Batteries

SKU: WS-19694 | Brand: Waveshare

Uninterruptible Power Supply For Pico Keeps Your Pico Running While Recharging, Monitoring Battery Status Via I2C Features At A Glance The Pico-UPS-A is a dedicated UPS (Uninterruptible Power Supply...

SKU: LB-PAPER-BATTERY | Brand: Little Bird

Paper circuits are a fantastic way to  teach the basics and fundamentals of creating an electric circuit without the need to solder or code a single thing! If you are unfamiliar, a paper circuit is a function...

SKU: AF-328 | Brand: Adafruit

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 2500mAh for a total of abou...

SKU: AF-258 | Brand: Adafruit

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 1200mAh for a total of abou...

SKU: LB-MICROACC | Brand: Little Bird

Handy accessories to get you started with micro:bit! This  little kit has a battery pack with switch for portable projects, and a micro-USB cable to connect your micro:bit to your computer to start your coding...

SKU: AF-1578 | Brand: Adafruit

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 500mAh for a total of about...

SKU: AF-3898 | Brand: Adafruit

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 400mAh for a total of about...

SKU: DF-FIT0111 | Brand: DFRobot

A classic 9V battery snap connector with bare wire leads, 15 cm in length. Pair it with a DC Barrel Jack Adapter – Male to power an Arduino directly from a 9V battery. Key Features Bare Wire Leads – Solder or conne...

SKU: AF-1566 | Brand: Adafruit

A large-sized rechargeable battery pack for your Raspberry Pi (or Arduino, or Propeller, or anything else that uses 5V!). This pack is intended for providing a lot of power to an GPS, cell phone, tablet, etc but...

SKU: SF-PRT-09547 | Brand: SparkFun

A 2×AA battery holder with a sliding cover secured by a Phillips head screw and a built-in ON/OFF switch for convenient power control. The 150mm tinned leads make it easy to solder into your projects. Key Features ...

SKU: AF-4237 | Brand: Adafruit

A compact 3.7 V 350 mAh lithium-ion polymer (LiPo) battery with a short cable and genuine 2-pin JST-PH connector. The slim, lightweight form factor makes it ideal for wearables, IoT devices, and portable electronics p...

SKU: DF-FIT0080 | Brand: DFRobot

A 4-cell AA battery holder in a square (2×2) configuration with a sliding removable cover and a built-in ON/OFF switch. Features 5-inch tinned leads for easy soldering. The cover keeps batteries secure, and the switch...

SKU: LB-LS5508 | Brand: Little Bird

A 2×AA battery holder with a protective cover, built-in on/off switch, and large alligator clip leads. The alligator clips make it easy to connect to circuits, components, and conductive materials without soldering — ...

SKU: SF-PRT-15101 | Brand: SparkFun

This two-cell AAA battery holder is made for powering BBC micro:bit projects without needing to stay tethered to USB.The attached 6" (~150mm) lead is terminated with a JST-PH connector that mates with the JST socket o...

SKU: TB-SB2300 | Brand: Little Bird

A 14500-size rechargeable lithium-ion battery with 800mAh capacity and 3.7V nominal voltage. The 14500 form factor is the same size as a standard AA battery, making it a common choice for LED torches and other compact...

SKU: AF-2750 | Brand: Adafruit

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of 350mAh for a total of about...

SKU: DF-FIT0266 | Brand: DFRobot

A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black w...

SKU: AF-354 | Brand: Adafruit

Need a big battery for your project? This lithium ion pack is made of 2 balanced 2200mAh cells for a total of 4400mA capacity! The cells are connected in parallel and spot-welded to a protection circuit that provid...

SKU: AF-830 | Brand: Adafruit

A 4×AA battery holder with a snap-on cover and built-in on/off switch. Holds four AA batteries in series, outputting a nominal 6V (alkaline) or 4.8V (NiMH), making it a convenient portable power source for 5V microcon...

SKU: LB-BATTERYAA | Brand: Little Bird

A 2× AA battery holder with on/off switch, designed for powering the BBC micro:bit on the go. The JST connector plugs directly into the micro:bit's battery port, and the ~14 cm cable provides enough length for flexibl...