Batteries
Shop batteries for your electronics projects in Australia, including LiPo, Li-Ion, NiMH, AA, AAA, coin cell, and 18650 rechargeable batteries. We also stock battery holders, chargers, and battery packs for every setup.
Whether you're powering a robot, wearable, IoT sensor, or classroom STEM kit, find the right battery and holder with convenient connectors like JST. Reliable power for makers, hobbyists, and educators — shipped from Australia.
4xAA battery holder (square with cover)
SKU: DF-FIT0080 | Brand: DFRobot
A 4-cell AA battery holder in a square (2×2) configuration with a sliding removable cover and a built-in ON/OFF switch. Features 5-inch tinned leads for easy soldering. The cover keeps batteries secure, and the switch...
Delivered by Fri 16 Oct
6xAA battery holder
SKU: DF-FIT0266 | Brand: DFRobot
A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black w...
Delivered by Fri 16 Oct
8 x AA battery holder
SKU: AF-449 | Brand: Adafruit
This 8×AA battery holder provides a portable 12V power source by connecting 8 AA batteries end-to-end in series. It delivers approximately 12VDC with alkaline cells (9.6V with NiMH rechargeables) and supports up to 2A...
Delivered by Fri 16 Oct
Battery Holder 4xAA with Cover and Switch
SKU: SF-PRT-12083 | Brand: SparkFun
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...
Delivered by Fri 16 Oct
4xAA battery holder (square)
SKU: DF-FIT0079 | Brand: DFRobot
A simple 4-cell AA battery holder in a square (2×2) configuration. Features 5-inch tinned leads for easy soldering into your project. Provides 6V nominal output with four AA alkaline batteries, or 4.8V with rechargeab...
Delivered by Fri 16 Oct
Battery Holder 3xAA with Cover and Switch
SKU: SF-PRT-10891 | Brand: SparkFun
This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...
Delivered by Fri 16 Oct
2 x AA Battery Holder with Knife Switch
SKU: AF-3951 | Brand: Adafruit
A 2×AA battery holder with a built-in knife switch for controlling power. Unlike typical slide switches, the knife switch provides a clear visual indicator of open and closed circuit states — making it an excellent to...
Delivered by Mon 9 Nov
1 X AA Battery Holder
SKU: TB-PH9203 | Brand: Little Bird
This holder provides a simple way to add one AA cell to a battery-powered project. It is moulded in Delrin and uses corrosion-resistant nickel-plated springs and studs for reliable contact.The 150 mm bare lead connect...
Delivered by Fri 16 Oct
Waterproof 2xAA Battery Holder with On/Off Switch
SKU: AF-770 | Brand: Adafruit
Keep your power source safe and toasty in these waterproof 2xAA battery holders. They're just like classic switched battery holders, but designed for survival! The case has a rubber gasket around the edge of the ca...
Delivered by Mon 9 Nov
Waterproof 3xAA Battery Holder with On/Off Switch
SKU: AF-771 | Brand: Adafruit
Keep your power source safe and toasty in these waterproof 3xAA battery holders. They're just like classic switched battery holders, but designed for survival! The case has a rubber gasket around the edge of the ca...
Delivered by Mon 9 Nov
6xAA Battery Holder(double layer)
SKU: DF-FIT0078 | Brand: DFRobot
A double-layer 6×AA battery holder with a stacked 3+3 cell arrangement for a more compact footprint. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Comes with 150mm (6"...
Delivered by Fri 16 Oct
