All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
LCD Shield Kit w/ 16x2 Character Display - Only 2 pins used! [BLUE AND WHITE]
SKU: AF-772 | Brand: Adafruit
This new Adafruit shield makes it easy to use a 16x2 Character LCD. We really like the Blue & White 16x2 LCDs we stock in the shop. Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LC...
Out of stock
Wires with Pre-crimped Terminals 10-Pack F-F 6 Gray
SKU: PL-1818 | Brand: Pololu
These premium wires are stranded 26 AWG wires with female terminals on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54mm) connectors. Thes...
Out of stock
Battery Capacity Indicator
SKU: DF-FIT0466 | Brand: DFRobot
INTRODUCTION Sometimes battery information is not readily available or is hard to understand at a glance. Our Battery Capacity Indicator is a user friendly indicator interface that you can use in your project...
Out of stock
Adafruit PN532 NFC/RFID Controller Shield for Arduino + Extras
SKU: AF-789 | Brand: Adafruit
The Adafruit PN532 NFC/RFID Controller Shield brings 13.56 MHz NFC and RFID capabilities to your Arduino. Built around the PN532 chipset — the most widely used NFC controller, found in virtually every NFC-enabled phon...
Out of stock
Wires with Pre-crimped Terminals 50-Piece Rainbow Assortment M-F 12
SKU: PL-1804 | Brand: Pololu
These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables w...
Out of stock
0.96 Inch OLED Display Module For Raspberry Pi
SKU: DF-DFR0413 | Brand: DFRobot
This 0.96″ 128×64 OLED Display Module is designed for Raspberry Pi projects where a compact, low-power screen is needed to show system information such as IP addresses, CPU temperature, and status messages. The SSD130...
Out of stock
3-Pin Female JST PH-Style Cable (30 cm) with Female Pins for 0.1 Housings
SKU: PL-1798 | Brand: Pololu
A 30 cm (12-inch) adapter cable with a 3-pin female JST PH-style connector on one end and individual female pins for 0.1" housings on the other. Designed to connect Sharp analog distance sensors to breadboards, microc...
Out of stock
APC220 Radio Communication Module
SKU: DF-TEL0005 | Brand: DFRobot
The APC220 Radio Communication Module provides a simple, economical solution for wireless data communication. With an embedded high-speed microprocessor and transparent UART/TTL interface, it eliminates the need for p...
Out of stock
NeoPixel Nano 2427 RGB LEDs w/ Integrated Driver Chip - 10 Pack
SKU: AF-3484 | Brand: Adafruit
Ultra-compact NeoPixel RGB LEDs in a tiny 2427 package (2.4 × 2.7 mm) — half the size of 3535 Mini NeoPixels and a quarter the size of standard 5050 NeoPixels. Each LED contains red, green, and blue elements with an i...
Out of stock
DRV8838 Single Brushed DC Motor Driver Carrier
SKU: PL-2990 | Brand: Pololu
Overview DRV8838 Single Brushed DC Motor Driver Carrier, bottom view with dimensions. TI SN754410 (16-pin DIP) next to the #2135 DRV8835 carrier (14-pin DIP) and #2990 DRV8838 carrier (10-pin DIP) for size re...
Out of stock
Electrical Engineering 101 - (3rd Edition)
SKU: SF-BOK-09458 | Brand: SparkFun
Everything you should have learned in school, but probably didn’t! This book is great for electronics newbies, or if you just need a refresher course. Topics ranging from Ohm’s law to proper usage of an oscilloscope t...
Out of stock
Adafruit 0.56 4-Digit 7-Segment Display w/I2C Backpack - Blue
SKU: AF-881 | Brand: Adafruit
The Adafruit 0.56" 4-Digit 7-Segment Display with I2C Backpack in blue makes it easy to add a bright numeric display to any microcontroller project. The backpack handles all LED multiplexing and driving via I2C, so yo...
Out of stock
Insulated Silicone Rework Mat - 34cm x 23cm x 4mm Work Surface
SKU: AF-3536 | Brand: Adafruit
This silicone mat is made of 4mm thick rubber and can take just about anything you throw at it. It's stable, strong, non-slip, non-conductive and heat-resistant surface for your workstation. We love it here at Adafrui...
Out of stock
Thumb Slide Joystick
SKU: SF-COM-09426 | Brand: SparkFun
A compact resistive analog joystick similar to those found on the PSP1000. Unlike traditional thumbstick joysticks, this one has a distinctive flat "slide" feel with a removable rubber thumb pad. Connect to an Arduin...
Out of stock
Adafruit MetroX Classic Kit - Experimentation Kit for Metro
SKU: AF-3588 | Brand: Adafruit
The Adafruit MetroX Classic Kit is a comprehensive experimentation kit with over 20 guided circuits and projects to explore microcontroller basics. Built around the Adafruit Metro 328 (Arduino UNO-compatible), this ki...
Out of stock
Metro M4 Express
SKU: AF-3382 | Brand: Adafruit
Are you ready? Really ready? Cause here comes the fastest, most powerful Metro ever. The Adafruit Metro M4 featuring the Microchip ATSAMD51. This Metro is like a bullet train, with it's 120MHz Cortex M4 with floating ...
Out of stock
ALL TERRAIN Multi Function Tracked Robot
SKU: TB-KJ8918 | Brand: Little Bird
Build your own multi-function tracked robot with this comprehensive mechanical assembly kit. Featuring six independent tractor-crawlers (three per side), this all-terrain platform can be reconfigured into multiple mod...
Out of stock
BLE Expansion for Onion Omega2
SKU: ON-BLEEXP | Brand: Little Bird
Add Bluetooth 4.1 connectivity to your Onion Omega2 with this USB-based BLE expansion. Connect to smartphones, tablets, and other Bluetooth Low Energy devices for wireless communication and control. The expansion plu...
Out of stock
Addressable Through-Hole 5mm RGB LED with Diffused Lens, WS2811 Driver (10-Pack)
SKU: PL-2535 | Brand: Pololu
A pack of 10 addressable RGB LEDs in a familiar 5mm through-hole form factor. Each LED contains an integrated WS2811 driver, allowing you to control the colour of every LED individually using just one microcontroller ...
Out of stock
Panel Mount USB Cable - USB A Plug to USB A Right Angle Socket
Brand: Little Bird
This handy USB extension cable will make it easy to enclose a device with an A-type (USB host) port. We think this would be most handy when putting a Beagle Bone, Raspberry Pi, or Mintyboost into a box.The jack half h...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared