All Products

SKU: AF-2298 | Brand: Adafruit

Is this not the cutest little display for the Raspberry Pi? It features a 2.8" display with 320x240 16-bit color pixels and a resistive touch overlay. The plate uses the high speed SPI interface on the Pi and ...

SKU: SF-SEN-08679 | Brand: SparkFun

A thin, flexible membrane potentiometer that senses finger or stylus position along a 200 mm strip. Pressing anywhere on the strip varies resistance linearly from 100 Ω to 10 kΩ, providing accurate positional data for...

SKU: TB-ZV1634 | Brand: Little Bird

The MC78T12 is a positive linear voltage regulator in a TO-220 package, providing a fixed 12 V output at up to 3 A. It accepts an input voltage range of 12–35 V and includes built-in thermal overload and short-circuit...

SKU: TB-XC4472 | Brand: Little Bird

This versatile motor and servo controller shield for Arduino drives up to 4 bidirectional DC motors or 2 stepper motors, plus 2 servos — all from a single board. The 4 onboard H-bridges provide 0.6A per channel (1.2A ...

SKU: TB-XC4488 | Brand: Little Bird

This MOSFET driver module lets you control high-power 24V DC loads from an Arduino or other 3.3V/5V microcontroller. It accepts PWM input for variable speed or brightness control, making it ideal for driving DC motors...

SKU: SF-KIT-13927 | Brand: SparkFun

The LilyPad Sewable Electronics Kit is an introduction to the world of e-textiles and electronic sewing. Through a series of guided projects, you'll learn to sew basic circuits, light up LEDs, control them with button...

SKU: SF-TOL-11952 | Brand: SparkFun

These are our new and improved flush cutters, giving you a way to cut leads very cleanly and close to the solder joint. Diagonal cutters are good, but if you really need to get up close and personal, flush cutters are...

SKU: AF-9 | Brand: Adafruit

Yow! These things are super powerful. 1/2" diameter, 3/16" thick discs, south side is marked with a red line. Great for use with your SpokePOV Kit. If you have an aluminium frame, use tape/foamstickytape to attach it.

SKU: PL-1131 | Brand: Pololu

This small digital distance sensor detects objects between 0.5 cm and 5 cm (0.2″ and 2″) away. With its quick response time, small size, low current draw, and short minimum sensing distance, this sensor is a...

SKU: PL-1105 | Brand: Pololu

A powerful brushed DC motor with a 70:1 metal gearbox, designed for operation at 12V. The unit features a 16mm-long, 6mm-diameter D-shaped output shaft, suitable for robotics and mechanical projects requiring high tor...

SKU: PL-2098 | Brand: Pololu

The Pololu D24V3F5 is a compact buck (step-down) switching voltage regulator that converts input voltages up to 42 V down to a fixed 5 V output. With a typical efficiency of 80–90%, it significantly outperforms linear...

SKU: SF-DEV-13298 | Brand: SparkFun

The Touch Board from Bare Conductive is an easy-to-use Arduino@Heart board that gives you the ability to turn almost any material or surface into a sensor. Each Touch Board offers 12 electrodes for your a conductiv...

SKU: PL-1024 | Brand: Pololu

The 0.100″ (2.54 mm) 2×4-Pin Straight Female Header is a double-row, 8-pin socket strip designed to mate with standard 0.1″ pitch male headers. Its compact dual-row footprint is commonly used for small bus connections...

SKU: PL-1014 | Brand: Pololu

This single-row, 4-pin straight female header with 0.1" (2.54mm) pitch is designed to mate with standard 0.1" male headers. It provides a reliable socket connection for board-to-board and board-to-wire applications. ...

SKU: AF-380 | Brand: Adafruit

These are the highest quality & capacity batteries, the same as shipped with the iCufflinks, iNecklace, Datalogging and GPS Shields, GPS HAT, etc. One battery per order (you'll want one battery per cufflink or pe...

SKU: PL-973 | Brand: Pololu

A 20" (50 cm) 16-conductor ribbon cable with IDC connectors on both ends. Ideal for connecting to 16-pin character LCDs, shrouded box headers, and other 2×8 pin interfaces in electronics projects. Specifications Co...

SKU: TB-PP2008 | Brand: Little Bird

 Lighter plug has 5A 3AG fast blow fuse and red power indicator LED. Specifications  | Cable Length  |  1.5m | Diameter  |  2.1mm

SKU: PL-1964 | Brand: Pololu

This #4-40, pan-head screw is 1 1/4″ (1.25″) long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: PL-1952 | Brand: Pololu

Hexagonal male-female aluminium standoffs designed specifically for the Raspberry Pi. The 11mm spacing is the ideal height for mounting expansion boards with standard-size female headers, and the M2.5 threads fit the ...

SKU: AF-492 | Brand: Adafruit

A button is a button, and a switch is a switch, but this LED illuminated arcade buttons is in a class of its own. Its the same size as a 'standard' 30mm arcade but has a built in LED that can be controlled separately ...