Batteries
Shop batteries for your electronics projects in Australia, including LiPo, Li-Ion, NiMH, AA, AAA, coin cell, and 18650 rechargeable batteries. We also stock battery holders, chargers, and battery packs for every setup.
Whether you're powering a robot, wearable, IoT sensor, or classroom STEM kit, find the right battery and holder with convenient connectors like JST. Reliable power for makers, hobbyists, and educators — shipped from Australia.
Battery Holder 3xAA with Cover and Switch - JST Connector
SKU: SF-PRT-18769 | Brand: SparkFun
This 3xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover as well as an ON/OFF switch that can be used to control power to your project. The ...
Delivered by Fri 16 Oct
4xAA Press-Stud Battery Holder - Default
SKU: PI-COM1304 | Brand: Pimoroni
A 4×AA battery holder with press-stud (snap) termination, providing a portable power source for wearable and on-the-go projects. With four alkaline AA batteries, it delivers approximately 6V with 7,000–10,000 mAh of c...
Delivered by Fri 16 Oct
6xAA Battery Holder with DC2.1 Power Jack
SKU: DF-FIT0141 | Brand: DFRobot
A 6×AA battery holder with a DC 2.1mm power jack that plugs directly into an Arduino's barrel jack input. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Features mounti...
Delivered by Fri 16 Oct
micro:bit Battery Holder - 2xAA (JST-PH)
SKU: SF-PRT-14299 | Brand: SparkFun
This is a unique two-cell AA battery holder built specifically for the BBC micro:bit. The 6" (~150mm) cable has been terminated with a JST-PH connector. The connector mates the JST socket on the micro:bit perfectly...
Delivered by Fri 16 Oct
Battery Holder - 4xAA to Barrel Jack Connector
SKU: SF-PRT-09835 | Brand: SparkFun
This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector. The connector mates with the barrel jack on the Arduino (among a numbe...
Delivered by Fri 16 Oct
Eclipse Alkaline AA Pk 24
SKU: TB-SB2329 | Brand: Little Bird
A 24-pack of Eclipse alkaline AA batteries. General-purpose disposable batteries suitable for a wide range of electronics, toys, remote controls, and other devices. Specifications Type – AA (LR6) Chemistry – Alkal...
Delivered by Fri 16 Oct
1 X AA Battery Holder
SKU: TB-PH9203 | Brand: Little Bird
This holder provides a simple way to add one AA cell to a battery-powered project. It is moulded in Delrin and uses corrosion-resistant nickel-plated springs and studs for reliable contact.The 150 mm bare lead connect...
Delivered by Fri 16 Oct
6 x AA battery holder with 5.5mm/2.1mm plug
SKU: AF-248 | Brand: Adafruit
A 6×AA battery holder with a 5.5mm/2.1mm DC barrel plug, ready to power Arduino boards and other electronics with a standard DC jack. Use alkaline AAs for approximately 9V at 3000–4000mAh, or rechargeable NiMH cells f...
Delivered by Fri 16 Oct
Panasonic Ni-MH Battery Charger with 4 Eneloop Batteries
SKU: TB-MB3563 | Brand: Little Bird
Keep your Eneloop and other Ni-MH batteries charged and ready to go with this lightweight Panasonic charger. It charges both AA and AAA batteries and includes 4× AA Eneloop batteries straight out of the box. Eneloop ...
Delivered by Fri 16 Oct
6xAA Battery Holder(double layer)
SKU: DF-FIT0078 | Brand: DFRobot
A double-layer 6×AA battery holder with a stacked 3+3 cell arrangement for a more compact footprint. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Comes with 150mm (6"...
Delivered by Fri 16 Oct
