Batteries (LiPo, NiMH, coin cell)

SKU: DF-FIT0078 | Brand: DFRobot

A double-layer 6×AA battery holder with a stacked 3+3 cell arrangement for a more compact footprint. Creates a 7.2V rechargeable battery pack from NiMH/NiCd cells or a 9V pack from alkaline cells. Comes with 150mm (6"...

SKU: PR-PIM557 | Brand: Little Bird

This SHIM provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port. Solder this neat little square to th...

SKU: SF-PRT-12899 | Brand: SparkFun

A single-cell 18650 battery holder with wire leads for easy integration into projects. Drop in an 18650 lithium-ion cell and connect the bare wire leads to your circuit — no soldering to the battery required. Two 6" ...

SKU: TB-PH9232 | Brand: Little Bird

A premium-quality 9V battery clip built for reliability. The holder is moulded in Delrin with corrosion-resistant nickel-plated springs and studs, making it ideal for projects and products that demand a durable, long-...

SKU: KI-2271 | Brand: Kitronik

A compact 2×AAA battery cage with a JST PH connector and 145 mm colour-coded leads. Designed to plug directly into the BBC micro:bit's battery socket, providing a portable power source for classroom projects and weara...

SKU: LB-LR0347A | Brand: Little Bird

This E-Textiles  Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on ...

SKU: PL-1161 | Brand: Pololu

A battery holder for eight AA cells, arranged as two back-to-back four-cell holders. Provides up to 12V (with alkaline cells) in a compact, stackable form factor. Specifications Cell Type – AA Capacity – 8 cells ...

SKU: AF-3784 | Brand: Adafruit

A 4×AA battery holder with a 20cm (8″) power cable terminating in a centre-positive 2.1mm DC barrel jack. Provides a portable power source for development boards and projects that accept a standard DC barrel jack inpu...

SKU: AF-3905 | Brand: Adafruit

This compact 2×2 AA battery holder connects four AA batteries in series, providing a nominal 6 V DC output (alkaline) or 4.8 V DC (rechargeable NiMH). The premium jumper header wires plug directly into a breadboard — ...

SKU: AF-3858 | Brand: Adafruit

A 2×AA battery holder with premium jumper header wires that plug directly into a breadboard — no stripping, twisting, or fighting with thin leads. Two AA batteries in series provide approximately 2.5V to 3V, making th...

SKU: AF-4191 | Brand: Adafruit

A slim 2×AAA battery holder with a built-in on/off switch and genuine JST PH connector. Two AAA batteries in series provide approximately 3V — ideal for powering low-voltage electronics projects, microcontrollers, and...

SKU: AF-3951 | Brand: Adafruit

A 2×AA battery holder with a built-in knife switch for controlling power. Unlike typical slide switches, the knife switch provides a clear visual indicator of open and closed circuit states — making it an excellent to...

SKU: SF-PRT-07948 | Brand: SparkFun

A through-hole 12mm coin cell battery holder for PCB mounting. Uses friction to hold the battery securely in place — the metal housing is positive (+) and the PCB pad underneath is negative (−). Commonly used for RTC ...

SKU: SF-PRT-00783 | Brand: SparkFun

Basic 20mm coin cell holder. Posts can be inserted into 0.1" perf board! Holds the common CR2032 type batteries.

SKU: LB-CR2032-SAFE | Brand: Little Bird

A child-safe, screw-closed battery enclosure for a single CR2032 coin cell, designed to meet ACCC button battery safety guidelines. The compartment requires a screwdriver to open, preventing young children from access...

SKU: LB-PAPER-SCREW | Brand: Little Bird

A child-safe battery holder designed for paper circuits in educational settings. Features a screw-secured enclosure for the CR2032 coin cell battery, meeting ACCC safety guidelines for button batteries used around chi...

SKU: LB-BK-SAFE | Brand: Little Bird

Paper circuits are a fantastic way to  teach the basics and fundamentals of creating an electric circuit without the need to solder or code a single thing!If you are unfamiliar, a paper circuit is a functioning e...

SKU: LB-SMILE | Brand: Little Bird

This is a simple coin cell battery holder that can enclose two CR2032 batteries inside itself, and safely kept closed via two phillips head screws. Each battery holder will run batteries in series, output up to 6V, an...

SKU: LB-LS1812 | Brand: Little Bird

Sick of your batteries all floating around in a drawer or box, and then when you come to use them, most are already flat.This had box keeps all your batteries standing upright and has a battery test to show if the bat...

SKU: LB-BK-LR0347A | Brand: Little Bird

A sewable coin cell battery holder with built-in on/off slide switch, designed for e-textile and wearable electronics projects. This bulk 10-pack is ideal for classrooms, workshops, and makerspaces. Each holder accep...