Batteries
Shop batteries for your electronics projects in Australia, including LiPo, Li-Ion, NiMH, AA, AAA, coin cell, and 18650 rechargeable batteries. We also stock battery holders, chargers, and battery packs for every setup.
Whether you're powering a robot, wearable, IoT sensor, or classroom STEM kit, find the right battery and holder with convenient connectors like JST. Reliable power for makers, hobbyists, and educators — shipped from Australia.
4xAA battery holder (square with cover)
SKU: DF-FIT0080 | Brand: DFRobot
A 4-cell AA battery holder in a square (2×2) configuration with a sliding removable cover and a built-in ON/OFF switch. Features 5-inch tinned leads for easy soldering. The cover keeps batteries secure, and the switch...
Delivered by Tue 16 Jun
4 x AA Battery Holder with On/Off Switch
SKU: AF-830 | Brand: Adafruit
A 4×AA battery holder with a snap-on cover and built-in on/off switch. Holds four AA batteries in series, outputting a nominal 6V (alkaline) or 4.8V (NiMH), making it a convenient portable power source for 5V microcon...
Delivered by Tue 16 Jun
4 x AA Battery Holder with Premium Jumper Header Wires
SKU: AF-3859 | Brand: Adafruit
A 4×AA battery holder with premium jumper header wires that plug directly into a breadboard. No stripping or soldering required — just insert the header pins into your breadboard rails and start prototyping with porta...
Delivered by Tue 16 Jun
Battery Holder 4xAA with Cover and Switch
SKU: SF-PRT-12083 | Brand: SparkFun
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...
Delivered by Tue 16 Jun
4xAA battery holder (square)
SKU: DF-FIT0079 | Brand: DFRobot
A simple 4-cell AA battery holder in a square (2×2) configuration. Features 5-inch tinned leads for easy soldering into your project. Provides 6V nominal output with four AA alkaline batteries, or 4.8V with rechargeab...
Delivered by Tue 16 Jun
Battery Holder - 4xAA Square
SKU: SF-PRT-00552 | Brand: SparkFun
Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration.
Delivered by Thu 25 Jun
Smart Charger for 18650 4.2V Li-ion battery with 2 x 18650
SKU: LB-LS4126-LS1558 | Brand: Little Bird
FeaturesIndependent Charging: Each of the four slots operates independently, allowing simultaneous charging of different battery sizes or charge levels.LED Indicator Lights: Red – Charging Green – Fully Charged S...
Delivered by Tue 16 Jun
4x AA Battery Holder (with Power Switch, DC2.1 Jack, and Cover)
SKU: DF-FIT0918 | Brand: DFRobot
A compact 4×AA battery holder with a built-in on/off power switch, DC2.1 barrel jack output, and a protective cover. Ideal for powering Arduino, Raspberry Pi, and other microcontroller projects with a portable 6V supp...
Delivered by Tue 16 Jun
Battery Holder - 4xAA to Barrel Jack Connector
SKU: SF-PRT-09835 | Brand: SparkFun
This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector. The connector mates with the barrel jack on the Arduino (among a numbe...
Delivered by Tue 16 Jun
4 x AA Battery Holder with 2.1mm Plug and On/Off Switch
SKU: AF-3788 | Brand: Adafruit
A 4×AA battery holder with a built-in on/off switch and a 13cm (5″) power cable terminating in a centre-positive 2.1mm DC barrel jack. Provides convenient portable power with easy switching for development boards and ...
Delivered by Mon 6 Jul
Alkaline AA batteries (LR6) - 4 pack
SKU: AF-3349 | Brand: Adafruit
A 4-pack of standard alkaline AA batteries for powering portable electronics, kits, and projects. These use alkaline (MnO2) chemistry with a voltage range of 1.6V (fresh) to 0.8V (depleted) and a typical capacity of a...
Delivered by Mon 6 Jul
