All Products

SKU: AF-4711 | Brand: Adafruit

The AP3429A Buck Converter Breakout steps down 3.4–5.5V input to a stable 3.3V output at up to 1.2A, with 90–95% efficiency. It's ideal for powering 3.3V circuits from LiPo batteries, 3× alkaline cells, or USB power s...

SKU: AF-4685 | Brand: Adafruit

A comprehensive 420-piece set of black nylon M3 screws, nuts, and hex standoffs in a reusable storage container. Nylon fasteners are non-conductive, making them ideal for mounting PCBs and breakout boards without inte...

SKU: AF-4684 | Brand: Adafruit

These incredibly small surface-mount LEDs are an easy way to add a lot of very tiny (but bright!) colorful dots to your project. They are just mind-bogglingly small - 2mm square. As they are pretty darn tiny, the...

SKU: AF-4687 | Brand: Adafruit

The Adafruit 2.13" Monochrome E-Ink Bonnet brings crisp, paper-like displays to your Raspberry Pi with no soldering required. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying h...

SKU: RP-SC0450 | Brand: Raspberry Pi Ltd

Red T-shirt White Logo Adult Size Small. Sizing is to a standard UK high-street size, and the shirts fit true to size. We recommend purchasing your usual size. If you fall between two sizes, we advise purcha...

SKU: RP-SC0452 | Brand: Raspberry Pi Ltd

Red T-shirt White Logo Adult Size Large. Sizing is to a standard UK high-street size, and the shirts fit true to size.  We recommend purchasing your usual size.  If you fall between two sizes, we advise p...

SKU: DF-FIT0662-1 | Brand: DFRobot

Note: The kits include two pairs of Mecanum wheels: two left-handed wheels and two right-handed wheels. Please pay attention to the L and R noted on the back of the product when installing,What wheels should...

SKU: EC-PCW10301C | Brand: Elecrow

This is a Type-B USB cable, which is compatible with Arduino Uno. It's a 3m cable and long enough for normal use.

SKU: DF-FIT0663 | Brand: DFRobot

This is a micro-mini HDMI (M/F) adapter for Raspberry Pi 4B. It supports 4K high resolution, and provides efficient and stable signal transmission without attenuation and delay. Plug and play, easy to use. With this a...

SKU: EC-ARS27361T | Brand: Elecrow

This motor shield uses dual TB6612 MOSFET drivers and a PCA9685PW I2C PWM controller to drive up to 4 DC motors or 2 stepper motors from an Arduino or compatible board. All motor control and speed management is handle...

SKU: EC-ACS15238R | Brand: Elecrow

The RFM69HCW is an inexpensive and versatile radio module that operates in the unlicensed ISM (Industry, Science and Medicine) band, a set of frequencies set aside for low-power, short-range, license-free radios. I...

SKU: EC-ACA30002A | Brand: Elecrow

The Component Kit for Arduino E3 is a starter-friendly assortment of essential electronic components for use with any Arduino-compatible board. It includes a broad range of resistor values, LEDs in four colours, tacti...

SKU: DF-DFR0647 | Brand: DFRobot

A compact 0.91-inch monochrome OLED display module with 128×32 white self-illuminating pixels, driven by the SSD1306 over I2C. The chip-on-back pad design and ultra-narrow PCB (41 × 12 mm) make it ideal for wearables,...

SKU: AF-4544 | Brand: Adafruit

Better grab your sunglasses, your sunscreen, and a bucket hat because these NeoPixels feature a 3W RGB LED and are so bright it's like taking a vacation ON THE SUN. Alright maybe we're exaggerating, but these are real...

SKU: AF-4488 | Brand: Adafruit

The Adafruit LIS2MDL is a triple-axis magnetometer (compass) breakout from ST, capable of sensing magnetic fields across a wide ±50 gauss (±5000 µT) range with no range configuration required. It's ideal for detecting...

SKU: EC-SEM0001T | Brand: Elecrow

*micro:bit not includedElecrow Crowtail Learning Starter Kit for Micro:bit 2.0 Graphical Programming DIY Program Modules with 20 Lessons for Beginners DescriptionThe elecrow start kit for Micro: bit can work with...

SKU: EC-RPA05036T | Brand: Elecrow

The 2-in-1 TF Card Dual System Switcher lets you install two MicroSD (TF) cards on a single Raspberry Pi and switch between them using a physical toggle. This allows you to run two different operating systems and swap...

SKU: EC-ASVS1053MP | Brand: Elecrow

An Arduino-compatible MP3 shield based on the VS1053B audio codec from VLSI. It decodes all major audio formats — including MP3, OGG Vorbis, AAC, WMA, FLAC, WAV, and MIDI — and can record in Ogg Vorbis, IMA ADPCM, and...

SKU: AF-4407 | Brand: Adafruit

The Adafruit MLX90640 IR Thermal Camera Breakout features a 24×32 array of infrared thermal sensors that returns 768 individual temperature readings over I2C. It's an affordable way to add heat-vision to any microcont...

SKU: EC-DRA43145S | Brand: Elecrow

This black acrylic case is designed to house and protect the official Raspberry Pi 7-inch touchscreen display. It consists of three layers of acrylic plate with two triangular support brackets, creating a stable, free...