Batteries

SKU: DF-FIT0111 | Brand: DFRobot

A classic 9V battery snap connector with bare wire leads, 15 cm in length. Pair it with a DC Barrel Jack Adapter – Male to power an Arduino directly from a 9V battery. Key Features Bare Wire Leads – Solder or conne...

SKU: LB-LR0296 | Brand: Little Bird

A 9V battery clip adapter with a standard 5.5 × 2.1 mm centre-positive barrel jack. Use it to power any device that accepts 9V input through an onboard barrel jack connector. Key Features 9V Battery Snap – Standard...

SKU: DF-FIT0080 | Brand: DFRobot

A 4-cell AA battery holder in a square (2×2) configuration with a sliding removable cover and a built-in ON/OFF switch. Features 5-inch tinned leads for easy soldering. The cover keeps batteries secure, and the switch...

SKU: DF-FIT0266 | Brand: DFRobot

A 6×AA battery holder with bare wire leads for creating 7.2V rechargeable battery packs (NiMH/NiCd) or 9V packs from alkaline cells. The holder features side-by-side cell placement and comes with 150mm red and black w...

SKU: AF-830 | Brand: Adafruit

A 4×AA battery holder with a snap-on cover and built-in on/off switch. Holds four AA batteries in series, outputting a nominal 6V (alkaline) or 4.8V (NiMH), making it a convenient portable power source for 5V microcon...

SKU: LB-LR0309-20 | Brand: Little Bird

A simple single-slot 9V battery holder case with wire leads for soldering or connecting directly to your projects. Keeps your battery secure and organised. Key Features Wire Leads – Pre-attached cables for direct s...

SKU: AF-449 | Brand: Adafruit

This 8×AA battery holder provides a portable 12V power source by connecting 8 AA batteries end-to-end in series. It delivers approximately 12VDC with alkaline cells (9.6V with NiMH rechargeables) and supports up to 2A...

SKU: DF-FIT0610 | Brand: DFRobot

This enclosed battery holder takes 3× AA batteries in series, providing approximately 4.5V from alkaline cells or 3.6V from NiMH/NiCd rechargeables. It features a built-in on/off switch and a sliding, removable cover ...

SKU: SF-PRT-10218 | Brand: SparkFun

A standard 9V alkaline battery (Rayovac). Suitable for powering Arduino boards, breadboard projects, and other electronics — use with a voltage regulator to get a stable 5V output. Key Features 9V Alkaline – Standa...

SKU: LB-LR0309-16 | Brand: Little Bird

A flat 4×AA battery holder with a 2.1mm DC barrel jack connector, providing an easy way to power Arduino boards and other projects that accept a DC barrel plug. With four alkaline AA batteries installed, it delivers a...

SKU: LB-LR0294 | Brand: Little Bird

A simple 6-cell AA battery holder with a 125mm (5") cable terminated with a standard 5.5×2.1mm centre-positive barrel jack connector. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alk...

SKU: DF-FIT0079 | Brand: DFRobot

A simple 4-cell AA battery holder in a square (2×2) configuration. Features 5-inch tinned leads for easy soldering into your project. Provides 6V nominal output with four AA alkaline batteries, or 4.8V with rechargeab...

SKU: AF-875 | Brand: Adafruit

This 8×AA battery holder provides a portable power source with a built-in on/off switch and a standard 5.5 mm / 2.1 mm DC barrel plug for easy connection to Arduino boards, LED strips, motors, and other 12V devices. U...

SKU: LB-LS3337 | Brand: Little Bird

An enclosed battery holder for three AAA cells with a built-in on/off switch. The snap-on lid fully covers the batteries, keeping them secure during use. Wire leads allow you to connect directly to your project. Thre...

SKU: DF-FIT0362 | Brand: DFRobot

This battery holder takes three AA cells and provides a simple way to power compatible Arduino-style boards via a Micro USB connection.Use it with NiMH or NiCd rechargeable cells for a 3.6V battery pack, or with alkal...

SKU: DF-FIT0918 | Brand: DFRobot

A compact 4×AA battery holder with a built-in on/off power switch, DC2.1 barrel jack output, and a protective cover. Ideal for powering Arduino, Raspberry Pi, and other microcontroller projects with a portable 6V supp...

SKU: AF-3456 | Brand: Adafruit

This 5×AA battery holder delivers approximately 7.5V from five AA batteries, terminated with a 2.1mm DC barrel plug (centre positive). It provides the ideal voltage for Arduino boards and other development boards with...

SKU: DF-FIT0626 | Brand: DFRobot

This battery holder connects 3× AAA batteries in series, providing approximately 4.5V from alkaline cells. It features a PH2.0-2P connector, making it compatible with DFRobot boards and other devices that use the PH2....

SKU: DF-FIT0141 | Brand: DFRobot

A 6×AA battery holder with a DC 2.1mm power jack that plugs directly into an Arduino's barrel jack input. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Features mounti...

SKU: AF-248 | Brand: Adafruit

A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells f...