All Products
Browse the full range of electronics, components, and maker supplies available at Little Bird Electronics. From microcontrollers and sensors to connectors, tools, and development boards — everything you need for your next project is right here.
Whether you're a hobbyist, educator, student, or professional engineer, our catalogue covers robotics, IoT, STEM kits, 3D printing accessories, and thousands of electronic components with fast shipping across Australia.
Translucent Keycaps for MX Compatible Switches - 10 pack
SKU: AF-4956 | Brand: Adafruit
Get ready to clacky to your heart's content. Here is a 10 pack of translucent keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto a Cherry MX or compatible switch to turn your ...
Delivered by Wed 1 Jul
1.25mm Pitch 10-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
SKU: AF-4930 | Brand: Adafruit
This 1.25 mm pitch 10-pin cable is a compact, Molex PicoBlade-compatible connector cable for projects where standard 0.1″ headers are too bulky. At 20 cm long, it provides a convenient connection length for internal w...
Delivered by Thu 23 Jul
Ambient Light Sensor(0-200klx)
SKU: DF-SEN0390 | Brand: DFRobot
A high-precision ambient light sensor housed in a transparent semisphere case for optimal light-gathering performance. With a wide 0–200 klx detection range and I2C communication, this sensor is ideal for applications...
Delivered by Wed 1 Jul
Temperature Resistant Polyimide Tape 4mm x 30m
SKU: EC-P3D0107PT | Brand: Elecrow
The polyimide tape is an insulator resistant to high temperatures.It is an essential accessory for assembly and use of your 3D printer.Tape with polyimide film as the backing material coated high temperature resist...
Delivered by Wed 1 Jul
Flexible Qwiic Cable - 500mm
SKU: SF-PRT-17257 | Brand: SparkFun
This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from silicon mak...
Delivered by Fri 10 Jul
Gravity: Capacitive Fingerprint Sensor
SKU: DF-SEN0359 | Brand: DFRobot
A capacitive fingerprint sensor with integrated processing, storage, and matching built around the ID809 high-performance processor and IDfinger6.0 algorithm. The sensor handles all fingerprint recognition independent...
Delivered by Fri 10 Jul
Silicone Bumpers - 5x11mm (4 Pack)
SKU: SF-COM-17736 | Brand: SparkFun
Protect your board or project with this four pack of silicone bumpers! Rubber feet raise your PCB or project up off your desk. This helps prevent short circuiting from bits of scrap wire floating about or setting a pr...
Delivered by Fri 10 Jul
EasyESP-1: An ESP8266 experimenter board for beginners
SKU: EC-CDE82664E | Brand: Elecrow
The EasyESP-1 is a beginner-friendly development board for the ESP8266 Wi-Fi microcontroller, based on the ESP-12E module. It includes an onboard USB-to-serial converter (CP2102) so you can program and debug directly ...
Delivered by Wed 1 Jul
Universal Proto-board PCBs 3cm x 7cm - 3 Pack
SKU: AF-4784 | Brand: Adafruit
Here's a handy 3-pack of 3cm x 7cm Proto-board PCBs in Adafruit Black. Both sides have a black silkscreen with some row/column markings. Note that these don't have any traces between the PCB holes, you would normally ...
Delivered by Thu 23 Jul
Adafruit EMC2101 I2C PC Fan Controller and Temperature Sensor - STEMMA QT / Qwiic
SKU: AF-4808 | Brand: Adafruit
The Adafruit EMC2101 breakout is an I2C fan controller and temperature sensor that makes it easy to integrate 3-pin or 4-pin PC fans into your projects. The Microchip/SMSC EMC2101 handles PWM speed control and tachome...
Delivered by Thu 23 Jul
NRF24L01 Wireless Shield SPI to I2C Interface for Arduino
SKU: EC-CNRF24L01I | Brand: Elecrow
This is a platform using the ATMEGA48 to help you using the NRF24L0 Module easily. It uses the I2C (TWI) communication protocol to communicate with other controller such as the Arduino thus to simplify the NRF24L01 co...
Delivered by Wed 15 Jul
GPS Antenna Ground Plate
SKU: SF-GPS-17519 | Brand: SparkFun
Many magnetic mount GPS antennas rely on being mounted on a car or other large metallic object to provide a good ground plane. But what if you want to use an antenna not on a car? The GPS Antenna Ground Plate is the s...
Delivered by Fri 10 Jul
Adafruit Metro ESP32-S2
SKU: AF-4775 | Brand: Adafruit
The Adafruit Metro ESP32-S2 combines the popular Arduino UNO shield-compatible Metro form factor with the ESP32-S2 WiFi module. Featuring native USB, 4 MB flash, and 8 MB PSRAM, this board is ideal for WiFi-connected ...
Delivered by Wed 1 Jul
SparkFun Qwiic Shield for Teensy - Extended
SKU: SF-DEV-17156 | Brand: SparkFun
An extended Qwiic shield that adds four Qwiic connectors to Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Connects the I²C bus (GND, 3.3 V, SDA, SCL) to two horizontal and two vertical Qwiic ports for easy daisy-chai...
Delivered by Wed 1 Jul
Small Pipe Diameter Level Sensor
SKU: DF-SEN0370 | Brand: DFRobot
A non-contact capacitive liquid level sensor designed for small-diameter pipes (outer diameter ≤10 mm). Detects the presence or absence of liquid through the pipe wall without any physical contact with the liquid — ma...
Delivered by Fri 10 Jul
Replacement CSI/DSI Connector for Raspberry Pi - Repair Part
SKU: AF-4728 | Brand: Adafruit
A replacement CSI/DSI flex connector for the Raspberry Pi. If the camera or display connector on your Pi has been damaged — snapped arms, broken latch — this part lets you rework it rather than replacing the entire bo...
Delivered by Thu 23 Jul
1.25mm Pitch 3-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible
SKU: AF-4721 | Brand: Adafruit
This matching pair of 1.25 mm pitch 3-pin cables includes an inline socket and plug connector, providing a complete Molex PicoBlade-compatible connection set. At 40 cm long, these cables offer plenty of reach for inte...
Delivered by Thu 23 Jul
64x64 RGB LED Matrix - 3mm Pitch - 192mm x 192mm
SKU: AF-4732 | Brand: Adafruit
The 64×64 RGB LED Matrix with 3mm pitch features 4096 bright RGB LEDs in a 192×192mm panel. This high-density display offers a good balance between pixel density and panel size, suitable for indoor signage and video w...
Delivered by Thu 23 Jul
Mini Basic PIR Sensor - BS412
SKU: AF-4666 | Brand: Adafruit
A compact passive infrared (PIR) motion sensor that detects movement from approximately 3–8 metres away. Much smaller than standard PIR modules, making it ideal for unobtrusive, space-constrained projects. Fully self-...
Delivered by Thu 23 Jul
SparkFun OpenLog Artemis
SKU: SF-DEV-16832 | Brand: SparkFun
The SparkFun OpenLog Artemis is an open source data logger that comes preprogrammed to automatically log IMU, GPS, serial data, and various pressure, humidity, and distance sensors. All without writing a single line o...
Delivered by Fri 10 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
The Maker's Guide to Servos: Torque, Speed, and Control Compared
Compare hobby and industrial servos by torque, rotation range, and control type (PWM, digital, continuous) to pick the right motor for robotics, animatronics, and RC projects.
16 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
