All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Crystal 10MHz
SKU: SF-COM-00535 | Brand: SparkFun
Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability. Low profile HC49/US Package.
Delivered by Tue 14 Jul
SparkFun Infrared Temperature Breakout - TMP006
SKU: SF-SEN-11859 | Brand: SparkFun
This is not your typical temperature sensor. The TMP006 Breakout can measure the temperature of an object without making contact with it. By using a thermopile to detect and absorb the infrared energy an object is emi...
Delivered by Tue 14 Jul
RGB LED Satellite Module 004 (Circle)
SKU: PL-1245 | Brand: Pololu
The Satellite Module 003 is an RGB LED round “pixel” with three bright surface-mount RGB LEDs. This LED module is designed to be used with the OctoBrite DEFILIPPI to easily integrate full-color LED lighting into your...
Delivered by Tue 14 Jul
Servo Y extension cable (500mm)
SKU: DF-FIT0335 | Brand: DFRobot
This 500 mm Y-cable is typically used to connect two servos to a single servo port on an RC receiver or servo controller. It has a single female JR connector connected to two male JR connectors, which means it is c...
Delivered by Thu 23 Jul
6x1 F-F 12 Cable for ShiftBrites and ShiftBars
SKU: PL-1239 | Brand: Pololu
A 300mm (12") six-conductor female-to-female cable designed for chaining ShiftBrite and ShiftBar LED modules. The cable wires are colour-coded to match the ShiftBrite pinout, with black for ground and red for power. ...
Delivered by Tue 14 Jul
ShiftBar
SKU: PL-1242 | Brand: Pololu
The ShiftBar is a medium-power RGB LED controller featuring 10-bit digital brightness control on each color channel (over one billion colors). Multiple ShiftBar modules can be chained together and controlled from a si...
Delivered by Tue 14 Jul
2.7 OLED 12864 Display Module
SKU: DF-FIT0328 | Brand: DFRobot
A 2.7" white OLED display module with 128×64 pixel resolution, driven by the SSD1325 controller. The OLED technology delivers deep blacks, wide viewing angles, and a slim profile — with no backlight required, the disp...
Delivered by Tue 14 Jul
Resistor 1.0M Ohm 1/4 Watt PTH
SKU: SF-COM-11853 | Brand: SparkFun
1.0M Ohm, ¼th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards.We’ve opted for a new and more breadboard-friendly lead thickness (they’re a bit thicker than our last ones). Note: ...
Delivered by Thu 23 Jul
10-piece Hot Air Rework Soldering Nozzle Kit
SKU: AF-3596 | Brand: Adafruit
A set of 10 hot air rework nozzles for surface-mount soldering repair. The kit includes five round nozzles in various diameters for general-purpose work, plus five specialty nozzles designed for removing and reworking...
Delivered by Thu 6 Aug
USB Cable A to B - 6 Foot
SKU: SF-CAB-00512 | Brand: SparkFun
This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. Compatible with most SFE designed USB boards as well as USB Arduino bo...
Delivered by Thu 23 Jul
USB-to-Serial Bridge - µUSB-PA5
SKU: SF-DEV-11814 | Brand: SparkFun
The µUSB-PA5 is a compact USB-to-Serial TTL UART bridge based on the FTDI FT232RQ. It connects to your PC via a Mini-B USB connector and provides serial communication at baud rates up to 3 Mbps — designed primarily fo...
Delivered by Tue 14 Jul
SparkFun Picoboard Starter Kit
SKU: SF-KIT-13863 | Brand: SparkFun
The SparkFun PicoBoard Starter Kit is your go-to source to begin learning everything about the SparkFun PicoBoard and the Scratch programming environment. This kit includes your very own PicoBoard, multiple pieces ...
Delivered by Tue 14 Jul
Banana to IC Hook Cables
SKU: SF-CAB-00506 | Brand: SparkFun
These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pairs.Dimensions: 36" Long
Delivered by Thu 23 Jul
Solar Panel (9v 220mA)
SKU: DF-FIT0330 | Brand: DFRobot
Need a clean energy source for your project? Check out this compact,high quality,high output endurable solar panel.The peak power output is around 9V at 220mA.Can also be used in series to work as recharger for 12V b...
Delivered by Thu 23 Jul
Rubber Wheel 136x24mm (Kit)
SKU: DF-KIT0044 | Brand: DFRobot
This is a DFRobot designed black rubber wheel kit. The custom-designed kit contains two 136mm rubber tires tested over 6 indoor conditions,packed with shaft couplings, two M8 screws and 2 washers. Designed to fi...
Delivered by Thu 23 Jul
20x4 Character LCD with LED Backlight (Parallel Interface), White on Blue
SKU: PL-1219 | Brand: Pololu
This white-on-blue 20×4 character LCD adds a clear, easy-to-read display to your electronics projects. With four rows of 20 characters, it provides plenty of space for sensor readings, menus, status messages, and more...
Delivered by Tue 14 Jul
Raspberry Pi 3 - Model B - ARMv8 with 1G RAM
SKU: AF-3055 | Brand: Adafruit
Did you really think the Raspberry Pi would stop getting better? At this point, we sound like a broken record, extolling on the new Pi’s myriad improvements like we’re surprised that the folks at the Raspberry P...
Delivered by Thu 6 Aug
Adafruit Mini Skinny NeoPixel Digital RGB LED Strip - 30 LED/m [BLACK]
SKU: AF-2954 | Brand: Adafruit
The Mini Skinny NeoPixel strip features 30 individually addressable RGB LEDs per metre on an ultra-narrow 7.5 mm wide flexible PCB (5 mm without casing). This is the black PCB version — the lowest density option in th...
Delivered by Thu 6 Aug
Gravity: Analog Adjustable Infrared Sensor Switch (50cm)
SKU: DF-SEN0164 | Brand: DFRobot
This adjustable infrared sensor features a high-sensitivity photoreflector to perform distance detection function,ranging from 3cm to 50cm. When the infrared light emitted by the emitter gets reflected on a surface...
Delivered by Tue 14 Jul
SparkFun SOIC to DIP Adapter - 28-Pin
SKU: SF-BOB-00496 | Brand: SparkFun
The SparkFun SOIC to DIP Adapter converts 28-pin SOIC surface-mount packages to standard 0.1" through-hole headers, making it easy to prototype with SMD ICs on breadboards or in DIP sockets. Key Features 28-Pin SOI...
Delivered by Tue 14 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
