Audio

SKU: LB-LS4380 | Brand: Little Bird

This is an FM Radio Amplifier Mono FM Music Player, designed as a handmade wooden assembly experimental equipment. It features a wooden casing, providing a primitive and rustic design for an FM radio. I...

SKU: DF-DFR0804 | Brand: DFRobot

Does sound quality matter to you? If Yes, then come to take a look at this HIFI Bluetooth Power Amplifier board! With AM interference suppression and filtering function, the board THD can be as low as 0.1% even when w...

SKU: LB-LS0657 | Brand: Little Bird

A high-fidelity DAC expansion board for Raspberry Pi that delivers superior audio quality over the Pi's built-in 3.5mm output. Built around Texas Instruments' PCM5122 DAC chip, this board connects via the I2S interfac...

SKU: LB-LR0240 | Brand: Little Bird

This compact sound module lets a microcontroller detect the presence of loud sounds using its onboard microphone.It is designed for sound detection rather than audio recording or interpretation. An Arduino can read th...

SKU: LB-LS1891 | Brand: Little Bird

HS1891 DAC Module CJMCU-1334 UDA1334A I2S DAC Audio Stereo Decoder Module Board 3.3V - 5V Feature: This fully-featured UDA1334A I2S Stereo DAC breakout is a perfect match for any I2S-output audio interface.&nbsp...

SKU: AF-2914 | Brand: Adafruit

A 3.5 mm (1/8") 4-pole TRRS audio plug with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio cables, breakouts, and test leads. TRRS s...

SKU: SF-COM-11144 | Brand: SparkFun

A ¼″ (6.35mm) stereo audio jack in a right-angle panel-mount configuration. Switched contacts allow you to detect whether a plug is inserted. The jack mounts in an 11mm diameter panel hole and includes a plastic washe...

SKU: DF-FIT0449 | Brand: DFRobot

INTRODUCTION This speaker module is based on the 8002 speaker amplifier IC. It can be used as a buzzer and also play high quality audio. Volume output is controlled via the potentiomet...

SKU: SF-COM-11143 | Brand: SparkFun

This is a simple 3.5mm TRS stereo audio jack with a screw-on plastic shroud. These are great for projects that plug into headphone jacks. Stereo plugs can also be used for carrying serial comm connections!  Th...

SKU: AF-1891 | Brand: Adafruit

Listen up! This 1.5" diameter speaker cone is the perfect addition to any audio project where you need an 8Ω impedance and are using 0.25W of power. The speakers are rated at 0.25W, with a maximum input of 0.5W (pr...

SKU: SF-PRT-08032 | Brand: SparkFun

Low profile 3.5mm stereo audio jack.Documents:Audio 3.5mm Jack Datasheet

SKU: DF-DFR1173 | Brand: DFRobot

This compact voice prompt module integrates an intelligent MP3 playback chip with a 1 W speaker in a tiny 30 × 11 mm package. It supports MP3, WAV, and WMA hardware decoding with 16 MB of on-board storage that retains...

SKU: DF-DFR0719 | Brand: DFRobot

A compact Bluetooth 5.0 audio receiver board that turns any wired speaker into a wireless one. Simply connect power (3.7–24V) and wire up your speaker — pair it with your phone and start streaming music wirelessly. Th...

SKU: DF-DFR0745 | Brand: DFRobot

Wanna buy a simple & practical voice recorder? This one is right for you! The voice recorder module supports 4 controlling modes (Arduino, AT command, on-board buttons, and ADKEY), and multi-segment voice recording. Y...

SKU: SF-COM-09151 | Brand: SparkFun

A compact 0.5W speaker with 8 ohm impedance, small enough to fit inside robot builds, enclosures, and portable electronics projects. Suitable for audio output from amplifier boards, microcontrollers with DAC/PWM audio...

SKU: SF-WIG-13660 | Brand: SparkFun

The WAV Trigger is a unique high-fidelity polyphonic audio player with surprising capabilities. Supporting up to 2048 uncompressed 16-bit, 44.1kHz wav files – the same quality as an audio CD – the WAV Trigger can p...

SKU: SF-DEV-13116 | Brand: SparkFun

The SparkFun Spectrum Shield splits a stereo audio input into 7 frequency bands per channel using two MSGEQ7 graphic equaliser ICs. Read the amplitude of each band via your Arduino's ADC to create sound-reactive proje...

SKU: SF-DEV-12898 | Brand: SparkFun

The SparkFun MIDI Shield board gives your Arduino-based device access to the antiquated, but still widely used and well supported MIDI communication protocol, so you can control synthesizers, sequencers, and other ...

SKU: SF-PRT-12639 | Brand: SparkFun

A 3.5mm TRRS (tip, ring, ring, sleeve) audio jack in a surface-mount package. Unlike standard stereo TRS connectors, TRRS provides three conductors plus ground, allowing it to carry stereo audio along with an addition...

SKU: DF-DFR0034 | Brand: DFRobot

This is a new Arduino compatible Analog Sound Sensor. Sound Sensor is typically used in detecting the loudness in ambient, the Arduino can collect its output signal and actuate accordingly. You may use it to make some...