards, LED strips, motors, and other 12V devices. U...

SKU: LB-LS3337 | Brand: Little Bird

An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid fully covers the batteries, keeping them secure during use. Wire leads allow you to connect directly to your project. Thre...

SKU: PL-1145 | Brand: Pololu

This battery holder accommodates 4× AAA batteries in series, providing approximately 6V from alkaline cells or 4.8V from NiMH rechargeables. It features wire leads for connecting to your electronics projects. Key Fea...

SKU: DF-FIT0362 | Brand: DFRobot

This battery holder takes three AA cells and provides a simple way to power compatible Arduino-style boards via a Micro USB connection.Use it with NiMH or NiCd rechargeable cells for a 3.6V battery pack, or with alkal...

SKU: SF-PRT-09518 | Brand: SparkFun

A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack on the other end. Plug it onto a standard 9V battery and connect directly to any device with an onboard barrel jack — perfect for powering...

SKU: DF-FIT0918 | Brand: DFRobot

A compact 4×AA battery holder with a built-in on/off power switch, DC2.1 barrel jack output, and a protective cover. Ideal for powering Arduino, Raspberry Pi, and other microcontroller projects with a portable 6V supp...

SKU: DF-FIT0131 | Brand: DFRobot

A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack. Plug a 9V battery into one end and connect the other to any device with an onboard barrel jack — ideal for powering Arduinos, development...

SKU: AF-3456 | Brand: Adafruit

This 5×AA battery holder delivers approximately 7.5V from five AA batteries, terminated with a 2.1mm DC barrel plug (centre positive). It provides the ideal voltage for Arduino boards and other development boards with...

SKU: TB-SB2332 | Brand: Little Bird

Stock up and save with this bulk pack of 40 AA alkaline batteries. Ideal for keeping your workshop, classroom, or household powered without running out at critical moments. These reliable 1.5V batteries are mercury a...

SKU: DF-FIT0626 | Brand: DFRobot

This battery holder connects 3× AAA batteries in series, providing approximately 4.5V from alkaline cells. It features a PH2.0-2P connector, making it compatible with DFRobot boards and other devices that use the PH2....

SKU: AF-3784 | Brand: Adafruit

A 4×AA battery holder with a 20cm (8″) power cable terminating in a centre-positive 2.1mm DC barrel jack. Provides a portable power source for development boards and projects that accept a standard DC barrel jack inpu...

SKU: PI-COM1304 | Brand: Pimoroni

A 4×AA battery holder with press-stud (snap) termination, providing a portable power source for wearable and on-the-go projects. With four alkaline AA batteries, it delivers approximately 6V with 7,000–10,000 mAh of c...

SKU: DF-FIT0141 | Brand: DFRobot

A 6×AA battery holder with a DC 2.1mm power jack that plugs directly into an Arduino's barrel jack input. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Features mounti...

SKU: AF-3842 | Brand: Adafruit

A compact battery holder for three AA cells with an integrated power cable and DC barrel jack. The series configuration delivers approximately 3.6–4.5V depending on battery chemistry, making it a convenient power sour...

SKU: TB-SB2329 | Brand: Little Bird

A 24-pack of Eclipse alkaline AA batteries. General-purpose disposable batteries suitable for a wide range of electronics, toys, remote controls, and other devices. Specifications Type – AA (LR6) Chemistry – Alkal...

SKU: AF-248 | Brand: Adafruit

A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells f...

SKU: AF-3286 | Brand: Adafruit

A slim 3×AAA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making i...

SKU: AF-3287 | Brand: Adafruit

A compact 3×AA battery holder with a built-in on/off switch, JST 2-pin connector, and an ergonomic belt clip. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making...

SKU: AF-3788 | Brand: Adafruit

A 4×AA battery holder with a built-in on/off switch and a 13cm (5″) power cable terminating in a centre-positive 2.1mm DC barrel jack. Provides convenient portable power with easy switching for development boards and ...