All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Arduino Giga R1 WiFi
SKU: SF-WRL-23319 | Brand: SparkFun
The Arduino GIGA R1 WiFi is a powerful development board built around the STM32H747XI dual-core microcontroller, featuring a Cortex-M7 at 480 MHz and a Cortex-M4 at 240 MHz. With 2 MB flash and 1 MB RAM, it handles de...
Delivered by Thu 9 Jul
SparkFun DataLogger IoT
SKU: SF-DEV-22462 | Brand: SparkFun
The SparkFun DataLogger IoT is a data logger that comes preprogrammed to automatically log GPS and various pressure, humidity, and distance sensors. All without writing a single line of code! The DataLogger automatica...
Delivered by Thu 9 Jul
SparkFun IoT Brushless Motor Driver (ESP32 WROOM, TMC6300)
SKU: SF-ROB-22132 | Brand: SparkFun
The SparkFun IoT Brushless Motor Driver is a powerful, easy-to-use motor driver that can control any 3-phase BLDC with built-in WiFi and Bluetooth® capabilities! However, with our on-board Three Phase Brushless Gimbal...
Delivered by Thu 9 Jul
Useful Sensors Tiny Code Reader
SKU: SF-SEN-23352 | Brand: SparkFun
QR codes are a great way for users to communicate with microcontrollers, whether it’s passing WiFi credentials to set up connectivity or sending personal information to fill out a digital badge. Reading them from a ma...
Delivered by Tue 30 Jun
Arduino GIGA R1 WiFi Development Board
SKU: DF-DFR1056 | Brand: DFRobot
Note: The Arduino GIGA R1 WiFi Development Board is available for pre-order and is expected to be shipped in late September. This Arduino GIGA R1 WiFi Development Board measures only 101 x 53mm and has the same for...
Delivered by Tue 30 Jun
40kg.cm Metal Serial Bus Servo, High Precision And Large Torque, With Programmable 360 Degrees Magnetic Encoder and Brushless Motor
SKU: WS-24702 | Brand: Waveshare
The Waveshare ST3025 is a high-performance metal serial bus servo featuring a brushless motor, steel gearbox, and 360° programmable magnetic encoder. With up to 40 kg·cm of torque at 12V, it is built for demanding rob...
Delivered by Tue 30 Jun
Fermion: MEMS Smoke Gas Detection Sensor (Breakout, 10-1000ppm)
SKU: DF-SEN0570 | Brand: DFRobot
Fermion: MEMS Smoke Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat...
Delivered by Tue 30 Jun
Fermion: MEMS Odor Smell Gas Detection Sensor (Breakout, 0.5-50ppm)
SKU: DF-SEN0571 | Brand: DFRobot
Fermion: MEMS Odor Smell Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal...
Delivered by Thu 9 Jul
Adafruit Metro RP2040
SKU: AF-5786 | Brand: Adafruit
The Adafruit Metro RP2040 brings the Raspberry Pi RP2040 dual-core processor to the standard Metro/UNO shield-compatible form factor. With 16 MB of QSPI flash, a microSD card slot, USB-C, and a rich set of debugging p...
Delivered by Mon 20 Jul
Fermion: MEMS Ammonia NH3 Gas Detection Sensor (Breakout, 1-300ppm)
SKU: DF-SEN0567 | Brand: DFRobot
Fermion: MEMS Ammonia NH3 Gas Detection Sensor employs state-of-the-art micro-electromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minim...
Delivered by Tue 30 Jun
Adafruit Metro ESP32-S3 with 16 MB Flash 8 MB PSRAM
SKU: AF-5500 | Brand: Adafruit
The Adafruit Metro ESP32-S3 brings the powerful dual-core ESP32-S3 to the familiar Metro/UNO shield-compatible form factor. With 16 MB flash, 8 MB PSRAM, and 512 KB SRAM, this board has the memory to handle demanding ...
Delivered by Mon 20 Jul
10 Position Header Connector 0.100" (2.54mm) Through Hole, Right Angle Gold
SKU: LB-732-2865-ND | Brand: Little Bird
A 10-position single-row right-angle header with gold-plated pins at standard 2.54mm (0.1") pitch. Through-hole mounting for PCB soldering, with pins oriented at 90° for horizontal mating with female connectors or jum...
Delivered by Tue 30 Jun
Interface Cable - RP-SMA Male to RP-SMA Female (1M, RG174)
SKU: SF-CAB-22036 | Brand: SparkFun
An RP-SMA (Reverse Polarity Sub-Miniature A) extension cable with male-to-female connectors and RG174 coaxial housing. Ideal for mounting an antenna to the outside of an enclosure while keeping the electronics inside....
Delivered by Thu 9 Jul
Cockatoo - Micro:bit simple screw-terminal breakout
SKU: LB-COCKATOO | Brand: Little Bird
The Cockatoo is a simple screw-terminal breakout board for the BBC micro:bit. Slide your micro:bit into the edge connector and you get secure screw terminal access to pins 0, 1, 2, 3.3V, and GND — no soldering or croc...
Delivered by Tue 30 Jun
Bad Influence Award Lapel Pin
SKU: JU-W-LP244 | Brand: Jubly-Umph
Wear your reputation with pride. This colourful hard enamel lapel pin celebrates those who challenge the status quo and push boundaries — a badge of honour for the proudly unconventional. Beautifully presented on a J...
Delivered by Tue 21 Jul
Interface Cable - RP-SMA Male to RP-SMA Female (25cm, RG174)
SKU: SF-CAB-22037 | Brand: SparkFun
A 25cm RP-SMA male-to-female extension cable with RG174 coaxial housing. Ideal for repositioning an antenna to the outside of an enclosure while keeping your electronics neatly inside, this cable provides a reliable R...
Delivered by Thu 9 Jul
Fucking Legend Lapel Pin
SKU: JU-W-LP246 | Brand: Jubly-Umph
Wear your achievements with pride. This bold lapel pin is a celebration of grit, resilience, and the courage to stand out — because getting where you are wasn't easy, and you've earned every bit of it. Crafted as a l...
Delivered by Tue 30 Jun
GNSS Multi-Band L1/L2/L5 Surveying Antenna - TNC (SPK6618H)
SKU: SF-GPS-21801 | Brand: SparkFun
The SPK6618H is the latest advancement in GNSS antenna technology allowing tri-band (L1/L2/L5) reception for GPS, GLONASS, Galileo, and BeiDou constellations. These 'UFO' antennas have incredible performance for the m...
Delivered by Thu 9 Jul
SparkFun Brushless Motor Driver - 3-Phase (TMC6300)
SKU: SF-ROB-21867 | Brand: SparkFun
The SparkFun 3-Phase Brushless Motor Driver, featuring the TMC6300 from ADI + Trinamic, is a powerful and easy-to-use three-phase motor driver that was designed to control our Brushless Gimbal Motor. It can be used...
Delivered by Thu 9 Jul
IT'S ALL GOING TO BE OKAY LAPEL PIN
SKU: JU-W-LP182 | Brand: Jubly-Umph
A colourful reminder that everything is going to work out. This limited edition hard enamel lapel pin from Jubly-Umph features a gold-backed finish and comes beautifully presented on a branded backing card. Pin it to...
Delivered by Tue 30 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
