Audio

SKU: PI-PPMB00130 | Brand: Pimoroni

The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control w...

SKU: TB-XC5191 | Brand: Little Bird

Compact, USB-powered stereo speakers with a space-saving design for laptops and desktop PCs. Powered directly from your computer's USB port — no batteries or plug pack required. Features a separate volume control, pow...

SKU: AF-1381 | Brand: Adafruit

This breakout board is the ultimate companion for the VLSI VS1053B DSP codec chip. The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). It can al...

SKU: DF-SEN0232 | Brand: DFRobot

The Gravity Analog Sound Level Meter is an Arduino-compatible decibel meter that accurately measures environmental noise levels. It uses an instrumentation-grade circuit with a low-noise microphone for high-precision ...

SKU: SF-CAB-08566 | Brand: SparkFun

A standard 3.5 mm stereo audio cable with a length of 6 ft (~1.8 m). Both ends feature a standard 3.5 mm TRS plug, making it suitable for audio connections, basic data transmission, or carrying analogue voltage signal...

SKU: AF-2133 | Brand: Adafruit

The Adafruit Audio FX Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins,...

SKU: DF-DFR0126 | Brand: DFRobot

This Audio Analyzer module features the MSGEQ7 graphic equalizer display filter.It will give your arduino ears. Sound is broken down into seven frequency bands and the peak level for each band can be read. The seven ...

SKU: SF-WIG-13720 | Brand: SparkFun

Make some noise with your next project! The MP3 Trigger board is built to make MP3 sound integration easier than ever. The board has 18 external trigger pins that will directly trigger pre-selected MP3 tracks, and a f...

SKU: AF-3357 | Brand: Adafruit

The Adafruit Music Maker FeatherWing turns any Feather board into a versatile audio player and MIDI synthesiser. Powered by the VS1053B codec chip, it decodes MP3, AAC, Ogg Vorbis, WMA, FLAC, WAV, and MIDI formats, wi...

SKU: SF-COM-10468 | Brand: SparkFun

The MSGEQ7 is a CMOS graphic equaliser IC that divides the audio spectrum into seven frequency bands: 63 Hz, 160 Hz, 400 Hz, 1 kHz, 2.5 kHz, 6.25 kHz, and 16 kHz. Each band is peak-detected and multiplexed to provide ...

SKU: AF-1800 | Brand: Adafruit

A solder-on 3.5 mm (1/8") stereo audio plug for building custom audio cables. Made from durable metal with a flexible spring strain relief, it provides a solid, professional-quality connection. Solder your wires to th...

SKU: AF-1804 | Brand: Adafruit

A durable 1/4" (6.35 mm) stereo in-line jack for building or repairing your own audio cables. The all-metal construction and flexible spring strain relief ensure a long-lasting, reliable connection. Simply solder you...

SKU: SF-SEN-12642 | Brand: SparkFun

The SparkFun Sound Detector is a small and very easy to use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of so...

SKU: AF-3436 | Brand: Adafruit

The Adafruit Music Maker FeatherWing with Amplifier brings powerful audio playback to any Feather board. Built around the VS1053B codec chip, it decodes a wide variety of formats including MP3, AAC, Ogg Vorbis, WMA, M...

SKU: AF-1898 | Brand: Adafruit

Listen up! This 1.1" (~30mm) diameter speaker is the perfect addition to any breadboard-based audio project where you need 8 Ohm impedance, and have 0.2W or less of power. The two pins are 15mm / 0.6" apart and ...

SKU: SF-PRT-09536 | Brand: SparkFun

Looking to add MIDI to your project? This is a female, 5-pin, right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1", making these connectors eas...

SKU: AF-876 | Brand: Adafruit

This basic cable comes with two 3.5mm (1/8" headphone jack size) stereo connectors. It's fairly straight forward, you'll commonly need these to connect two audio devices together. Cable is 6 ft long.

SKU: AF-3482 | Brand: Adafruit

This Panel Mount 10K Dual Logarithmic Potentiometer w/ On-Off Switch is a two-in-one; you get a dual-ganged potentiometer and an on-off switch. For the potentiometer-half, you've got a dual standard log-t...

SKU: LB-LS7937 | Brand: Little Bird

Compact and easy to integrate, this Bluetooth audio module is a reliable solution for DIY wireless audio projects, portable speakers, and embedded systems. Designed to operate on a wide 3.7–5V DC input, it's ideal for...

SKU: LB-LS7857 | Brand: Little Bird

USB C to 3.5mm Audio Headphone Jack DAC AdapterOverviewThe USB C to 3.5mm Audio Headphone Jack DAC Adapter is your go-to solution for connecting traditional 3.5mm audio devices to modern USB-C devices without a headph...