All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
JST SH Jumper 6 Wire Assembly - 8
SKU: SF-PRT-10361 | Brand: SparkFun
This is a simple six wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 6-pin JST SH connector on t...
Delivered by Thu 16 Jul
Pan/Tilt Bracket
SKU: SF-ROB-10335 | Brand: SparkFun
This pan/tilt bracket kit includes two brackets and all the hardware needed to build a pan/tilt mechanism using two servo motors. Perfect for mounting cameras, sensors, or other small payloads that need two-axis posit...
Delivered by Tue 7 Jul
Voltage Regulator - 12V
SKU: SF-COM-12766 | Brand: SparkFun
The L7812 is a three-terminal positive voltage regulator with a fixed 12V output. It provides stable local regulation with built-in protection against overcurrent, thermal overload, and short circuits, making it a rel...
Delivered by Tue 7 Jul
Built-in Spring GSM Antenna
SKU: DF-FIT0454 | Brand: DFRobot
This is a small built-in spring GSM antenna with IPX connector. Its working frequency is 900/1800 MHz which meets most requirements of GSM applications. Its very compact size makes it easy to carry and use. ...
Delivered by Tue 7 Jul
DC Barrel Jack Adapter - Male
SKU: SF-PRT-10287 | Brand: SparkFun
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack...
Delivered by Tue 7 Jul
LiPower - Boost Converter
SKU: SF-PRT-10255 | Brand: SparkFun
The LiPower board is based on the incredibly versatile TPS61200 boost converter. The board is configured to be used with a LiPo battery, has solder jumper selectable 5V and 3.3V output, and an under voltage protection...
Delivered by Tue 7 Jul
SparkFun USB LiPoly Charger - Single Cell
SKU: SF-PRT-12711 | Brand: SparkFun
The SparkFun USB LiPoly Charger is a single-cell Li-Ion/Li-Polymer battery charging board based on the MCP73831T. It charges 3.7V LiPo cells at a selectable rate of 500 mA or 100 mA via a solder jumper, with power inp...
Delivered by Tue 7 Jul
Right-angle Mini GSM/Cellular Quad-Band Antenna - 2dBi SMA Plug
SKU: AF-1858 | Brand: Adafruit
This 2.2"/57mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Anten...
Delivered by Tue 7 Jul
Adafruit SPI Non-Volatile FRAM Breakout - 64Kbit / 8KByte
SKU: AF-1897 | Brand: Adafruit
The Adafruit SPI Non-Volatile FRAM Breakout provides 64 Kbit (8 KBytes) of ferroelectric RAM (FRAM) storage over SPI. FRAM combines the non-volatile retention of flash with the instant read/write speed of SRAM — no pa...
Delivered by Tue 7 Jul
3.5mm (1/8) Stereo DIY Plug
SKU: AF-1800 | Brand: Adafruit
A solder-on 3.5 mm (1/8") stereo audio plug for building custom audio cables. Made from durable metal with a flexible spring strain relief, it provides a solid, professional-quality connection. Solder your wires to th...
Delivered by Tue 7 Jul
SparkFun LiPo Charger Basic - Micro-USB
SKU: SF-PRT-10217 | Brand: SparkFun
If you need to charge LiPo batteries, this simple charger will do just that, and do it fast! The SparkFun LiPo Charger Basic is stripped down of all features and just does one thing well - charge 3.7V LiPo cells ...
Delivered by Tue 7 Jul
Micro Metal Gear Motor with Connector (30:1)
SKU: DF-FIT0467 | Brand: DFRobot
INTRODUCTION This motor has a long (0.365"/9.27 mm) D profile metal output shaft that matches the 42x19mm and 32x7mm dimensions of the Pololu wheel. The brass faceplate has two mounting h...
Delivered by Thu 16 Jul
PowerBoost 500 Basic - 5V USB Boost @ 500mA from 1.8V+
SKU: AF-1903 | Brand: Adafruit
The PowerBoost 500 Basic is a compact DC/DC boost converter that takes input from 1.8V or higher and outputs a steady 5.2V — perfect for powering portable 5V projects from batteries. The slightly elevated 5.2V output ...
Delivered by Wed 29 Jul
SparkFun Solder-able Breadboard - Large
SKU: SF-PRT-12699 | Brand: SparkFun
This is the Large SparkFun Solder-able Breadboard. A bare PCB that is the exact size as our full-size breadboard with the same connections to pins and power rails. This board is especially useful for preserving a prot...
Delivered by Thu 16 Jul
EL Wire - Orange 3m
SKU: SF-COM-10193 | Brand: SparkFun
EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a thin flexible neon tube. They come in many bright colors (check below f...
Delivered by Tue 7 Jul
EL Wire - Pink 3m
SKU: SF-COM-10198 | Brand: SparkFun
EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a thin flexible neon tube. They come in many bright colors (check below f...
Delivered by Tue 7 Jul
PaPiRus 2.7 eInk Display HAT for Raspberry Pi from Pi Supply
SKU: AF-3420 | Brand: Adafruit
The PaPiRus Screen HAT from Pi Supply is an ePaper / eInk screen HAT designed for the Raspberry Pi. Think of it as the older sibling of the PaPiRus Zero.ePaper / eInk is a display technology that mimics the appearance...
Delivered by Tue 7 Jul
EL Wire - Blue 3m
SKU: SF-COM-10195 | Brand: SparkFun
A 3-metre length of blue electroluminescent (EL) wire that produces a bright, even neon-like glow when driven by an AC inverter. The flexible, phosphor-coated wire is 2.3 mm in diameter and terminated with a JST PH co...
Delivered by Tue 7 Jul
1/4 (6.35mm) DIY Stereo In-Line Jack
SKU: AF-1804 | Brand: Adafruit
A durable 1/4" (6.35 mm) stereo in-line jack for building or repairing your own audio cables. The all-metal construction and flexible spring strain relief ensure a long-lasting, reliable connection. Simply solder you...
Delivered by Tue 7 Jul
Gravity: 130 DC Motor Module
SKU: DF-DFR0411 | Brand: DFRobot
INTRODUCTION This DC motor has an integrated transistor built in to the board, eliminating the need for a motor driver. Use PWM to control it for all your DIY project needs. It uses the 3 pi...
Delivered by Thu 16 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared