Audio & Video

SKU: AF-1712 | Brand: Adafruit

A mini class D with AGC and I2C control? Yes please! This incredibly small stereo amplifier is surprisingly powerful. It is able to deliver 2 x 2.8W channels into 4 ohm impedance speakers (@ 10% THD) and it has a i2c ...

SKU: AF-1646 | Brand: Adafruit

This cable will let you swap out the stock 150mm long flex cable from a Raspberry Pi Camera (either 'classic' or 'NoIR' type) or Raspberry Pi Display for a different size. Works great, just carefully open the connecto...

SKU: AF-1645 | Brand: Adafruit

A 50 mm replacement flex cable for the Raspberry Pi Camera (both standard and NoIR versions) and Raspberry Pi Display. Swap out the stock 150 mm cable for a shorter length when you need a compact, tidy installation. ...

SKU: AF-1780 | Brand: Adafruit

This audio adapter lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with a Teensy 3.2, 3.5 or 3.6. It supports stereo headphone and stereo line-level output, and als...

SKU: AF-1729 | Brand: Adafruit

This panel-mount RCA cable provides a clean, permanent composite video or audio connection for enclosures and project boxes. Two RCA connectors (one panel-mount, one plug) are joined by a 264 mm (10.4″) cable, with tw...

SKU: AF-2351 | Brand: Adafruit

These APA102 (DotStar) cool white LEDs feature an integrated driver chip inside each 5050 SMD package, giving you individually addressable brightness control over three cool white (~6000K) dies. The phosphor coating p...

SKU: AF-2571 | Brand: Adafruit

This 50-pin FPC extension board lets you add approximately 22cm of reach to any 50-pin, 0.5mm pitch FPC/FFC connection. The board features two 50-pin flex connectors with a 200mm (20cm) FPC cable included, giving a to...

SKU: AF-2793 | Brand: Adafruit

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid ...

SKU: AF-2792 | Brand: Adafruit

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid ...

SKU: DF-SEN0057 | Brand: DFRobot

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtr...

SKU: AF-2911 | Brand: Adafruit

A 1/4" (6.35 mm) stereo plug with screw terminal connections — no soldering required. Simply insert stranded or solid-core wire into the terminal block and tighten with a small screwdriver to create custom audio wirin...

SKU: SF-COM-13939 | Brand: SparkFun

A piezo alarm with 16 selectable tone patterns configured via on-board DIP switches. Tone options include continuous, chime, intermittent, warble, and pulsating modes. Capable of producing up to 103 dB(A) at 16 V, mak...

SKU: AF-3099 | Brand: Adafruit

Snap, snap! The Camera v2 is the new official camera board released by the Raspberry Pi Foundation! The Raspberry Pi Camera Board v2 is a high quality 8 megapixel Sony IMX219 image sensor custom designed add-on boa...

SKU: AF-3100 | Brand: Adafruit

Snap, snap! The NoIR Camera v2 is the official "night vision" camera board released by the Raspberry Pi Foundation! The Raspberry Pi NoIR Camera Board v2 is a high quality 8 megapixel Sony IMX219 image sensor ...

SKU: DF-SEN0173 | Brand: DFRobot

The camera for Raspberry Pi can be used to take high-definition video, as well as stills photographs. It's easy to use for beginners, but has plenty to offer advanced users if you're looking to expand your knowledg...

SKU: SF-BOB-11044 | Brand: SparkFun

This tiny audio amplifier is based on the Texas Instruments TPA2005D1. Its efficient class-D operation means low heat and long battery life. It can drive an 8-Ohm speaker at up to 1.4 Watts; it won’t shake a stadium, ...

SKU: SF-DEV-11013 | Brand: SparkFun

The LilyPad MP3 Player is an all-in-one audio board combining an Arduino-compatible microcontroller, MP3 decoder, microSD card socket, and stereo amplifier. Part of the LilyPad e-textiles line, it's designed to add mu...

SKU: SF-COM-11025 | Brand: SparkFun

VS1063 is an easy-to-use, versatile encoder, decoder and codec for a multitude of audio formats. They can be hard to get hold of but we’ve got them! The VS1063 contains a high-performance, proprietary, low-power DSP...

SKU: AF-397 | Brand: Adafruit

This camera module can be a pretty neat project addition. It was designed to be used in security systems and does two main things - it outputs NTSC video and can take snapshots of that video (in color) and transmit...

SKU: DF-FIT0404 | Brand: DFRobot

A 1-metre Y-cable that splits a 3.5 mm stereo signal into two RCA connectors, making it easy to connect phones, tablets, laptops, or media players to home audio systems, amplifiers, and receivers. Most portable devic...