All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
LED Voltage Meter (Green)
SKU: DF-DFR0130-G | Brand: DFRobot
This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading st...
Delivered by Wed 22 Jul
LED Voltage Meter (Red)
SKU: DF-DFR0130-R | Brand: DFRobot
This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading st...
Delivered by Mon 13 Jul
Bionic Robot Hand (Right)
SKU: DF-ROB0143 | Brand: DFRobot
The bionic robot hand is made up of acrylic material. It consists of 5 micro metal servos, joints and one hand base. The special mechanical structure makes every finger can be controlled separately, all can move in c...
Delivered by Wed 22 Jul
FireBeetle ESP8266 IOT Microcontroller (Supports Wi-Fi)
SKU: DF-DFR0489 | Brand: DFRobot
DFRobot FireBeetle is a series of low-power-consumption development hardware designed for Internet of Things (IoT). Firebeetle ESP8266 is a development board integrated with IoT WiFi, TCP/IP, 32-bit MCU, 10-bit ADC an...
Delivered by Mon 13 Jul
Digital piranha LED module-Yellow
SKU: DF-DFR0031-Y | Brand: DFRobot
The Digital Piranha LED Module (Yellow) is a bright LED module designed for Arduino and compatible microcontroller boards. Control it via a digital pin (LOW = on, HIGH = off) or use PWM output to adjust brightness for...
Delivered by Mon 13 Jul
99:1 Metal Gearmotor 25Dx54L mm LP 6V
SKU: PL-1587 | Brand: Pololu
A low-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gearb...
Delivered by Mon 13 Jul
Rainbow LED Ring V3 (Arduino Compatible)
SKU: DF-DFR0141 | Brand: DFRobot
The Rainbow LED Ring V3 features 12 individually addressable SMD RGB LEDs arranged in a ring, each controllable for brightness and colour. It comes with a pre-loaded bootloader containing several built-in LED animatio...
Delivered by Mon 13 Jul
Flora Sewable 3-Pin JST Wiring Adapter
SKU: AF-2566 | Brand: Adafruit
This product's about as simple as a cup of lemonade on a hot summer day. And, like lemonade, it's just three components! This board is a sewable adapter with a 3-pin JST wiring adapter. It's a perf...
Delivered by Wed 5 Aug
Gravity:Digital RED LED Light Module
SKU: DF-DFR0021-R | Brand: DFRobot
A simple red LED module with a Gravity 3-pin digital interface for plug-and-play connection to Arduino and other microcontrollers via a Gravity IO Expansion Shield. Ideal for beginners learning digital output control....
Delivered by Mon 13 Jul
Flexible 16x16 NeoPixel RGB LED Matrix
SKU: AF-2547 | Brand: Adafruit
For advanced NeoPixel fans, we now have a bendable, Flexible 16x16 NeoPixel LED Matrix! Control all 256 ultra-bright LEDs using a single microcontroller pin, set each LED as you wish to scroll messages or draw litt...
Delivered by Wed 5 Aug
Ethernet Controlled 8 Channel Relay 16A
SKU: DF-DFR0146 | Brand: DFRobot
The ETH008 is an 8-channel relay module controlled over Ethernet using TCP/IP commands or a built-in HTTP web interface. Each relay is rated up to 16A and features SPCO (Single Pole Change Over) contacts with normally...
Delivered by Wed 22 Jul
Adafruit Bluefruit LE SPI Friend - Bluetooth Low Energy (BLE)
SKU: AF-2633 | Brand: Adafruit
The Adafruit Bluefruit LE SPI Friend adds Bluetooth Low Energy connectivity to any microcontroller with just 4–5 GPIO pins. Using SPI instead of UART means no baud rate configuration or flow control to worry about — c...
Delivered by Wed 5 Aug
72W DC-DC Converter 12V@6A
SKU: DF-FIT0145 | Brand: DFRobot
A waterproof DC-DC step-down/step-up converter that accepts 8–40V DC input and delivers a stable 12V output at up to 6A (72W). Ideal for powering embedded PCs, single-board computers, and robot electronics from a wide...
Delivered by Wed 22 Jul
99:1 Metal Gearmotor 25Dx54L mm HP 6V
SKU: PL-1576 | Brand: Pololu
A high-power 6V brushed DC gearmotor with a 98.78:1 metal spur gearbox. The cylindrical motor body measures just under 25mm in diameter, and the D-shaped output shaft is 4mm in diameter, extending 12.5mm from the gear...
Delivered by Mon 13 Jul
Pololu Basic SPDT Relay Carrier with 5VDC Relay (Partial Kit)
SKU: PL-2481 | Brand: Pololu
The Pololu basic relay carrier modules allow simple control of a single-pole, double-throw (SPDT) switch from low-voltage, low-current control signals. This item includes the basic carrier PCB along with an Omron G5L...
Delivered by Mon 13 Jul
Flange Nuts
SKU: DF-FIT0139 | Brand: DFRobot
These nuts can be used to install your circuit boards, sensors and mechanical mountings. The wide flange at one end with an uneven surface eliminates the need for using extra washers to keep the nut tightly secur...
Delivered by Mon 13 Jul
PhoBot - Robotics Shield for Photon
SKU: AF-2653 | Brand: Adafruit
Get your Particle (formally known as Spark) Photon moving with a PhoBot Robotics shield. No, this is not a robot that makes you a delicious bowl of Vietnamese soup. Instead, it's a board from Simon Monk ...
Delivered by Wed 5 Aug
Stackable Header - 6 Pin
SKU: DF-FIT0147 | Brand: DFRobot
This is a 6-pin female header, with extra long legs -- great for stacking Arduino shields.Pins are spaced by 0.1". APPLICATIONS PCB Arduino Shield Header SPECIFICATIONS18.6 x 15.8 x 2.5(mm)(0.73x0.62x0.09") SHIPPING...
Delivered by Wed 22 Jul
SparkFun LiPo Charger/Booster - 5V/1A
SKU: SF-PRT-14411 | Brand: SparkFun
The SparkFun LiPo Charger/Booster is a compact board that charges a single-cell lithium polymer battery and boosts its output to a regulated 5V at up to 1A. Built around the MCP73831 charge controller and PAM2401 boos...
Delivered by Mon 13 Jul
Switching Split Power Supply ± 12V 500mA Split Supply
SKU: AF-2591 | Brand: Adafruit
I know you just did a double take when looking at this power supply, what's up with the two cables? Normally you have a switching power supply that plugs into the wall and provides something like 5V or 9V or 12V regul...
Delivered by Wed 5 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared