Batteries

SKU: DF-FIT0080 | Brand: DFRobot

A 4-cell AA battery holder in a square (2×2) configuration with a sliding removable cover and a built-in ON/OFF switch. Features 5-inch tinned leads for easy soldering. The cover keeps batteries secure, and the switch...

SKU: AF-830 | Brand: Adafruit

A 4×AA battery holder with a snap-on cover and built-in on/off switch. Holds four AA batteries in series, outputting a nominal 6V (alkaline) or 4.8V (NiMH), making it a convenient portable power source for 5V microcon...

SKU: AF-3859 | Brand: Adafruit

A 4×AA battery holder with premium jumper header wires that plug directly into a breadboard. No stripping or soldering required — just insert the header pins into your breadboard rails and start prototyping with porta...

SKU: SF-PRT-12083 | Brand: SparkFun

This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...

SKU: LB-LR0309-16 | Brand: Little Bird

A flat 4×AA battery holder with a 2.1mm DC barrel jack connector, providing an easy way to power Arduino boards and other projects that accept a DC barrel plug. With four alkaline AA batteries installed, it delivers a...

SKU: DF-FIT0079 | Brand: DFRobot

A simple 4-cell AA battery holder in a square (2×2) configuration. Features 5-inch tinned leads for easy soldering into your project. Provides 6V nominal output with four AA alkaline batteries, or 4.8V with rechargeab...

SKU: SF-PRT-00552 | Brand: SparkFun

Simple 4 Cell AA Battery holder with 5" tinned leads, square configuration.

SKU: DF-FIT0918 | Brand: DFRobot

A compact 4×AA battery holder with a built-in on/off power switch, DC2.1 barrel jack output, and a protective cover. Ideal for powering Arduino, Raspberry Pi, and other microcontroller projects with a portable 6V supp...

SKU: PI-COM1304 | Brand: Pimoroni

A 4×AA battery holder with press-stud (snap) termination, providing a portable power source for wearable and on-the-go projects. With four alkaline AA batteries, it delivers approximately 6V with 7,000–10,000 mAh of c...

SKU: SF-PRT-09835 | Brand: SparkFun

This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector. The connector mates with the barrel jack on the Arduino (among a numbe...

SKU: TB-MB3563 | Brand: Little Bird

Keep your Eneloop and other Ni-MH batteries charged and ready to go with this lightweight Panasonic charger. It charges both AA and AAA batteries and includes 4× AA Eneloop batteries straight out of the box. Eneloop ...

SKU: AF-3788 | Brand: Adafruit

A 4×AA battery holder with a built-in on/off switch and a 13cm (5″) power cable terminating in a centre-positive 2.1mm DC barrel jack. Provides convenient portable power with easy switching for development boards and ...

SKU: AF-3349 | Brand: Adafruit

A 4-pack of standard alkaline AA batteries for powering portable electronics, kits, and projects. These use alkaline (MnO2) chemistry with a voltage range of 1.6V (fresh) to 0.8V (depleted) and a typical capacity of a...

SKU: AF-3784 | Brand: Adafruit

A 4×AA battery holder with a 20cm (8″) power cable terminating in a centre-positive 2.1mm DC barrel jack. Provides a portable power source for development boards and projects that accept a standard DC barrel jack inpu...

SKU: AF-3905 | Brand: Adafruit

This compact 2×2 AA battery holder connects four AA batteries in series, providing a nominal 6 V DC output (alkaline) or 4.8 V DC (rechargeable NiMH). The premium jumper header wires plug directly into a breadboard — ...