All Products

SKU: DF-DFR0146 | Brand: DFRobot

The ETH008 is an 8-channel relay module controlled over Ethernet using TCP/IP commands or a built-in HTTP web interface. Each relay is rated up to 16A and features SPCO (Single Pole Change Over) contacts with normally...

SKU: AF-2633 | Brand: Adafruit

The Adafruit Bluefruit LE SPI Friend adds Bluetooth Low Energy connectivity to any microcontroller with just 4–5 GPIO pins. Using SPI instead of UART means no baud rate configuration or flow control to worry about — c...

SKU: DF-FIT0145 | Brand: DFRobot

A waterproof DC-DC step-down/step-up converter that accepts 8–40V DC input and delivers a stable 12V output at up to 6A (72W). Ideal for powering embedded PCs, single-board computers, and robot electronics from a wide...

SKU: DF-FIT0139 | Brand: DFRobot

These nuts can be used to install your circuit boards, sensors and mechanical mountings. The wide flange at one end with an uneven surface eliminates the need for using extra washers to keep the nut tightly secur...

SKU: AF-2653 | Brand: Adafruit

Get your Particle (formally known as Spark) Photon moving with a PhoBot Robotics shield. No, this is not a robot that makes you a delicious bowl of Vietnamese soup.  Instead, it's a board from Simon Monk ...

SKU: DF-FIT0147 | Brand: DFRobot

This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields.Pins are spaced by 0.1". APPLICATIONS PCB Arduino Shield Header SPECIFICATIONS18.6 x 15.8 x 2.5(mm)(0.73x0.62x0.09") SHIPPING...

SKU: SF-PRT-14411 | Brand: SparkFun

The SparkFun LiPo Charger/Booster is a compact board that charges a single-cell lithium polymer battery and boosts its output to a regulated 5V at up to 1A. Built around the MCP73831 charge controller and PAM2401 boos...

SKU: AF-2591 | Brand: Adafruit

I know you just did a double take when looking at this power supply, what's up with the two cables? Normally you have a switching power supply that plugs into the wall and provides something like 5V or 9V or 12V regul...

SKU: AF-2674 | Brand: Adafruit

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.7" diagonal, and very readable due to the high contrast of an OLED display. This display is mad...

SKU: SF-PRT-14380 | Brand: SparkFun

The SparkFun Adjustable LiPo Charger is a single-cell lithium polymer (LiPo) and lithium ion battery charger. Because it’s adjustable, this charger will be able to safely charge most of our single-cell batteries ...

SKU: AF-2658 | Brand: Adafruit

A set of three SIM card adapters that let you use a single SIM card across devices with different slot sizes. Includes two Nano-to-Standard adapters and one Micro-to-Standard adapter, plus a SIM ejector pin for easy r...

SKU: DF-FIT0106 | Brand: DFRobot

A pack of ten 6-pin female headers with standard 0.1″ (2.54mm) pin spacing. Commonly used for Arduino shield connections and general prototyping. Key Features Standard 0.1″ Pitch – Compatible with breadboards, Ardu...

SKU: AF-2675 | Brand: Adafruit

If you've been diggin' our monochome OLEDs but need something bigger, this display will delight you. These displays are 2.3" diagonal, and very readable due to the high contrast of an OLED display. This display is mad...

SKU: DF-DFR0162 | Brand: DFRobot

This is Version 2.0 of the Xboard. The main improvement is that it now operates at 5V, making it compatible with most sensors and I2C protocol without the need of a voltage level converter. The XBoard is a...

SKU: DF-DFR0173 | Brand: DFRobot

A low power version of the USB-RLY16 module, the USB-RLY16L is powered solely from the USB bus and provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The relays are SPCO (Single ...

SKU: SF-PRT-14338 | Brand: SparkFun

This isn’t your ordinary power supply. The Global Power Supply is a 15V, 4.34A power device specifically designed to work with the JustBoom Amp HAT for the Raspberry Pi. Additionally, as this is a “global” power su...

SKU: DF-FIT0164 | Brand: DFRobot

This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields. SPECIFICATIONS Pins are spaced by 0.1" Size: 15.58x23.05x2.4mm(0.9x0.6x0.1") (Pins: 15 mm)(Pin...

SKU: SF-COM-14325 | Brand: SparkFun

A basic 125 kHz RFID tag with a unique 40-bit ID, ideal for access control, identification, and automation projects. The tag uses the EM4001 ISO-based RFID IC with Manchester encoding. This blank, smooth, credit-card...

SKU: DF-FIT0008-BE | Brand: DFRobot

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Measures 1.8"x1.4".You also have choices for different colors. S...

SKU: DF-FIT0008-R | Brand: DFRobot

A compact 170-point solderless breadboard with a self-adhesive backing for mounting to project enclosures, robot chassis, or proto shields. The red board measures 46 × 36 mm (1.8 × 1.4″) and is compatible with the Ard...