All Products

SKU: SF-COM-11970 | Brand: SparkFun

This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough, small, panel-mount momentary switch with an illuminated white LED ring. It is a SPDT with 16mm thread...

SKU: SF-COM-11968 | Brand: SparkFun

A heavy-duty, panel-mount momentary pushbutton with an illuminated green LED ring. Built from stainless steel with IP65 weatherproofing, this 16 mm threaded switch is tamper-resistant and designed for demanding enviro...

SKU: SF-COM-07836 | Brand: SparkFun

This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can c...

SKU: AF-2913 | Brand: Adafruit

If you need to connect an RJ45 cable (a.k.a Ethernet) to a board that with an Ethernet Jack - this adapter will come in very handy! No soldering required. Just use a slim screwdriver to open up the terminal blocks,...

SKU: SF-COM-11951 | Brand: SparkFun

A small aluminium control knob with markings that go to eleven. Fits potentiometers with a 6mm shaft diameter using a brass insert with a set screw for secure attachment. Specifications Dimensions – 23.6 × 14.2mm ...

SKU: AF-2975 | Brand: Adafruit

The ultimate companion kit for anyone learning electronics. The Adafruit Parts Pal packs LEDs, resistors, capacitors, transistors, sensors, switches, and prototyping essentials into a handy storage box — everything yo...

SKU: SF-COM-00746 | Brand: SparkFun

A 10 F (farad) supercapacitor rated at 2.5 V. This compact energy storage device can be charged and slowly discharged to power low-current systems for extended periods. Two can be connected in series for 5 F at 5 V. ...

SKU: AF-2800 | Brand: Adafruit

A micro-sized NFC/RFID transponder built around the NXP NTAG203 chip operating at 13.56 MHz. Its tiny, flexible form factor makes it ideal for embedding into rings, wearables, keychains, and other compact devices wher...

SKU: AF-2880 | Brand: Adafruit

This matching cable set includes one 2-pin JST SM plug and one 2-pin JST SM receptacle, each with 16cm leads. The latching connectors provide a solid, compact connection that won't come apart easily, and the polarised...

SKU: SF-DEV-13907 | Brand: SparkFun

The SparkFun ESP32 Thing is a comprehensive development platform for Espressif’s ESP32, their super-charged version of the popular ESP8266. Like the 8266, the ESP32 is a WiFi-compatible microcontroller, but to that...

SKU: SF-COM-00597 | Brand: SparkFun

Surface mount DPDT switch for those tight portable designs. Capable of switching up to 1.2VA (360mA at 3.3V and 240mA at 5V).Documents:Datasheet

SKU: AF-3015 | Brand: Adafruit

This is the Custom Gamepad PCB for the PiGRRL 2 pack! The board is designed for use in portable gaming projects like the PiGRRL 2 but it's basically everything-you-need to make your very own DIY gaming project with...

SKU: SF-PRT-00553 | Brand: SparkFun

A row of right angle male headers - break to fit. 40 pins that can be cut to any size. Used with custom PCBs or general custom headers.

SKU: DF-FIT0253 | Brand: DFRobot

A 7.5 V DC wall adapter power supply with a DC 2.1 mm barrel connector, compatible with the Arduino power jack. The 7.5 V output is well suited for Arduino projects that need more than 5 V but where 12 V may be excess...

SKU: SF-PRT-00548 | Brand: SparkFun

Ever wanted to see what’s on that SIM card? Use these sockets in your next project to interface to any old SIM. 6-Pin standard connection. This is a surface mount socket, but it is large enough that it can be hand sol...

SKU: DF-DFR0250 | Brand: DFRobot

A boost converter module that takes two AA batteries and outputs a stable 5 V supply for your circuits. Built around the TI TPS61032 boost chip, it accepts input voltages from 1.8–4.5 V and delivers up to 5 V @ 1 A — ...

SKU: SF-COM-11840 | Brand: SparkFun

These snap-in plastic LED holders provide a clean, secure way to panel-mount 5 mm LEDs. Simply press the LED into the holder and snap the holder into a 7.5 mm (19/64″) mounting hole — no screws or adhesive required. T...

SKU: AF-2993 | Brand: Adafruit

A tri-colour tower light with red, yellow, and green LED segments plus a built-in buzzer, powered by 12V DC. Each light and the buzzer are independently controlled via separate wires, making it easy to indicate machin...

SKU: SF-SEN-11828 | Brand: SparkFun

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-20LA, a very simpl...

SKU: SF-SEN-11827 | Brand: SparkFun

RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-12LA, a very simpl...