Batteries

SKU: AF-1781 | Brand: Adafruit

A 3.7V 2,200 mAh lithium-ion cylindrical battery with built-in protection circuitry for over-voltage, under-voltage, and over-current protection. Slim enough to fit into many project enclosures and includes a JST 2-pi...

SKU: LB-LR0295 | Brand: Little Bird

A simple 9V battery holder with a DC barrel connector. Provides a convenient way to mount and connect a 9V battery to your electronics projects. Key Features DC Barrel Connector – Standard connector for easy integr...

SKU: LB-LS1558 | Brand: Little Bird

A standard 18650 lithium-ion rechargeable battery with a built-in protection circuit for safe operation. The integrated PCB provides overcharge, over-discharge, and short-circuit protection, making it a reliable power...

SKU: DF-FIT0111 | Brand: DFRobot

A classic 9V battery snap connector with bare wire leads, 15 cm in length. Pair it with a DC Barrel Jack Adapter – Male to power an Arduino directly from a 9V battery. Key Features Bare Wire Leads – Solder or conne...

SKU: AF-4236 | Brand: Adafruit

A 3.7 V lithium-ion polymer (LiPo) battery with 420 mAh capacity (approximately 1.55 Wh). It features a short cable with a genuine 2-pin JST-PH connector that clicks smoothly into matching JST jacks without snagging. ...

SKU: LB-LR0296 | Brand: Little Bird

A 9V battery clip adapter with a standard 5.5 × 2.1 mm centre-positive barrel jack. Use it to power any device that accepts 9V input through an onboard barrel jack connector. Key Features 9V Battery Snap – Standard...

SKU: AF-4237 | Brand: Adafruit

A compact 3.7 V 350 mAh lithium-ion polymer (LiPo) battery with a short cable and genuine 2-pin JST-PH connector. The slim, lightweight form factor makes it ideal for wearables, IoT devices, and portable electronics p...

SKU: TB-SB2300 | Brand: Little Bird

A 14500-size rechargeable lithium-ion battery with 800mAh capacity and 3.7V nominal voltage. The 14500 form factor is the same size as a standard AA battery, making it a common choice for LED torches and other compact...

SKU: DF-DFR0668 | Brand: DFRobot

This is a Type-C  Lipo charger designed for single-cell 3.7V lithium battery. The compact size makes it easy to integrate into your applications. The charger adopts TP4056X lithium battery charging IC, which guar...

SKU: AF-2750 | Brand: Adafruit

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 350mAh for a total of about...

SKU: AF-67 | Brand: Adafruit

A 9V battery holder with a built-in on/off switch and a pre-attached 5.5mm/2.1mm centre-positive barrel plug. Ready to use out of the box — snap in a 9V battery, plug into your Arduino or other development board, and ...

SKU: LB-LR0309-20 | Brand: Little Bird

A simple single-slot 9V battery holder case with wire leads for soldering or connecting directly to your projects. Keeps your battery secure and organised. Key Features Wire Leads – Pre-attached cables for direct s...

SKU: SF-PRT-10218 | Brand: SparkFun

A standard 9V alkaline battery (Rayovac). Suitable for powering Arduino boards, breadboard projects, and other electronics — use with a voltage regulator to get a stable 5V output. Key Features 9V Alkaline – Standa...

SKU: DF-DFR0208 | Brand: DFRobot

If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The Lithium Battery Charger can charge 3.7V LiPo battery at a rate of 500mA per hour. It is designed to charge single-cel...

SKU: SF-PRT-09518 | Brand: SparkFun

A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack on the other end. Plug it onto a standard 9V battery and connect directly to any device with an onboard barrel jack — perfect for powering...

SKU: LB-LR0309-18 | Brand: Little Bird

A single-cell 18650 battery holder with bare wire leads, designed for easy integration of 18650 lithium-ion cells into your electronics projects. Simply drop in a battery and connect the leads — no soldering or connec...

SKU: DF-FIT0131 | Brand: DFRobot

A simple 9V battery clip cable with a 5.5 × 2.1 mm centre-positive barrel jack. Plug a 9V battery into one end and connect the other to any device with an onboard barrel jack — ideal for powering Arduinos, development...

SKU: DF-FIT0611 | Brand: DFRobot

This compact rechargeable power module is designed for micro:bit-based Maqueen educational robots. It holds a single CR123A 3.6V lithium rechargeable battery and provides a tidy power solution for classroom robotics, ...

SKU: SF-DEV-11893 | Brand: SparkFun

The LilyPad Simple Power is a simple e-textile board that lets you connect and charge a lipo battery and switch it on or off, that’s it! We provide you with a JST connector and a slide switch, you supply the battery a...

SKU: SF-PRT-13113 | Brand: SparkFun

This is a PCB mount clip to hold a 18650 Lithium Ion Cell battery. Each battery holder is sold in single units, you’ll need two for each battery. These work great for larger, high capacity applications where a drop-in...