All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
3.5mm (1/8) Stereo Audio Plug Terminal Block
SKU: AF-2790 | Brand: Adafruit
A 3.5 mm (1/8") stereo (TRS) audio plug with screw terminal connections — no soldering required. Use stranded or solid-core wire and a small screwdriver to create custom audio cables, breakouts, and test leads. This ...
Delivered by Wed 1 Jul
Adafruit Pi Protector for Raspberry Pi Model Zero
SKU: AF-2883 | Brand: Adafruit
The Adafruit Pi Protector for Raspberry Pi Zero is a minimal, crystal-clear acrylic protector that keeps your pocket-sized Pi Zero safe without adding bulk. Just two acrylic pieces secured with four screws — sleek, li...
Delivered by Wed 1 Jul
Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0
SKU: AF-2772 | Brand: Adafruit
The Feather M0 Basic Proto is the no-frills member of the Feather M0 family, built around the ATSAMD21G18 ARM Cortex M0 processor with a built-in prototyping area for soldering on extra components. With 256KB of flash...
Delivered by Wed 1 Jul
Mesh cable guide (1.25m) (49.21)
SKU: DF-FIT0250 | Brand: DFRobot
A 1.25 m braided mesh cable guide that bundles and protects your wiring. The flexible braid provides structure and rigidity to loose cables, and can be compressed to expand the opening — making it easy to feed multipl...
Delivered by Fri 10 Jul
SparkFun Ambient Light Sensor Breakout - TEMT6000
SKU: SF-BOB-08688 | Brand: SparkFun
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don’t. Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on the signal pin. Docu...
Delivered by Wed 1 Jul
DFRobot Leonardo with Xbee Socket (Arduino Compatible)
SKU: DF-DFR0221 | Brand: DFRobot
Featured in Make: The Maker's Guide to Boards, DFRobot Leonardo with Xbee Socket is an Arduino Leonardo variant processor.The Arduino Leonardo is based on the ATmega32u4 chip. It is the latest addition to the Ardu...
Delivered by Fri 10 Jul
Jumper Wire - JST Black Blue
SKU: SF-PRT-08671 | Brand: SparkFun
This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end, bare cable on the opposite end. Dimensions: 100mm length Documents: JST connector
Delivered by Wed 1 Jul
Xboard Relay - An Ethernet Controllered Relay
SKU: DF-DFR0222 | Brand: DFRobot
Internet of things has become so easy. With Xboard Relay, you can not only monitor data through internet, but also control it through internet. The Xboard Relay combines an Atmega 32u4 microprocessor and wi...
Delivered by Wed 1 Jul
Electret Microphone
SKU: SF-COM-08635 | Brand: SparkFun
Small electret microphone. Useful in acoustic and audio applications. Documents: Datasheet Example Audio LED control project by Adam Greig
Delivered by Wed 1 Jul
10 sets M3x10 screw low profile hex head cap screw
SKU: DF-FIT0270 | Brand: DFRobot
A 10-pack of M3 × 10mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...
Delivered by Wed 1 Jul
Romeo V2- Arduino Robot Board (Arduino Leonardo) with Motor Driver
SKU: DF-DFR0225 | Brand: DFRobot
RoMeo V2 [R3] is an All-in-One Arduino based robot board, it is especially designed for robotics applications, and extended devices. Romeo benefits from the Arduino open source platform, it is supported by thousand...
Delivered by Wed 1 Jul
Snap-Action Switch with 50mm Lever: 3-Pin, SPDT, 5A
SKU: PL-1403 | Brand: Pololu
This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch, but the long lever arm makes it especially useful as a tactile bump sensor for your robot (e.g whiskers or antennae...
Delivered by Wed 1 Jul
Flex Sensor 4.5
SKU: SF-SEN-08606 | Brand: SparkFun
A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Gl...
Delivered by Wed 1 Jul
10 sets M3x30 screw low profile hex head cap screw
SKU: DF-FIT0269 | Brand: DFRobot
A 10-pack of M3 × 30mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...
Delivered by Wed 1 Jul
8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards
SKU: AF-2928 | Brand: Adafruit
The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your mi...
Delivered by Wed 1 Jul
Micro Metal Gearmotor 30:1
SKU: DF-FIT0302 | Brand: DFRobot
This motor has a long (0.365" or 9.27 mm), D-shaped metal output shaft that matches the Pololu wheel 42x19mm and 32x7mm. The brass faceplate has two mounting holes threaded for M1.6 screws (1.6 mm diameter, 0.35...
Delivered by Wed 1 Jul
Resistor 330 Ohm 1/6th Watt PTH
SKU: SF-COM-08377 | Brand: SparkFun
1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limiters and are great for general use. Need more than one? Checkout our b...
Delivered by Wed 1 Jul
PICAXE 8 Pin Proto Kit
SKU: SF-DEV-08321 | Brand: SparkFun
The PICAXE 8 Pin Proto Kit is a beginner-friendly kit for getting started with 8-pin PICAXE microcontrollers. It includes a handful of easy-to-solder through-hole components and a proto board, making it an ideal first...
Delivered by Fri 10 Jul
Wixel Programmable USB Wireless Module (Fully Assembled)
SKU: PL-1336 | Brand: Pololu
The Pololu Wixel is a general-purpose programmable module featuring a 2.4 GHz radio and USB. You can write your own software or load precompiled, open-source apps onto the TI CC2511F32 microcontroller at the hea...
Delivered by Wed 1 Jul
SparkFun RedBoard - Programmed with Arduino
SKU: SF-DEV-13975 | Brand: SparkFun
At SparkFun we use many Arduinos and we’re always looking for the simplest, most stable one. Each board is a bit different and no one board has everything we want, so we decided to make our own version that combines a...
Delivered by Wed 1 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
