Batteries
Shop batteries for your electronics projects in Australia, including LiPo, Li-Ion, NiMH, AA, AAA, coin cell, and 18650 rechargeable batteries. We also stock battery holders, chargers, and battery packs for every setup.
Whether you're powering a robot, wearable, IoT sensor, or classroom STEM kit, find the right battery and holder with convenient connectors like JST. Reliable power for makers, hobbyists, and educators — shipped from Australia.
9V Snap Connector
SKU: DF-FIT0111 | Brand: DFRobot
A classic 9V battery snap connector with bare wire leads, 15 cm in length. Pair it with a DC Barrel Jack Adapter – Male to power an Arduino directly from a 9V battery. Key Features Bare Wire Leads – Solder or conne...
Delivered by Tue 18 Aug
Battery Holder 2xAA with Cover and Switch
SKU: SF-PRT-09547 | Brand: SparkFun
A 2×AA battery holder with a sliding cover secured by a Phillips head screw and a built-in ON/OFF switch for convenient power control. The 150mm tinned leads make it easy to solder into your projects. Key Features ...
Delivered by Tue 18 Aug
4xAA battery holder (square with cover)
SKU: DF-FIT0080 | Brand: DFRobot
A 4-cell AA battery holder in a square (2×2) configuration with a sliding removable cover and a built-in ON/OFF switch. Features 5-inch tinned leads for easy soldering. The cover keeps batteries secure, and the switch...
Delivered by Tue 18 Aug
6xAA battery holder
SKU: DF-FIT0266 | Brand: DFRobot
A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black w...
Delivered by Tue 18 Aug
Battery Holder 4xAA with Cover and Switch
SKU: SF-PRT-12083 | Brand: SparkFun
This 4xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...
Delivered by Tue 18 Aug
4xAA battery holder (square)
SKU: DF-FIT0079 | Brand: DFRobot
A simple 4-cell AA battery holder in a square (2×2) configuration. Features 5-inch tinned leads for easy soldering into your project. Provides 6V nominal output with four AA alkaline batteries, or 4.8V with rechargeab...
Delivered by Tue 18 Aug
Battery Holder 3xAA with Cover and Switch
SKU: SF-PRT-10891 | Brand: SparkFun
This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is secured with a small phillips head screw. Another bonus is the ON/OFF swi...
Delivered by Tue 18 Aug
Battery Holder - 2x18650 (wire leads)
SKU: SF-PRT-12900 | Brand: SparkFun
This is an incredibly simple two cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with...
Delivered by Tue 18 Aug
Battery Holder - 2xAAA with Cover and Switch
SKU: SF-PRT-14219 | Brand: SparkFun
A 2×AAA battery holder with a sliding cover and built-in ON/OFF switch. The cover keeps batteries secure, and the switch provides convenient power control for your project. Wire leads are approximately 150 mm long wit...
Delivered by Tue 18 Aug
6xAA Battery Holder(double layer)
SKU: DF-FIT0078 | Brand: DFRobot
A double-layer 6×AA battery holder with a stacked 3+3 cell arrangement for a more compact footprint. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Comes with 150mm (6"...
Delivered by Tue 18 Aug
