All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
High Brightness Pink Electroluminescent (EL) Wire - 2.5 meters [High brightness, long life]
SKU: AF-404 | Brand: Adafruit
EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. You c...
Out of stock
Illuminated Toggle Switch with Cover - Yellow
SKU: AF-3219 | Brand: Adafruit
Fire up your engines because these are the hot-rods of toggle switches! Equipped with an aerodynamic yellow protective casing, and a yellow LED at the tip of the switch, this Yellow LED Toggle Switch is sure ...
Out of stock
Hydrogen Gas Sensor - MQ-8
SKU: SF-SEN-10916 | Brand: SparkFun
This is a simple-to-use hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air. The MQ-8 can detect hydrogen gas concentrations anywhere from 100-10000ppm. This sensor has a high sensitivity an...
Out of stock
0.100 (2.54 mm) Shorting Block: Black, Top Closed
SKU: PL-970 | Brand: Pololu
The 0.100″ (2.54 mm) Shorting Block is a removable jumper with a closed-top black housing, designed to bridge two adjacent pins on a standard 0.1″ pitch male header. Shorting blocks are essential for configuring hardw...
Out of stock
0.100 (2.54 mm) Shorting Block: Blue, Top Closed
SKU: PL-968 | Brand: Pololu
The 0.100″ (2.54 mm) Shorting Block is a removable jumper with a closed-top blue housing, designed to bridge two adjacent pins on a standard 0.1″ pitch male header. Shorting blocks are essential for configuring hardwa...
Out of stock
Basic 16x2 Character LCD - RGB Backlight 5V
SKU: SF-LCD-10862 | Brand: SparkFun
This is similar to other 16x2 character LCDs that you’ve seen before but with one vibrant difference: The backlight is actually an RGB LED. This means that you can change the backlight of this display to any color ...
Out of stock
820pF 50VDC Ceramic Capacitors - Pack of 2
SKU: TB-RC5335 | Brand: Little Bird
A pack of 2 general-purpose ceramic disc capacitors rated at 820 pF and 50VDC. Ceramic capacitors are non-polarised and suitable for a wide range of applications including decoupling, filtering, and timing circuits. ...
Out of stock
12 eTape Liquid Level Sensor + extras
SKU: AF-464 | Brand: Adafruit
The eTape Liquid Level Sensor is a solid-state resistive sensor that measures fluid level without mechanical floats. As the liquid level rises, the hydrostatic pressure compresses the sensor envelope, decreasing its r...
Out of stock
SparkFun Decade Resistance Box
SKU: SF-KIT-13006 | Brand: SparkFun
This is the SparkFun Decade Resistance Box, an involved PTH soldering kit that allows you to quickly and accurately dial in a specific resistance value between 0 and 999,990 Ω, in 10 Ω increments. The concept is simpl...
Out of stock
SparkFun IR Thermometer Evaluation Board - MLX90614
SKU: SF-SEN-10740 | Brand: SparkFun
An evaluation board for the MLX90614 non-contact infrared thermometer sensor. It pairs the MLX90614 with an ATmega328 running at 3.3 V (8 MHz Arduino bootloader), giving you a ready-to-use IR temperature sensor with s...
Out of stock
TFT FeatherWing - 2.4 320x240 Touchscreen For All Feathers
SKU: AF-3315 | Brand: Adafruit
A 2.4" TFT touchscreen display shield for the Adafruit Feather ecosystem. Featuring a 320×240 pixel display with 16-bit colour, a resistive touchscreen, and a built-in microSD card slot, this FeatherWing adds a full i...
Out of stock
Adafruit Metro Starter Pack
SKU: AF-3345 | Brand: Adafruit
The Adafruit Metro Starter Pack is the perfect beginner kit for learning electronics and Arduino programming. Built around the Adafruit Metro 328 (ATmega328-based, Arduino UNO R3-compatible), this pack includes everyt...
Out of stock
Raspberry Pi Arcade Cabinet Pack
SKU: AF-3272 | Brand: Adafruit
Couldn't get one of those Nintendo Mini Classic consoles? No problem, we've got you covered with this no-solder no-tools required kit! Video games are one of the most popular applications for the Raspberry Pi (a...
Out of stock
Raspberry Pi DIY Camera Pack
SKU: AF-3275 | Brand: Adafruit
If the holidays promise anything, it’s almost certainly a deluge of photographs. Instead of taking out your smartphones, why not build your own camera? With one of Adafruit’s best selling screens and an official...
Out of stock
SparkFun Sunny Buddy - MPPT Solar Charger
SKU: SF-PRT-12885 | Brand: SparkFun
This is the Sunny Buddy, a maximum power point tracking (MPPT) solar charger for single-cell LiPo batteries. This MPPT solar charger provide you with the ability to get the most possible power out of your solar panel ...
Out of stock
DFRobot Maker T-shirt (L)
SKU: DF-DWG0006-L | Brand: DFRobot
INTRODUCTION A stylish imprint T-Shirt featured with DFRobot's special maker design, 100% cotton. One of DFRobot must-haves! SPECIFICATION ...
Out of stock
Interface Cable - SMA Female to SMA Male (25cm)
SKU: SF-WRL-12861 | Brand: SparkFun
This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough...
Out of stock
LED Tactile Button Breakout
SKU: SF-BOB-10467 | Brand: SparkFun
This simple breakout board makes it easy to use our LED tactile switches in a breadboard, or your next project. Note: Populate the board according to the polarity of the LED on the switch. The markings for the swi...
Out of stock
Standoffs Plastic (4-40; 3/8; 10 pack)
SKU: SF-PRT-10461 | Brand: SparkFun
These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. Each standoff has an outer diameter of 6mm. Sold in pack...
Out of stock
Arduino Uno R3 (Atmega328 - assembled)
SKU: AF-50 | Brand: Adafruit
We sure love the ATmega328 here at Adafruit, and we use them a lot for our own projects. The processor has plenty of GPIO, Analog inputs, hardware UART SPI and I2C, timers and PWM galore - just enough for most...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
