Batteries

SKU: PL-1152 | Brand: Pololu

An enclosed battery holder for three AA cells with a built-in on/off switch. The snap-on lid slides over the batteries to fully enclose them, keeping the cells secure during use. Provides approximately 4.5 V with thr...

SKU: DF-FIT0080 | Brand: DFRobot

A 4-cell AA battery holder in a square (2×2) configuration with a sliding removable cover and a built-in ON/OFF switch. Features 5-inch tinned leads for easy soldering. The cover keeps batteries secure, and the switch...

SKU: DF-FIT0266 | Brand: DFRobot

A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black w...

SKU: AF-830 | Brand: Adafruit

A 4×AA battery holder with a snap-on cover and built-in on/off switch. Holds four AA batteries in series, outputting a nominal 6V (alkaline) or 4.8V (NiMH), making it a convenient portable power source for 5V microcon...

SKU: AF-67 | Brand: Adafruit

A 9V battery holder with a built-in on/off switch and a pre-attached 5.5mm/2.1mm centre-positive barrel plug. Ready to use out of the box — snap in a 9V battery, plug into your Arduino or other development board, and ...

SKU: LB-LR0309-20 | Brand: Little Bird

A simple single-slot 9V battery holder case with wire leads for soldering or connecting directly to your projects. Keeps your battery secure and organised. Key Features Wire Leads – Pre-attached cables for direct s...

SKU: AF-3859 | Brand: Adafruit

A 4×AA battery holder with premium jumper header wires that plug directly into a breadboard. No stripping or soldering required — just insert the header pins into your breadboard rails and start prototyping with porta...

SKU: AF-449 | Brand: Adafruit

This 8×AA battery holder provides a portable 12V power source by connecting 8 AA batteries end-to-end in series. It delivers approximately 12VDC with alkaline cells (9.6V with NiMH rechargeables) and supports up to 2A...

SKU: LB-1147 | Brand: Little Bird

An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid keeps batteries secure during use, and the integrated switch lets you toggle power without disconnecting leads. Provides a...

SKU: AF-727 | Brand: Adafruit

A slim 3×AAA battery holder with a built-in on/off switch and JST 2-pin connector. The series configuration outputs approximately 3.6–4.5V — a similar range to lithium-ion batteries — making it an ideal non-rechargeab...

SKU: DF-FIT0610 | Brand: DFRobot

This enclosed battery holder takes 3× AA batteries in series, providing approximately 4.5V from alkaline cells or 3.6V from NiMH/NiCd rechargeables. It features a built-in on/off switch and a sliding, removable cover ...

SKU: AF-4779 | Brand: Adafruit

This compact battery holder connects 3× AA batteries in series, providing 3.3–4.5V output — a similar range to lithium-ion/polymer batteries. It features a built-in on/off switch and a genuine JST-PH 2-pin connector w...

SKU: LB-LR0309-16 | Brand: Little Bird

A flat 4×AA battery holder with a 2.1mm DC barrel jack connector, providing an easy way to power Arduino boards and other projects that accept a DC barrel plug. With four alkaline AA batteries installed, it delivers a...

SKU: LB-LR0294 | Brand: Little Bird

A simple 6-cell AA battery holder with a 125mm (5") cable terminated with a standard 5.5×2.1mm centre-positive barrel jack connector. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alk...

SKU: DF-FIT0079 | Brand: DFRobot

A simple 4-cell AA battery holder in a square (2×2) configuration. Features 5-inch tinned leads for easy soldering into your project. Provides 6V nominal output with four AA alkaline batteries, or 4.8V with rechargeab...

SKU: AF-875 | Brand: Adafruit

This 8×AA battery holder provides a portable power source with a built-in on/off switch and a standard 5.5 mm / 2.1 mm DC barrel plug for easy connection to Arduino boards, LED strips, motors, and other 12V devices. U...

SKU: LB-LS3337 | Brand: Little Bird

An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid fully covers the batteries, keeping them secure during use. Wire leads allow you to connect directly to your project. Thre...

SKU: PL-1145 | Brand: Pololu

This battery holder accommodates 4× AAA batteries in series, providing approximately 6V from alkaline cells or 4.8V from NiMH rechargeables. It features wire leads for connecting to your electronics projects. Key Fea...

SKU: DF-FIT0362 | Brand: DFRobot

This battery holder can hold 3 AA batteries which provides 3.6V rechargeable battery pack with NiMH / NiCd cells or 4.5V battery pack with Alkaline cells. You will be able to power your Arduino with this battery hold...

SKU: DF-FIT0918 | Brand: DFRobot

A compact 4×AA battery holder with a built-in on/off power switch, DC2.1 barrel jack output, and a protective cover. Ideal for powering Arduino, Raspberry Pi, and other microcontroller projects with a portable 6V supp...