All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Interface Cable - RP-SMA Male to RP-SMA Female (1M, RG174)
SKU: SF-CAB-22036 | Brand: SparkFun
An RP-SMA (Reverse Polarity Sub-Miniature A) extension cable with male-to-female connectors and RG174 coaxial housing. Ideal for mounting an antenna to the outside of an enclosure while keeping the electronics inside....
Delivered by Mon 13 Jul
Cockatoo - Micro:bit simple screw-terminal breakout
SKU: LB-COCKATOO | Brand: Little Bird
The Cockatoo is a simple screw-terminal breakout board for the BBC micro:bit. Slide your micro:bit into the edge connector and you get secure screw terminal access to pins 0, 1, 2, 3.3V, and GND — no soldering or croc...
Delivered by Thu 2 Jul
Bad Influence Award Lapel Pin
SKU: JU-W-LP244 | Brand: Jubly-Umph
Wear your reputation with pride. This colourful hard enamel lapel pin celebrates those who challenge the status quo and push boundaries — a badge of honour for the proudly unconventional. Beautifully presented on a J...
Delivered by Thu 23 Jul
Interface Cable - RP-SMA Male to RP-SMA Female (25cm, RG174)
SKU: SF-CAB-22037 | Brand: SparkFun
A 25cm RP-SMA male-to-female extension cable with RG174 coaxial housing. Ideal for repositioning an antenna to the outside of an enclosure while keeping your electronics neatly inside, this cable provides a reliable R...
Delivered by Mon 13 Jul
Fucking Legend Lapel Pin
SKU: JU-W-LP246 | Brand: Jubly-Umph
Wear your achievements with pride. This bold lapel pin is a celebration of grit, resilience, and the courage to stand out — because getting where you are wasn't easy, and you've earned every bit of it. Crafted as a l...
Delivered by Thu 2 Jul
GNSS Multi-Band L1/L2/L5 Surveying Antenna - TNC (SPK6618H)
SKU: SF-GPS-21801 | Brand: SparkFun
The SPK6618H is the latest advancement in GNSS antenna technology allowing tri-band (L1/L2/L5) reception for GPS, GLONASS, Galileo, and BeiDou constellations. These 'UFO' antennas have incredible performance for the m...
Delivered by Mon 13 Jul
SparkFun Brushless Motor Driver - 3-Phase (TMC6300)
SKU: SF-ROB-21867 | Brand: SparkFun
The SparkFun 3-Phase Brushless Motor Driver, featuring the TMC6300 from ADI + Trinamic, is a powerful and easy-to-use three-phase motor driver that was designed to control our Brushless Gimbal Motor. It can be used...
Delivered by Mon 13 Jul
Kitronik Air Quality Datalogging Board for Pico
SKU: KI-5336 | Brand: Kitronik
The Kitronik Smart Air Quality Board provides a complete air monitoring and datalogging solution for the Raspberry Pi Pico. With an onboard BME688 environmental sensor, OLED display, real-time clock support, and Micro...
Delivered by Thu 2 Jul
Kitronik Tricolour LED Board
SKU: KI-35164 | Brand: Kitronik
The Kitronik TriColour LED board is a pre-built strip board designed for low-power lighting displays, such as edge-lit signs and illustrations. It has been designed such that its power requirement is within the sup...
Delivered by Thu 2 Jul
IT'S ALL GOING TO BE OKAY LAPEL PIN
SKU: JU-W-LP182 | Brand: Jubly-Umph
A colourful reminder that everything is going to work out. This limited edition hard enamel lapel pin from Jubly-Umph features a gold-backed finish and comes beautifully presented on a branded backing card. Pin it to...
Delivered by Thu 2 Jul
Adafruit CAN Bus FeatherWing - MCP2515
SKU: AF-5709 | Brand: Adafruit
The Adafruit CAN Bus FeatherWing adds CAN bus networking to any Feather board. It uses the MCP2515 CAN controller and TJA1051/3 transceiver to send and receive messages in standard or extended format at up to 1 Mbps o...
Delivered by Thu 2 Jul
Gravity: LTR390 UV Light Sensor (280nm to 430nm) - I2C & UART
SKU: DF-SEN0540 | Brand: DFRobot
The Gravity LTR390-UV sensor provides both ambient light and UV sensing with a UV spectral response from 280nm to 430nm. It features high sensitivity, quick response, and strong anti-interference performance. With a ...
Delivered by Mon 13 Jul
SparkFun USB-C Host Shield
SKU: SF-DEV-21247 | Brand: SparkFun
The SparkFun USB-C Host Shield provides all the digital logic and analogue circuitry needed to add USB peripheral/host control to your Arduino. Interface with and control any USB 2.0 compatible device — thumb drives, ...
Delivered by Thu 2 Jul
MP6550 Single Brushed DC Motor Driver Carrier
SKU: PL-4733 | Brand: Pololu
The MP6550 from Monolithic Power Systems (MPS) is an H-bridge motor driver IC that can be used for bidirectional control of one brushed DC motor at 1.8 V to 22 V. It can supply up to about 1.7 A continuously and featu...
Delivered by Thu 2 Jul
Gravity: CH423 I2C 24 Digital IO Expansion Module
SKU: DF-DFR0979 | Brand: DFRobot
The Gravity CH423 I2C 24 Digital IO Expansion Module extends your microcontroller with 24 additional digital output/input pins over a standard I2C connection. Based on the CH423 chip, it provides 8 GPIOs with interrup...
Delivered by Thu 2 Jul
Woven USB A Cable with Magnetic Tips - Micro B, Type C, and iOS
SKU: AF-5652 | Brand: Adafruit
Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully reversible pink/purple Blinka-inspired cable or this mithril-like 3-in-1 Syn...
Delivered by Thu 2 Jul
Adafruit PCA9546 4-Channel I2C Multiplexer
SKU: AF-5663 | Brand: Adafruit
Need to use multiple I2C devices that share the same address? The PCA9546 4-Channel I2C Multiplexer lets you connect up to four same-address I2C devices to a single microcontroller by acting as a gatekeeper — write a ...
Delivered by Fri 24 Jul
Snap Action 1-to-1 Wiring Block Connector - Pack of 5
SKU: AF-5619 | Brand: Adafruit
Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course, they are reusable and do not ...
Delivered by Thu 2 Jul
LattePanda DC 5.5x2.1mm Power Cable
SKU: DF-FIT0903 | Brand: DFRobot
The cable is compatible with LattePanda 2 Alpha&Delta, and LattePanda 3 Delta 864.With the DC 5.5x2.1mm Power Cable, LattePanda can be powered by a common 12V DC power supply or a 12V battery pack easily. Feat...
Delivered by Mon 13 Jul
Rainbow Allen Wrench / Hex Key Set - Metric 9 Piece
SKU: AF-5473 | Brand: Adafruit
Why settle for a boring old hex key set when you can get one with a burst of color like this 9 Piece Rainbow Metric Allen Wrench / Hex Key Set. If your DIY project has hexagonal screws, you’re gonna need hex keys (als...
Delivered by Fri 24 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
