Audio

SKU: AF-2790 | Brand: Adafruit

A 3.5 mm (1/8") stereo (TRS) audio plug with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio cables, breakouts, and test leads. This ...

SKU: SF-COM-08635 | Brand: SparkFun

Small electret microphone. Useful in acoustic and audio applications. Documents: Datasheet Example Audio LED control project by Adam Greig

SKU: SF-COM-07950 | Brand: SparkFun

This is a small 12mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces.This is not a true piezoelectric speaker but behaves similarly. Inst...

SKU: AF-2915 | Brand: Adafruit

A 3.5 mm (1/8") 4-pole TRRS audio jack with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio wiring jigs, breakouts, and test setups. ...

SKU: SF-DEV-12660 | Brand: SparkFun

The SparkFun MP3 Player Shield is an awesome MP3 decoder with the capabilities of storing music files onto a run-of-the-mill microSD card, thus giving you the ability toadd music or sound effects to any project. Wi...

SKU: DF-DFR0064 | Brand: DFRobot

The DFRobot 386AMP audio amplifier module is based on the LM386 low-voltage audio power amplifier IC. With a fixed voltage gain of 26 dB (20× amplification) and static power consumption of only 24 mW at 6V, it's well ...

SKU: LB-LS6842 | Brand: Little Bird

This compact audio solution pairs the MAX98357 I2S digital amplifier with a high-quality 3W 8Ω 3070 full-range speaker, delivering clear and powerful sound from any I2S-enabled microcontroller. The MAX98357 accepts di...

SKU: DF-SEN0487 | Brand: DFRobot

This tiny MEMS microphone has an amplifier gain of 66. When there is no sound detected, it outputs voltage around 0.66*VCC. When speaking, you can easily get the acoustic waveform by ADC sampling. The module can be us...

SKU: DF-DFR0806 | Brand: DFRobot

With bass and treble tone independent control, this powerful Bluetooth Amplifier has AM interference and filtering function that makes the board THD as low as 0.1% even when working for a long time at large power outp...

SKU: SS-101020023 | Brand: Seeed Studio

The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted b...

SKU: SF-DEV-10587 | Brand: SparkFun

Do you ever wish your Arduino was more musically talented? Or maybe your project could use some cool sound effects. The SparkFun Musical Instrument Shield is an easy way to add great sounding MIDI sound to your next A...

SKU: AF-1935 | Brand: Adafruit

That's one tiny microphone! At about the size of a mature aphid, this wired Electret Microphone is perfect for your FONA. This microphone's very similar to our PCB-mount Elecret Microphone but is significantly sma...

SKU: DF-TEL0108 | Brand: DFRobot

This Bluetooth audio receiver module supports wireless streaming, USB flash drive, and TF (microSD) card playback. It decodes MP3, WMA, WAV, and lossless FLAC audio formats, with a built-in pre-amp output capable of d...

SKU: LB-LS6069 | Brand: Little Bird

This compact enclosed speaker delivers clear audio output at up to 6W with a 4Ω impedance, suitable for a wide range of DIY audio and display projects. It comes with a JST PH 2-pin input cable for easy connection to a...

SKU: SF-CAB-18983 | Brand: SparkFun

A 1-metre TRS (Tip, Ring, Sleeve) audio cable with standard 3.5mm plugs on both ends. Suitable for connecting audio devices, development boards with 3.5mm jacks, and other three-conductor applications. Specifications...

SKU: SF-COM-15350 | Brand: SparkFun

If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.5W, 8Ohm speaker is only 40mm in diameter and just over 4mm thick, the same kind you might find in o...

SKU: PI-IQA002 | Brand: Pimoroni

The IQaudIO Pi-DigiAMP+ is a HAT-compliant DAC and amplifier board for the Raspberry Pi, combining a high-quality 24-bit/192 kHz DAC with a 2×20W Class D stereo amplifier on a single board. Based on the Texas Instrume...

SKU: PI-COM1301 | Brand: Pimoroni

A dual RCA phono connector designed to pair with the Pimoroni pHAT DAC for Raspberry Pi. Simply place it into the landing pads on the PCB and solder for a clean analogue audio output. Key Features Colour-Coded Chan...

SKU: PI-PPMB00130 | Brand: Pimoroni

The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control w...

SKU: TB-XC5191 | Brand: Little Bird

Compact, USB-powered stereo speakers with a space-saving design for laptops and desktop PCs. Powered directly from your computer's USB port — no batteries or plug pack required. Features a separate volume control, pow...