All Products

SKU: PL-1920 | Brand: Pololu

These 1×16-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable multi-wire c...

SKU: AF-445 | Brand: Adafruit

EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide (the plastic coating is about 1.5cm wide). The othe...

SKU: SF-BOB-12886 | Brand: SparkFun

If you aren’t familiar with the Electric Imp, it essentially provides an easy, integrated way to connect almost any hardware device both to other devices and to internet services. The SparkFun Electric Imp Breako...

SKU: DF-FIT0419 | Brand: DFRobot

INTRODUCTION This is a new micro DC geared motor, using planetary gear mechanism, applicable to the various types of DIY project. Especially the project which has a certain requirements for ...

SKU: AF-447 | Brand: Adafruit

EL tape is the big sister to EL wire - it has the same glow effect but with a flat, wide shape instead of a round shape. The glowing part of the tape is 1 cm wide (the plastic coating is about 1.5cm wide). The othe...

SKU: SF-PRT-10550 | Brand: SparkFun

BNC connectors are ideal for quick connects to audio coax and high-frequency signal lines. This is a right-angle connector and comes with a lock washer and nut. Documents: Dimensional Drawing

SKU: AF-3337 | Brand: Adafruit

Learning to invent is fast and fun with no code-typing or circuit-soldering to slow things down. The BlocklyProp Starter Kit has all the hardware required to fully learn the Parallax’s Blockly visual programming to...

SKU: AF-564 | Brand: Adafruit

A small, portable inverter for EL wire. Powers off of 4 AAA batteries (not included!), it can drive 3-4 meters (10 to 13 feet) of our high-brightness EL wire OR 1 meter (3 feet) of EL tape OR a 10cmx10cm piece of E...

SKU: SF-WRL-10534 | Brand: SparkFun

A simple 434 MHz ASK RF transmitter module for creating basic one-way wireless data links. Breadboard-friendly and easy to pair with a microcontroller, this transmitter works with compatible 434 MHz receiver modules t...

SKU: SF-WRL-10532 | Brand: SparkFun

The RF Link Receiver is a simple 434 MHz wireless receiver module designed for one-way data communication with a compatible 434 MHz transmitter. It fits easily into a breadboard and pairs with microcontrollers to crea...

SKU: PL-1915 | Brand: Pololu

These 2×7-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable fourteen-wire...

SKU: SF-TOL-12878 | Brand: SparkFun

This is 50g of high quality, Lead-Free Solder Paste, the perfect amount to keep around for prototyping and hobby projects that require a bit of SMD soldering. Solder Paste Stenciling is the easiest and quickest way t...

SKU: SF-BOB-10496 | Brand: SparkFun

This is a breakout board to allow simple access to the tightly pitched pins on the GS406 and GS407 GPS units. This board breaks out all of the necessary pins to a row of standard 0.1" spaced header to allow for easy b...

SKU: AF-3354 | Brand: Adafruit

The Rainbow HAT from Pimoroni has a buffet of sensors, inputs, and displays to explore Android Things™. Use it as a weather station, a clock, a timer or stopwatch, a mood light, or endless other things.Pimoroni collab...

SKU: AF-3341 | Brand: Adafruit

These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They're mini versions of the ones in our digital DotStart strips and matrices wi...

SKU: SF-WRL-12861 | Brand: SparkFun

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough...

SKU: DF-SEN0188 | Brand: DFRobot

INTRODUCTION This is an Arduino compatible fingerprint module. With the high speed DSP processor, it could also work with other serial device, like MSP430, 51, AVR, PIC, STM32, ARM and FPGA ...

SKU: SF-WRL-12847 | Brand: SparkFun

XBee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the SparkFun XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino...

SKU: AF-3227 | Brand: Adafruit

Welcome to the Internet of Things with Google! Whether you are a device creator prototyping a new design for production, or a hobbyist looking for an introduction to the new Android Things API, you've come to th...

SKU: PL-1908 | Brand: Pololu

These 1×9-pin crimp connector housings let you quickly build custom cables that mate with standard 0.1" (2.54mm) spaced connectors. Pair them with pre-crimped terminal wires to create reliable, removable nine-wire con...