Audio

SKU: PI-PPMB00130 | Brand: Pimoroni

The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control w...

SKU: AF-2133 | Brand: Adafruit

The Adafruit Audio FX Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins,...

SKU: AF-3357 | Brand: Adafruit

The Adafruit Music Maker FeatherWing turns any Feather board into a versatile audio player and MIDI synthesiser. Powered by the VS1053B codec chip, it decodes MP3, AAC, Ogg Vorbis, WMA, FLAC, WAV, and MIDI formats, wi...

SKU: AF-1800 | Brand: Adafruit

A solder-on 3.5 mm (1/8") stereo audio plug for building custom audio cables. Made from durable metal with a flexible spring strain relief, it provides a solid, professional-quality connection. Solder your wires to th...

SKU: AF-6250 | Brand: Adafruit

The Adafruit PCM5102 I2S DAC converts digital I2S audio into excellent stereo line-level output through a 3.5mm jack. With an impressive 112dB signal-to-noise ratio and no MCLK or I2C configuration required, simply pi...

SKU: AF-4361 | Brand: Adafruit

Pipe audio in or out of your project with this very handy panel mount audio jack. It's a mono jack with a disconnect pin so you'll get a ground sleeve pin, a left tip pin and a pin that will be disconnected when a jac...

SKU: DF-DFR0498 | Brand: DFRobot

DFRobot FireBeetle series are low power consumption development modules designed for Internet of Things (IoT). The FireBeetle Covers-Camera & Audio Media Board is a multimedia device for IoT that provides interfac...

SKU: AF-1013 | Brand: Adafruit

A 6-foot (~1.8 m) adapter cable that converts a 3.5 mm stereo headphone jack to two colour-coded mono RCA connectors. An essential cable for connecting devices with a headphone or line-out jack to TVs, stereo receiver...

SKU: AF-4066 | Brand: Adafruit

A premium 1-metre stereo audio cable with a distinctive gold metal-wound cover, offering a sleek alternative to standard rubber or ABS cables. Features 3.5 mm (1/8") TRS connectors on both ends. Use this cable to con...

SKU: AF-1780 | Brand: Adafruit

This audio adapter lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with a Teensy 3.2, 3.5 or 3.6. It supports stereo headphone and stereo line-level output, and als...

SKU: SF-DEV-14034 | Brand: SparkFun

The Spectacle Audio Board allows you to add sound from a microSD card to your Spectacle projects. Each board accepts a microSD card with sounds in .ogg format, and has a 1/8" (3.5mm) audio jack line-level output ready...

SKU: DF-FIT0404 | Brand: DFRobot

A 1-metre Y-cable that splits a 3.5 mm stereo signal into two RCA connectors, making it easy to connect phones, tablets, laptops, or media players to home audio systems, amplifiers, and receivers. Most portable devic...

SKU: AF-1799 | Brand: Adafruit

A solder-on 3.5 mm (1/8") TRRS plug for building custom audio cables. Made from durable metal with a flexible spring strain relief, it provides a solid, professional-quality connection. Solder your wires to the four c...

SKU: AF-1801 | Brand: Adafruit

A solder-on 3.5 mm (1/8") stereo audio jack for building custom audio cables and extensions. This is a free-hanging, in-line jack (not panel mount) — made from durable metal with a flexible spring strain relief to pro...

SKU: AF-2791 | Brand: Adafruit

A 3.5 mm (1/8") stereo (TRS) audio jack with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio wiring jigs, breakouts, and test setups. ...

SKU: PI-ADP009 | Brand: Pimoroni

This nifty little USB dongle adds mono audio input and stereo output through USB (1.0). It's a cheap and cheerful solution for audio input to your Raspberry Pi. After testing a wide range of USB audio don...

SKU: PR-PIM483 | Brand: Little Bird

Plug Pirate Audio Line-out for Raspberry Pi into your hi-fi amp or powered speakers, then sit back, relax, and soak in the rich, digital audio. It has a high-quality I2S DAC, high-res colou...

SKU: AF-4182 | Brand: Adafruit

A 3.5 mm mono audio jack cable with alligator clips on the other end, making it easy to clip onto development boards like the BBC micro:bit or Adafruit Circuit Playground. Also compatible with AT (accessibility techno...

SKU: AF-2220 | Brand: Adafruit

The Adafruit Audio FX Sound Board is a standalone audio trigger that plays WAV and OGG Vorbis files — no Arduino or programming required. Simply drag and drop sound files over USB, wire up buttons to the trigger pins,...

SKU: AF-2698 | Brand: Adafruit

A 1-metre 3.5 mm (1/8") male-to-male stereo audio cable for connecting any two devices with standard headphone jacks. Works with smartphones, tablets, MP3 players, car stereos, portable speakers, and audio development...