All Products

SKU: SF-COM-11629 | Brand: SparkFun

A smart 4-digit 7-segment display that combines a classic white LED display with an onboard ATmega328 microcontroller. Instead of wiring up dozens of pins, you control the entire display over Serial TTL, SPI, or I2C —...

SKU: DF-KIT0069 | Brand: DFRobot

The DFRobot Bluetooth 4.0 RGB LED Strip Kit combines a 3-metre WS2812 addressable LED strip with a Bluno (Arduino-compatible Bluetooth 4.0 board), sound sensor, and audio analyser. Control every individual LED from yo...

SKU: AF-65 | Brand: Adafruit

A tiny solderless breadboard that's half the size of a half-size breadboard — perfect for compact prototypes, small circuits, and sticking onto the top of Arduino protoshields. Specifications Dimensions – 46 × 36 m...

SKU: SF-DEV-13746 | Brand: SparkFun

The SparkFun Beefy 3 is an FTDI Basic Breakout board based on the FT231X USB-to-serial IC. Unlike standard FTDI breakouts, it features an AP2112K voltage regulator capable of supplying up to 600mA at 3.3V — enough to ...

SKU: AF-3070 | Brand: Adafruit

The Adafruit RFM69HCW Transceiver Radio Breakout @ 868/915 MHz is a breadboard-friendly packet radio module for adding long-range wireless communication to Arduino and other microcontroller projects. Based on the SX12...

SKU: AF-62 | Brand: Adafruit

This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP (among other things).3 feet / 1 meter longColor may vary!

SKU: DF-FIT0352 | Brand: DFRobot

LED Strips always glow nicely in the dark and are super fun to play with. They can be used in home decorations, festives and interactive art installations. For example this Christmas someone put a phone-controlled ...

SKU: PL-1133 | Brand: Pololu

This compact carrier board from Pololu makes it easy to integrate a Sharp GP2Y0D815Z0F, GP2Y0D810Z0F, or GP2Y0D805Z0F digital distance sensor into your project. It provides all the required external components, an on-...

SKU: SF-BOB-13717 | Brand: SparkFun

This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to breadboard-friendly arrangement and spacing, and even adds a couple of decou...

SKU: SF-COM-13716 | Brand: SparkFun

The FemtoBuck is a compact, single-channel constant-current LED driver capable of driving high-power LEDs at up to 350 mA with input voltages up to 36 V. Dimming is controlled via PWM or an analog signal (0–2.5 V), an...

SKU: DF-SEN0143 | Brand: DFRobot

This Infrared Proximity Sensor made by Sharp (model: GP2Y0A41SKOF) has an analog output which varies from 3.1V (4cm) to 0.3V (30cm) with a supply voltage between 4.5 and 5.5V DC. This sensor is great for sensing obje...

SKU: DF-SEN0168 | Brand: DFRobot

This Triple Axis Accelerometer with Bosch BMA220 is an ultra small triaxial, low-g acceleration sensor breakboard with SPI and I2C interface, aiming for low power consumer market applications. It allows measurem...

SKU: DF-TEL0073 | Brand: DFRobot

Bluno Bee is a serial to bluetooth 4.0 module, it adopts XBEE form factor which is compact and is compatible with all shields with XBEE socket. Bluno Bee is designed to have voltage regulator which supports bot...

SKU: SF-PRT-11542 | Brand: SparkFun

A standard 0.1" (2.54 mm) pitch male header pin strip with 10 pins, designed for surface-mount applications where through-hole pins are not suitable. The SMD legs are staggered for stress relief during soldering. Key...

SKU: SF-COM-13705 | Brand: SparkFun

The PicoBuck is a three-channel constant-current LED driver based on the AL8805. Each channel drives LEDs at 330 mA by default, with a solderable jumper to increase the maximum to 660 mA per channel. Dimming is contro...

SKU: AF-155 | Brand: Adafruit

This high-torque standard servo can rotate approximately 180 degrees (90 in each direction). You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move with...

SKU: AF-3000 | Brand: Adafruit

Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here - and it's the best way to practice programming on real hardware with no soldering or sew...

SKU: PL-1115 | Brand: Pololu

This double-row, 14-pin (2×7) extended male header with 0.1" (2.54mm) pitch features extra-long 22.85mm pins — significantly longer than standard headers. The extended length is useful for making connections that span...

SKU: PL-1114 | Brand: Pololu

This single-row, 2-pin extended male header with 0.1" (2.54mm) pitch features extra-long 22.85mm pins — significantly longer than standard headers. The extended length is useful for making connections that span greate...

SKU: SF-SEN-13676 | Brand: SparkFun

The SparkFun BME280 Atmospheric Sensor Breakout measures barometric pressure, humidity, and temperature in a compact package. Whether you're building a weather station, home automation system, or indoor air quality mo...